[1] LI J T,DONG X H,HUANG J H.Progress in microforming[J].Journal of Plasticity Engineering,2004,11(4):1-8(in Chinese).
[2] WANG Y,ZHOU J Zh,DAI Y Ch,et al.Application of micro forming technology in plastic processing[J].Forging Stamping Technology,2004,30(6):81-86(in Chinese).
[3] MAGEE J,WATKINS K G,STEEN W M.Advances in laser forming[J].Journal of Laser Applications,1988,10(6):235-246.
[4] KRATKY A,LIEDL G,BIELAK R.Laser assisted deep drawing[J].Laser Assisted Machining,2004(4):1125-1134.
[5] LIU W K,CAO J,LU H Sh,et al.A multi-scale simulation of microforming process with RKEM[J].Materials Processing and Design:Modeling,Simulation and Application,2004,712(34):103-108.
[6] XU G L,WANG X M.Engineering heat transfer[M].Beijing:China Electric Power Press,2005:236-237(in Chinese).
[7] LKEUCHIK M F,LIAO J.Weld HAZ toughness and its improvement of low alloy steel SQV-2A for pressure vessels[J].Transactions of Joining and Welding Research Institute,1993,22 (2):215-221.
[8] TIAN D,KARJALAINEN L P,NETAL Q B.Cleavage fracture model for granular bainite in simulated coarse-grained heat-affected zones of high-strength low-alloyed steels[J].JSME International Journal Series,1997,40(2):179-188.
[9] LIU Sh H,JI Q J,YANG J.Numerical simulation on laser bending of steel tubes[J].Laser Technolgoy,2006,30(4):355-359(in Chinese).
[10] WANG Y,TAN J G,YANG L J.The experimental study on laser bending of sheet metals[J].Journal of Optoelectronics·Laser,2003,14(4):415-418(in Chinese).