[1] SUN H L,LIN Sh Zh.Error analysis on dual-lens laser scanning proc-ess[J].Laser & Infrared,2005,35(3):161-163(in Chinese).
[2] JIANG H H.Development and prospect of application of laser cutting technique[J].Optoelectronic Technology and Information,2001,14(4):1-12(in Chinese).
[3] CHEN Zh,LIU X D.Research on fast software calibration arithmetic of laser lens scanning system[J].Journal of Huazhong University of Science and Technology,2003,31(5):68-69(in Chinese).
[4] WANG H Q,SHI Y Sh,HUANG Sh H.Control arithmetic and application of 3-D dynamic focusing laser lens scanning system[J].Journal of Huazhong University of Science and Technology,2003,31(5):70-71(in Chinese).
[5] GUO F,HU B,YING H Sh.Hardware calibration of geometric distortion of dual-lens scan[J].Laser Technology,2003,27(4):337-341(in Chinese).
[6] LONG Y H,XIONG L C,SHI T L.The quality study on excimer laser-induced electrochemical etching of silicon[J].Laser Technology,2006,30(3):235-237(in Chinese).
[7] WANG J Zh,SHI T L,XIONG L C.A shortened procedure of micro-electromechanical systems fabrication by means of femtosecond laser[J].Laser Technology,2008,32(1):88-91(in Chinese).
[8] ZHU L Q.Error analysis and calibration technique of dual-lens 2-D scanning system[J].Applied Laser,2001,20(5):325-327(in Chinese).
[9] WAN Zh,DU W X.Calibration of graphic distortion and compensation of exposure for dual galvanometer scanning[J].Optics and Precision Engineering,2000,8(2):115-118(in Chinese).
[10] GEDACH K H,JERSCH J,DICHMANN K,et al.Design and performance of an excimer laser based optical system for high precision micro-structuring[J].Optics and Laser Technology,1997,29(8):439.