[1] CHEN Z Y, LIU Y Y, JIN Y F, et al. Research on 650℃ high temperature titanium alloy technology for aero-engine[J]. Aeronautical Manufacturing Technology, 2019, 62(6): 22-30(in Chinese).
[2] KOIZUMI H, TAKEUCHI Y, IMAI H, et al. Application of titanium and titanium alloys to fixed dental prostheses[J]. Journal of Prosthodontic Research, 2019, 63(3): 266-270. doi: 10.1016/j.jpor.2019.04.011
[3] LENIVTSEVA G O, MUL D O, BATAEV A I, et al. Structure and tribological properties of steel after non-vacuum electron beam cladding of Ti, Mo and graphite powders[J]. Materials Characterization, 2016, 112: 60-67. doi: 10.1016/j.matchar.2015.11.028
[4] YOU Ch Ch, XIAO H Q, REN L R, et al. Microstructure and pro-perties of laser cladding Ti-Al-N composite coating on TC4 surface[J]. Laser Technology, 2021, 45(5): 585-589(in Chinese).
[5] TANG Y X, PENG J H, SU D Y, et al. Wear behavior of hard coatings against TC4 Ti-alloy: An experimental study[J]. Rare Metals and Cemented Carbides, 2020, 40(3): 5-10(in Chinese).
[6] ZHANG T G, ZHANG Q, ZHUANG H F, et al. Microstructure and properties of Ti2SC-Ti2Ni composite structural phase self-lubricating laser cladding layer on TC4 surface[J]. Acta Optica Sinica, 2020, 40(11): 1114001(in Chinese). doi: 10.3788/AOS202040.1114001
[7] LIAO Y J L, GU L, LIU S Y, et al. Research status of machining γ-TiAl intermetallic compounds both in china and overseas[J]. Aeronautical Manufacturing Technology, 2020, 63(4): 22-33(in Chin-ese).
[8] CHEN Sh G, ZHANG X M, ZHENG Q Ch, et al. Effect of CeO2 on microstructure and properties of Ni60 alloy coating by laser cladding[J]. Laser Technology, 2017, 41(6): 904-908(in Chinese).
[9] HE Y Y, LIU Y J, CHEN M, et al. Study on effect of laser scanning speed on microstructure and properties of cladding layer[J]. Laser Technology, 2019, 43(2): 201-204(in Chinese).
[10] WU X Q, XIE F Q, HU Z Ch, et al. Effect of diffusion treatment on high temperature friction and wear resistance of aluminium-plated TiAl alloy[J]. Transactions of Materials and Heat Treatment, 2010, 119(5): 113-117(in Chinese).
[11] ZHENG Ch K, ZHANG W W, ZHANG D T, et al. Low cycle fatigue behavior of T4-treated Al-Zn-Mg-Cu alloys prepared by squeeze casting and gravity die casting[J]. Transactions of Nonferrous Me-tals Society of China, 2015, 25(11): 3505-3514. doi: 10.1016/S1003-6326(15)63992-9
[12] HUANG G, SU Y, DUAN Zh Y, et al. Microstructure of Fe powder on laser-cladded Ti6Al4V alloy[J]. Shanghai Metals, 2013, 35(2): 22-26(in Chinese).
[13] XU R H, LI X F, ZUO D W, et al. Microstructure and hardness of NiCoCrAlY coatings on titanium alloy by laser cladding with different scanning speeds[J]. Chinese Journal of Rare Metals, 2014, 38(5): 807-812(in Chinese).
[14] KOOI B J, PEI Y T, HOSSON J T M D. The evolution of microstructure in a laser clad TiB-Ti composite coating[J]. Acta Materialia, 2003, 51(3): 831-845. doi: 10.1016/S1359-6454(02)00475-5
[15] ZHANG H W, ZHANG D L, ZHANG T G, et al. Microstructure and tribological properties of in-situ TiC reinforced Ti-based compo-site coating by laser cladding on TC4 surface[J]. Laser and Opto-electronics Progress, 2021, 58(1): 0114001(in Chinese). doi: 10.3788/LOP202158.0114001
[16] LIU D, ZHANG L J, MI L, et al. Preparation and application status of TiAl alloy[J]. Progress in Titanium Industry, 2014, 31(4): 11-15(in Chinese).
[17] LIU H X, LI Q L, ZHANG X W, et al. Microstructures and property of Ti-Al intermetallic compound composite coating prepared by laser cladding[J]. Chinese Journal of Nonferrous Metals, 2017, 27(6): 1140-1147(in Chinese).
[18] MALIUTINA I N, SI-MOHAND H, SIJOBERT J, et al. Structure and oxidation behavior of γ-TiAl coating produced by laser cladding on titanium alloy[J]. Surface & Coatings Technology, 2017, 319: 136-144.
[19] CÁRCEL B, SERRANO A, ZAMBRANO J, et al. Laser cladding of TiAl intermetallic alloy on Ti6Al4V -process optimization and properties[J]. Physics Procedia, 2014, 56: 284-293. doi: 10.1016/j.phpro.2014.08.173
[20] KOU H Ch, CHENG L, TANG B, et al. Progress on hot-forming techniques of high temperature TiAl alloys[J]. Aeronautical Manufacturing Technology, 2016, 59(21): 24-27(in Chinese).
[21] ZHOU J. Effect of nano-Y2O3 on high properties and heat treatment microstructure transformation of Ti-48Al-2Cr-2Nb alloy[D]. Harbin: Harbin Institute of Technology, 2018: 6-9(in Chinese).
[22] LI H. Research on microstructure and properties of β-γ type TiAl a-lloy[D]. Shenyang: Shenyang Aerospace University, 2019: 4-9(in Chinese).
[23] LIU Zh Q, XU G J, MA R X. Properties of TiAl alloy prepared by additive manufacturing with laser coaxial powder feeding[J]. Chin-ese Journal of Lasers, 2019, 46(3): 0302016(in Chinese). doi: 10.3788/CJL201946.0302016
[24] ZHANG J Q, ZHANG D Q, GUO Zh J, et al. Effects of hot and cold lashing on the microstructure and properties of laser cladding coating[J]. Mechanical Design and Manufacturing, 2016, 309(11): 212-214(in Chinese).
[25] WANG Y J, LI F, GU Y P, et al. The microstructure of Ti-45Al-7Nb-0.2B-0.1Hf-0.1Y alloy[J]. Journal of Shenyang Aerospace University, 2015, 32(1): 56-59(in Chinese).
[26] MICHAEL S K, SONALIKA G, FERESHTEH E, et al. Effect of microstructural parameters on the mechanical behavior of TiAlNb(Cr, Mo) alloys with γ+δ microstructure at ambient temperature[J]. Journal of Alloys and Compounds, 2017, 695: 2672-2674. doi: 10.1016/j.jallcom.2016.11.181