[1] LU B H, LI D C. Development of additive manufacturing (3-D printing) technology[J]. Machine Building & Automation, 2013, 42 (4): 1-4(in Chinese).
[2] LI N, HUANG S, ZHANG G, et al. Progress machine building & automation in additive manufacturing on new materials: A review[J]. Journal of Materials Science & Technology, 2019, 35(2): 242-269.
[3] WANG D, YANG Y Q, WU W H. Process optimization for 316L stainless steel by fiber laser selective melting[J]. Chinese Journal of Lasers, 2009, 36(12): 3233-3239(in Chinese). doi: 10.3788/CJL20093612.3233
[4] ZHANG W Q, ZHU H H, HU Z H, et al. Study on the selective laser melting of AlSi10 Mg[J]. Acta Metallurgica Sinica, 2017, 53 (8): 918-926(in Chinese).
[5] SHEYDAEIAN E, TOYSERKANI E. A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering[J]. Composites Part B: Engineering, 2018, 138(8): 140-148.
[6] VAITHILINGAM J, KILSBY S, GOODRIDGE R D, et al. Functionalization of Ti6Al4V components fabricated using selective laser melting with a bioactive compound[J]. Materials Science and Engineering, 2015, C46(1): 52-61.
[7] LIU S, SHIN Y C. Additive manufacturing of Ti6Al4V alloy: A review[J]. Materials & Design, 2019, 164(2): 107552.
[8] LIU J, SUN Q, WANG X, et al. Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting[J]. Materials Science and Engineering, 2019, A766(8): 138319.
[9] XU W, BRANDT M, SUN S, et al. Additive manufacturing of strong and ductile Ti6Al4V by selective laser melting via in situ martensite decomposition[J]. Acta Materialia, 2015, 85(2): 74-84.
[10] HANG Q, HEN J, ZHAO Z, et al. Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy[J]. Materials Science and Engineering, 2016, A 673(9): 204-212.
[11] BUSH R W, BRICE C A. Elevated temperature characterization of electron beam freeform fabricated Ti6Al4V and dispersion strengthened Ti8AlEr[J]. Materials Science and Engineering, 2012, A554(9): 12-21.
[12] BRICE C, SHENOY R, KRAL M, et al. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing[J]. Materials Science and Engineering, 2015, A648(C): 9-14.
[13] CHUNPING H, XIN L, FENCHENG L, et al. Effects of cooling condition on microstructure and mechanical properties in laser rapid forming of 34CrNiMo6 thin-wall component[J]. The International Journal of Advanced Manufacturing Technology, 2016, 82(5/8): 1269-1279. doi: 10.1007/s00170-015-7453-z/metrics
[14] MARTIN J H, YAHATA B D, HUNDLEY J M, et al. 3-D printing of high-strength aluminum alloys[J]. Nature, 2017, 549(7672): 365-369. doi: 10.1038/nature23894
[15] BRIF Y, THOMAS M, TODDI. The use of high-entropy alloys in additive manufacturing[J]. Scripta Materialia, 2015, 99(4): 93-96.
[16] LI R, NIU P, YUAN T, et al. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property[J]. Journal of Alloys and Compounds, 2018, 746(5): 125-134.
[17] KARLSSON D, MARSHAL A, JOHANSSON F, et al. Elemental segregation in an AlCoCrFeNi high-entropy alloy—a comparison between selective laser melting and induction melting[J]. Journal of Alloys and Compounds, 2019, 784(5): 195-203.
[18] LUO S, GAO P, YU H, et al. Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior[J]. Journal of Alloys and Compounds, 2019, 771(1): 387-397.
[19] ZHOU P F, XIAO D H, WU Z, et al. Al0.5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders[J]. Materials Science and Engineering, 2019, A739(1): 86-89.
[20] YU Zh T, YU S, CHENG J, et al. Development and application of novel biomedical titanium alloy materials[J]. Acta Metallurgica Sinica, 2017, 53 (10): 1238-1264(in Chinese).
[21] SHI Q, GU D, XIA M, et al. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites[J]. Optics & Laser Technology, 2016, 84(4): 9-22.
[22] JINGANG X, YONG C, HUI C, et al. Influence of process parameters on forming defects of H13 steel processed by selective laser melting[J]. Laser & Optoelectronics Progress, 2018, 55(4): 041405.
[23] LEUDERS S, THONE M, RIEMER A, et al. On the mechanical behavior of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance[J]. International Journal of Fatigue, 2013, 48(1): 300-307.
[24] SHUAI L I, CHONGGUI L I, QUNSEN Z, et al. Research status and prospect of additive manufacturing in laser by aluminum alloy[J]. Light Industry Machinery, 2017, 49 (3): 23-26.
[25] YUAN X, WEI Q, WEN S, et al. Research on selective laser melting AlSi10Mg alloy powder[J]. Hot Working Technology, 2014, 4: 99-102.
[26] SHUANGYIN Z, XIN L, JING C, et al. Influence of heat treatment on residual stress of Ti6Al4V alloy by laser solid forming[J]. Rare Metal Materials and Engineering, 2009, 38(5): 774-778.
[27] ZHANG S, GUI R, WEI Q S, et al. Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting[J]. Journal of Mechanical Engineering, 2013, 49(23): 21-27. doi: 10.3901/JME.2013.23.021
[28] LAI Y B, LIU W J, ZHAO J B, et al. Experimental study on residual stress in titanium alloy laser additive manufacturing[J]. Applied Mechanics and Materials, 2013, 431: 20-26. doi: 10.4028/www.scientific.net/AMM.431.20
[29] WANG Z, GUAN K, GAO M, et al. The microstructure and mechanical properties of deposited-IN718 by selective laser melting[J]. Journal of Alloys and Compounds, 2012, 513(2): 518-523.
[30] ZHANG J, LI Sh, WEI Q S, et al. Cracking behavior and inhibiting process of Inconel 625alloy formed by selective laser melting[J]. Chinese Journal of Rare Metals, 2015, 39 (11) : 961-966(in Chinese).
[31] DING J, COLEGROVE P, MEHNEN J, et al. A computationally efficient finite element model of wire and arc additive manufacture[J]. The International Journal of Advanced Manufacturing Technology, 2014, 70(1/4): 227-236. doi: 10.1007/s00170-013-5261-x
[32] WANG T, ZHANG A F, LIANG Sh D, et al. Research on as-deposited microstructures and properties of IN718parts by ultrasonic vibration-assisted laser metal forming[J]. Chinese Journal of Lasers, 2016, 43 (11) : 1102005(in Chinese). doi: 10.3788/CJL201643.1102005
[33] TOLOCHKO N K, MOZZHAROV S E, YADROITSEV I A, et al. Balling processes during selective laser treatment of powders[J]. Rapid Prototyping Journal, 2004, 10(2): 78-87. doi: 10.1108/13552540410526953
[34] WANG D, WU S, FU F, et al. Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties[J]. Materials & Design, 2017, 117(3): 121-130.
[35] SCHWEIER M, HEINS J F, HAUBOLD M W, et al. Spatter formation in laser welding with beam oscillation[J]. Physics Procedia, 2013, 41: 20-30. doi: 10.1016/j.phpro.2013.03.047
[36] PUPO Y, MONROY K P, CIURANA J. Influence of process parameters on surface quality of CoCrMo produced by selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8): 985-995. doi: 10.1007/s00170-015-7040-3
[37] ZHAO S M, SHEN X F, YANG J L, et al. Investigation of densification, microstructural and mechanical properties of water-atomized 316L stainless steel parts fabricated by selective laser melting[J]. Applied Laser, 2017, 37(3): 319-326(in Chinese).
[38] ABOULKHAIR N T, EVERITT N M, Ashcroft I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting[J]. Additive Manufacturing, 2014, 1/4: 77-86. doi: 10.1016/j.addma.2014.08.001
[39] SING S L, YEONG W Y, WIRIA F E, et al. Characterization of titanium lattice structures fabricated by selective laser melting using an adapted compressive test method[J]. Experimental Mechanics, 2016, 56(5): 735-748. doi: 10.1007/s11340-015-0117-y
[40] YADROITSEV I, SMUROV I. Surface morphology in selective laser melting of metal powders[J]. Physics Procedia, 2011, 12: 264-270. doi: 10.1016/j.phpro.2011.03.034
[41] WU W H, XIAO D M, YANG Y Q, et al. Analysis on powder adhesion problems in selective laser melting forming process[J], Hot Working Technology, 2016, 45(24): 43-47(in Chinese).
[42] YANG T, LIU T, LIAO W, et al. The influence of process parameters on vertical surface roughness of the AlSi10Mg parts fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 2019, 266: 26-36. doi: 10.1016/j.jmatprotec.2018.10.015
[43] TIAN Y, TOMUS D, ROMETSCH P, et al. Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting[J]. Additive Manufacturing, 2017, 13(1): 103-112.
[44] GE Y N, WU M P, MAO Y Y, et al. Effect of scanning strategy on forming precision of titanium alloy by selective laser melting[J]. Laser & Optoelectronics Progress, 2018, 55(9): 091403(in Chinese).
[45] BALC N, COSMA S C, KESSLER J, et al. Research on improving the outer surface quality of the parts made by SLM[J]. Applied Mechanics and Materials, 2015, 808: 199-204. doi: 10.4028/www.scientific.net/AMM.808.199
[46] YAN A R, YANG T T, WANG Y L, et al. Forming process and high-temperature mechanical properties of variable energy laser selective melting manufacturing IN718 superalloy[J]. Optics and Precision Engineering, 2015, 23(6): 1695-1704(in Chinese). doi: 10.3788/OPE.20152306.1695
[47] SAVALANI M M, PIZARRO J M. Effect of preheat and layer thickness on selective laser melting (SLM) of magnesium[J]. Rapid Prototyping Journal, 2016, 22(1): 115-122. doi: 10.1108/RPJ-07-2013-0076
[48] YASA E, KTUTH J P. Application of laser re-melting on selective laser melting parts[J]. Advances in Production Engineering and Management, 2011, 6(4): 259-270.
[49] ALRBAEY K, WIMPENNY D, TOSI R, et al. On optimization of surface roughness of selective laser melted stainless steel parts: A statistical study[J]. Journal of Materials Engineering and Performance, 2014, 23(6): 2139-2148. doi: 10.1007/s11665-014-0993-9
[50] VAITHILINGAM J, GOODRIDGE R D, HAGUE R J M, et al. The effect of laser remelting on the surface chemistry of Ti6Al4V components fabricated by selective laser melting[J]. Journal of Materials Processing Technology, 2016, 232(6): 1-8.
[51] BUCHBINDER D, SCHLEIFENBAUM H, HEIDRICH S, et al. High power selective laser melting (HP SLM) of aluminum parts[J]. Physics Procedia, 2011, 12(A): 271-278.
[52] BARTKOWIAK K, ULLRICH S, FRICK T, et al. New developments of laser processing aluminum alloys via additive manufacturing technique[J]. Physics Procedia, 2011, 12(A): 393-401.
[53] FLYNN J M, SHOKRANI A, NEWMAN S T, et al. Hybrid additive and subtractive machine tools-research and industrial developments[J]. International Journal of Machine Tools and Manufacture, 2016, 101(2): 79-101.
[54] HANSEL A, MORI M, FUJISHIMA M, et al. Study on consistently optimum deposition conditions of typical metal material using additive/subtractive hybrid machine tool[J]. Procedia CIRP, 2016, 46: 579-582. doi: 10.1016/j.procir.2016.04.113
[55] SONG Ch H, WENG Ch W, YANG Y Q, et al. Development status and trend for the equipment of selective laser melted[J]. Mechanical & Electrical Engineering Technology, 2017, 46(10): 1-5(in Chinese).
[56] LU B H. Additive manufacturing—Current situation and future[J]. China Mechanical Engineering, 2020, 31 (1): 19-23(in Chinese).
[57] YASA E, KRUTH J P, DECHERS J. Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting[J]. CIRP Annals, 2011, 60(1): 263-266. doi: 10.1016/j.cirp.2011.03.063
[58] DU W, BAI Q, ZHANG B. A novel method for additive/subtractive hybrid manufacturing of metallic parts[J]. Procedia Manufacturing, 2016, 5: 1018-1030. doi: 10.1016/j.promfg.2016.08.067
[59] LI Q Y, LI D Ch, ZHANG A F, et al. Development and challenge of laser cladding deposition and machining composite manufacturing technology[C]//Intelligentization and Refinement of Special Processing Technology Proceedings of the 17th National Special Processing Academic Conference (Abstract). Suzhou: Non-traditional Machining Branch, Chinese Mechanical Engineering Society, 2017: 66-79(in Chinese).
[60] ZHANG J T, ZHANG W, LI Y J, et al. Laser deposition additive/subtractive hybrid manufacturing process for stainless steel powder based on DMG MORI LASERTEC 65 3D[J]. Materials Science and Engineering of Powder Metallurgy, 2019, 23(4): 368-374(in Chinese).
[61] SITTHI-AMORN P, RAMOS J E, WANG Y, et al. MultiFab: A machine vision assisted platform for multi-material 3-D printing[J]. ACM Transactions on Graphics (Tog), 2015, 34(4): 1-11.
[62] WOHLERS T, CAFFREY T. 3D printing and additive manufacturing state of the industry annual worldwide progress report[J]. Wohlers Report, 2014, 70(1/4): 227-236.
[63] CAO J, ZHU H B, BAO F et al. Status quo and prospect of 3-D printing research for rail transit sector[J]. Locomotive & Rolling Stock Technology, 2018, 3(6): 10-11(in Chinese).
[64] MA M M, TAN M Z, SUN D X, et al. Fabrication of transmission part in high-voltage earthing switch by selective laser melting[J]. Electric Locomotives & Mass Transit Vehicles, 2018, 41 (1): 76-80(in Chinese).
[65] HAN Ch J. Study on the porous metals and their composites fabricated by selective laser melting for bone implants[D]. Wuhan: Huazhong University of Science and Technology, 2018: 38-47(in Chinese).
[66] WANG Y J, LI W H. The preparation method of variable density porous metal orthopedic implants based on topology optimization technology: CN, 107563056A[P]. 2018-01-09(in Chinese).
[67] LI N, HUANG S, ZHANG G, et al. Progress in additive manufacturing on new materials: A review[J]. Journal of Materials Science & Technology, 2019, 35(2): 242-269.
[68] ZHAO Zh, CHEN J, ZHANG Q, et al. Microstructure and mechanical properties of laser additive repaired Ti17 titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(12): 2613-2621. doi: 10.1016/S1003-6326(17)60289-9
[69] ACHARYA R, DAS S. Additive manufacturing of IN100 superalloy through scanning laser epitaxy for turbine engine hot-section component repair: Process development, modeling, microstructural characterization, and process control[J]. Metallurgical and Materials Transactions, 2015, A46(9): 3864-3875. doi: 10.1007/s11661-015-2912-6
[70] WANG H, WANG L W, WANG T, et al. Method and implementation of remanufacture and repair of aircraft engine damaged blades[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(3): 1036-1048(in Chinese).
[71] FENG H, LI J F, SUN J. Study on remanufacturing repair of damaged crank shaft journal surface by laser cladding[J]. Chinese Journal of Lasers, 2014, 41(8): 0803003(in Chinese). doi: 10.3788/CJL201441.0803003
[72] YANG Ch, L H Zh, MA H W. A 4-D printing method of nickel-titanium shape-memory alloy and its application : CN109648082A[P]. 2019-04-19(in Chinese).
[73] LI R D, YUAN T Ch, LI L B, et al. The invention relates to a special substrate for 4-D printing of a crack-free Ti-Ni shape memory alloy and a preparation method : CN109112362A[P]. 2019-01-01(in Chinese).
[74] GAO Y C, ZENG S Y, FENG Y X, et al. Review of design of programmable morphing composite structures by 4-D printing[J/OL]. Journal of Mechanical Engineering[2020-07-14]. http://kns.cnki.net/kcms/detail/11.2187.TH.20191224.1229.058.html (in Chinese).