[1] RAMLY R, KUNTJORO W, ABD-RAHMAN M K. Embedded FBG sensor in aircraft smart composite materials for structural monitoring[J]. Applied Mechanics and Materials, 2013, 393: 311-316. doi: 10.4028/www.scientific.net/AMM.393.311
[2] BAERE I, LUYCKX G, VOET E, et al. On the feasibility of optical fibre sensors for strain monitoring in thermoplastic composites under fatigue loading conditions[J]. Optics and Lasers in Engineering, 2009, 47: 403-411. doi: 10.1016/j.optlaseng.2008.01.001
[3] SIKDAR S, OSTACHOWICZ W, PAL J. Damage-induced acoustic emission source identification in an advanced sandwich composite structure[J]. Steel and Composite Structures, 2018, 202 : 860-866. doi: 10.1016/j.compstruct.2018.04.051
[4] HU N M, CHEN Ch H, HOU H L, et al. Simulation research on damage characteristics of composite laminated plates under high-speed projectile impact[J]. Weapon Material Science and Engineering, 2017, 40(30): 66-69(in Chinese).
[5] YU T Y, ZHANG Z Y, SONG Sh T, et al. Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites[J]. Composite Structures, 2019(225): 111147.
[6] KOZIOL M, FIGLUS T. Evaluation of the failure progress in the static bending of GFRP laminates reinforced with a classic plain-woven fabric and a 3D fabric, by means of the vibrations analysis[J]. Polymers & Polymer Composites, 2017, 38: 1070-1085.
[7] HO M, LAU K, AU H, et al. Structural health monitoring of an asymmetrical SMA reinforced composite using embedded FBG sensors[J]. Smart Materials & Structures, 2013, 22(12): 125015.
[8] GAO L L. Development and application of fiber grating sensor encapsulated by resin-based composite material[D]. Ji'nan: Shandong University, 2018: 27-33 (in Chinese).
[9] MONIKA P, WALDEMAR S. Analysis of the possibility of non-de- structive testing to detect defects in multi-layered composites reinforced fibers by optical IR thermography[J]. Composite Structures, 2019, 213: 204-208. doi: 10.1016/j.compstruct.2019.01.071
[10] BEHESHTIZADEH N, MOSTAFAPOUR A, ABBASI H. Effect of fiber layout on signal analyzing of carbon/glass/epoxy hybrid composite laminates flexural loading using acoustic emission measurement[J]. Journal of the International Measurement Confederation, 2019, 136: 608-614. doi: 10.1016/j.measurement.2019.01.047
[11] SUN J X. Research on composite material curing and impact damage monitoring based on bragg grating sensing[D]. Wuhan: Wuhan University of Technology, 2011: 8-20(in Chinese).
[12] KIRKBY E, OLIVEIRA R D, MICHAUD V, et al. Impact localisation with FBG for a self-healing carbon fibre composite structure[J]. Composite Structures, 2011, 94(1): 8-14. doi: 10.1016/j.compstruct.2011.07.030
[13] KOZIOL M, FIGLUS T. Evaluation of the failure progress in the static bending of GFRP laminates reinforced with a classic plain-woven fabric and a 3D fabric, by means of the vibrations analysis[J]. Polymers & Polymer Composites, 2017, 38: 1070-1085.
[14] REN T X. Research on optimal configuration of FBG sensors in damage detection of composite materials[D]. Qinhuangdao: Yanshan University, 2017: 43-51 (in Chinese).
[15] WANG Q L. Numerical value of thermal curing process of carbon fiber composite material and fiber grating monitoring[D]. Ji'nan: Shandong University, 2018: 37-44 (in Chinese).
[16] ANTONUCCI V, CUSANO A, GIORDANO M, et al. Cure-induced residual strain build-up in a thermoset resin[J]. Composites, 2006, A37(4): 592-601.
[17] GU Sh Q, LIU Y F, LI J, et al. High-speed impact performance of carbon fiber/epoxy resin composite[J], Materials Engineering, 2019, 7(8): 110-117(in Chinese).
[18] DONG B, TIAN L, PAN B. Tensile testing of carbon fiber multifilament using an advanced video extensometer assisted by dual-reflector imaging[J]. Measurement, 2019, 138: 325-331. doi: 10.1016/j.measurement.2019.02.070
[19] MICLOS S, SAVASTRU D, SAVASTRU R, et al. Transverse mechanical stress and optical birefringence induced into singlemode optical fibre embedded in a smart polymer composite material[J]. Composite Structures, 2019, 218: 15-26. doi: 10.1016/j.compstruct.2019.03.044
[20] CHOI B, KWON I. Damage mapping using strain distribution of an optical fiber embedded in a composite cylinder after low-velocity impacts[J]. Composites, 2019, B173: 107009.
[21] TIBOR C. Analysis of the applicability of optical fibers as sensors for the structural health monitoring of polymer composites: The relationship between attenuation and the deformation of the fiber Gergely Heged[J]. Sensors and Actuators, 2018, A272: 206-211.
[22] LIU T Y, MEI H Y, SUN Q, et al. Application of neural network in fault location of optical transport network[J]. China Communications, 2019, 16(10): 214-225. doi: 10.23919/JCC.2019.10.014