[1] ZHAO Y P. Design of pump rotor static deflection and radial run-out detection system[D]. Shenyang: Shenyang University of Technology, 2018: 2-19(in Chinese).
[2] SI Zh Y, YU Y J, MA W, et al. Simulation analysis of radial run-out of cylindrical roller bearings[J]. Bearing, 2019, 470(1):23-27(in Chinese).
[3] WANG Zh J, SHENG W T, XIE J Y, et al. Study on the positioning measurement of cylindrical objects based on linear laser triangulation[J/OL].(2018-09-30)[2019-03-18].http://kns.cnki.net/kcms/detail/51.1125.TN.20180930.1150.010.html(in Chinese).
[4] LIU X B, TANG J, LI M Q. Non-same frequency component of laser measurement radial run-out under turning conditions[J]. Machine Tool & Hydraulics, 2018, 46(22): 116-119(in Chinese).
[5] YU P, SHAN D R. Study on three-point measurement of radial round jump error of shaft parts[J].Machine Tool & Hydraulics, 2018, 46(7):35-37(in Chinese).
[6] LI M H, CHENG L, LI Y M, et al. Design of U-wound fiber bending loss displacement sensor[J]. Journal of Optics, 2018, 38(6):94-101(in Chinese).
[7] XING B, YU Z J, XU X N, et al. Defect monitoring based on laser doppler shift[J].China Optics, 2018, 11(6):991-1000(in Chin-ese). doi: 10.3788/co.20181106.0991
[8] JIANG S C. Development and optimization of fiber Bragg grating monitoring system and its application in slope engineering [D].Ji'nan: Shandong University, 2016: 54-68(in Chinese).
[9] ZHOU M W, REN S Y, ZHU Y Q, et al. Study on the fusion cone type broadband fiber coupler[J/OL]. (2019-03-07)[2019-03-18].http://kns.cnki.net/kcms/detail/51.1125.TN.20190307.1126.006.html (in Chinese).
[10] WANG Ch, FAN X B, TONG Sh F, et al. Coupling efficiency and influencing factors of spatial light to less mode fiber[J]. Acta Photonica Sinica, 2018, 47(12): 1206001 (in Chinese). doi: 10.3788/gzxb20184712.1206001
[11] LI J. Experimental study of non-tracking solar fiber light guiding system [D]. Nanning: Guangxi University, 2018: 25-34(in Chinese).
[12] ZHU Zh J, XUE J W, WANG Y K, et al. 1064nm single-frequency fiber laser based on MOPA structure[J/OL]. (2019-03-07)[2019-03-18].http://kns.cnki.net/kcms/detail/51.1125.TN.20190307.1128.010.html (in Chinese).
[13] ZHANG W D, LI X, BAI J H, et al. Light field generation and application of optical fiber structure[J/OL].(2018-10-07)[2019-03-13].http://kns.cnki.net/kcms/detail/31.1252.O4.2018.1007.1419.044.html (in Chinese).
[14] WANG X Y, XU G K.A novel fiber coupling structure design for space communication[J].Laser Journal, 2019, 40(2):20-23(in Chinese).
[15] DU Zh J. Research on fiber optic acousto-optic modulation vibration measurement technology [D]. Zibo: Shandong University of Technology, 2016: 7-18(in Chinese).
[16] WANG H L, LIU Ch H. Research on laser roughness measurement technology based on acousto-optic modulation[J].Piezoelectrics & Acoustooptics, 2013, 35(6):797-800(in Chinese).
[17] LIU B, CAO Ch D, YU X L, et al. Experimental experiment of laser coherent Doppler velocity measurement[J].Laser & Infrared, 2018, 48(12):1486-1490(in Chinese).
[18] LIU K, WANG H L, SUN Sh Q. Study on electron modulation laser coherent shaft vibration measurement technology[J].Laser Technology, 2018, 42(4):466-469(in Chinese).
[19] CAO M, WANG E, LI B, et al. Analysis of calibration and uncertainty of FBG displacement sensor[J]. Sensors and Microsystems, 2016, 35(4): 35-37(in Chinese).
[20] LUO L M, LI A X, LIU J. Evaluation of uncertainty in measurement results of chassis dynamometer[J].China Metrology, 2019, 44(2):113-114(in Chinese).