[1] 杨胶溪, 左铁钏, 徐文清, 等. 球墨铸铁表面激光熔覆钴基合金涂层的研究[J]. 激光技术, 2006, 30(5): 517-519.YANG J X, ZUO T Ch, XU W Q, et al. The research of laser cladding Co-base alloy coating on ductile cast iron[J]. Laser Technology, 2006, 30(5): 517-519 (in Chinese).
[2] CHANG H T, WANG C J, CHENG C P. Friction stir lap welded low carbon steel and ductile iron: Microstructure and mechanical properties[J]. Science and Technology of Welding and Joining, 2013, 18(8): 688-696. doi: 10.1179/1362171813Y.0000000150
[3] SADEGHI A, MOLOODI A, GOLESTANIPOUR M, et al. An investigation of abrasive wear and corrosion behavior of surface repair of gray cast iron by SMAW[J]. Journal of Materials Research and Technology, 2017, 6(1): 90-95. doi: 10.1016/j.jmrt.2016.09.003
[4] SEKIGUCHI S, SHIBATA F. Mechanical properties of electron beam welded spheroidal graphite cast iron and mild steel welded joints[J]. Materials Transactions, 2011, 52(11): 1920-1925.
[5] 李忠, 王涛, 刘佳, 等. 工艺参量对铝合金复合焊接接头耐蚀性的影响[J]. 激光技术, 2019, 43(2): 189-194.LI Zh, WANG T, LIU J, et al. Effect of process parameters on corrosion resistance of aluminum alloy hybrid welded joints[J]. Laser Technology, 2019, 43(2): 189-194 (in Chinese).
[6] KIM J S, KIM J W, PYO C M, et al. Bead geometry prediction model for 9% nickel laser weldment, Part 1: Global regression model vs. modified regression model[J]. Processes, 2021, 9(5): 793. doi: 10.3390/pr9050793
[7] SOMMER N, LEHTO J M, VLKERS S, et al. Laser welding of grey cast iron with spheroidal graphite-influence of process parameters on crack formation and hardness[J]. Metals-Open Access Metallurgy Journal, 2021, 11(4): 532.
[8] RONNY G, FRANCISCO S, OLGA P, et al. Comparing the structure and mechanical properties of welds on ductile cast iron (700 MPa) under different heat treatment conditions[J]. Metals-Open Access Metallurgy Journal, 2018, 8(1): 72.
[9] WANG H, SHI Y, GONG S. Numerical simulation of laser keyhole welding processes based on control volume methods[J]. Journal of Physics, 2006, D39(21): 4722.
[10] 吴东江, 柴东升, 程波, 等. 脉冲激光填丝焊接薄板熔池流动行为分析[J]. 中国科学: 物理学力学天文学, 2020, 50(3): 034208.WU D J, CHAI D Sh, CHENG B, et al. Flow characteristics of the molten pool in pulsed laser welding of thin sheet with filler wire[J]. Scientia Sinica: Physica, Mechanica & Astronomica, 2020, 50(3): 034208(in Chinese).
[11] POURANVARI M. On the weldability of grey cast iron using nickel based filler metal[J]. Materials & Design, 2010, 31(7): 3253-3258.
[12] JANICKI D, GÓRKA J, KWAS'NY W, et al. Influence of solidification conditions on the microstructure of laser-surface-melted ductile cast iron[J]. Materials, 2020, 13(5): 1174. doi: 10.3390/ma13051174
[13] JAHUN F R, BENHUA Z, YUQIU S, et al. Influence of plasma remelting conditions on quantitative graphite dissolution and modified surface characteristics in 500-12 ductile iron[J]. Materials Research Express, 2020, 7(7): 076502. doi: 10.1088/2053-1591/ab9f81
[14] 韩善果, 杨永强, 蔡得涛, 等. 光丝位置对铝合金激光填丝焊接过程的影响[J]. 激光技术, 2022, 46(4): 481-485.HAN Sh G, YANG Y Q, CAI D T, et al. Influence of the distance between laser and wire on the process of aluminum alloy welding with filler wire[J]. Laser Technology, 2022, 46(4): 481-485(in Chinese).
[15] 陈根余, 江东远, 王彬, 等. 6061铝合金超声波辅助激光焊接变形控制研究[J]. 激光技术, 2021, 45(5): 541-547.CHEN G Y, JIANG D Y, WANG B, et al. Research on deformation control of ultrasonic-assisted laser welding of 6061 aluminum alloy[J]. Laser Technology, 2021, 45(5): 541-547 (in Chinese).
[16] SHI Y, LI Y F, LIU J, et al. Investigation on the parameter optimization and performance of laser cladding a gradient composite coating by a mixed powder of Co50 and Ni/WC on 20CrMnTi low carbon alloy steel[J]. Optics & Laser Technology, 2017, 99(9): 256-270.
[17] 李永健. 球墨铸铁件激光增材再制造组织演变规律及性能控制[D]. 哈尔滨: 哈尔滨工业大学, 2019.LI Y J. Microstructure evolution and performance control of laser additive remanufacturing ductile iron component[D]. Harbin: Harbin Industrial University, 2019(in Chinese).
[18] GHAINI F M, EBRAHIMNIA M, GHOLIZADE S. Characteristics of cracks in heat affected zone of ductile cast iron in powder welding process[J]. Engineering Failure Analysis, 2011, 18(1): 47-51. doi: 10.1016/j.engfailanal.2010.08.002
[19] MARTÍNEZ A J, PASCUAL G M, SOLANO G L, et al. Mechanical and microstructural analysis in the welding of ductile cast iron by TIG procedure, with different filler materials and air cooling[J]. Revista de Metalurgia, 2021, 57(2): 1-7.
[20] LACAZE J, SERTUCHA J, LARRAÑAGA P, et al. Statistical study to determine the effect of carbon, silicon, nickel and other alloying elements on the mechanical properties of as-cast ferritic ductile irons[J]. Revista de Metalurgia, 2014, 52 (2): 1-4.