[1] WANG H M. High performance metal component manufacturing technology opens a new chapter in national defense[J]. Defence Manu-facturing Technology, 2013, 6(3):5-7(in Chinese).
[2] DUTTA B, SINGH V, NATU H, et al. Direct metal deposition[J]. Advanced Materials & Processes, 2009, 167(3):29-31.
[3] JIA Sh, FU G Y, SHI S H, et al. Laser direct forming research of irregular-section entity base on inside-laser powder feeding and robotic technology[J]. Laser Technology, 2016, 40(5):654-659(in Chinese).
[4] YANG J, CHEN J, YANG H O, et al. Experimental study on residual stress distribution of laser rapid forming process[J]. Rare Metal Materials and Engineering, 2004, 33(12):1304-1307(in Chin-ese).
[5] KONG F, KOVACEVIC R. Modeling of heat transfer and fluid flow in the laser multilayered cladding process. Metallurgical & Materials Transactions, 2010, B41(6):1310-1320.
[6] DAVIM J P, OLIVEIRA C, CARDOSO A. Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)[J]. Materials and Design, 2008, 29(2):554-557. doi: 10.1016/j.matdes.2007.01.023
[7] LIU X M, GUAN Z Z. The relationship between the process parameter of laser cladding by powder feeding method and the laser layer parameters[J]. Transactions of Metal Heat Treatment, 1998, 19(3):29-34(in Chinese).
[8] SHI L K, GAO S Y, XI M Z, et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall parts[J]. Acta Metallurgica Sinica, 2006, 42(5):454-458(in Chinese).
[9] ZHANG G Z, HU R X, CHEN J G. ANSYS 10.0 thermodynamic finite element analysis example course[M]. Beijing:China Machine Press, 2007:77-82(in Chinese).
[10] LIU Sh H, WAN P T, HU L G, et al. State-of-the-art research on the temperature field in laser welding[J]. China Mechanical Engineering, 2001, 12(4):478-481(in Chinese).
[11] TAN Zh, GUO G W. Thermal properties of engineering alloys[M]. Beijing:Metallurgical Industry Press, 1996:4-78(in Chinese).
[12] JIANG W, YAHIAOUI K, HALL F R. Finite element predictions of temperature distributions in a multipass welded piping branch junction[J]. Journal of Pressure Vessel, 2005, 127(1):7-12.
[13] GU J Q, LUO F, YAO J H. Numerical simulation of residual stress during lser cladding[J]. Laser & Optoelectronics Progress, 2010, 47(10):81-86(in Chinese).
[14] HUANG W D, LIN X, CHEN J, et al. Laser additive manufacturing[M] Xi'an:Northwestern Polytechnical University Press, 2007:250-251(in Chinese).
[15] ZHU G X, LI D C, ZHANG A F, et al. The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition[J]. Optics & Laser Technology, 2012, 44(2):349-356.