[1] XU B S. Development status and prospect of green remanufacturing engineering[J] Engineering Sciences, 2011, 13(1):4-10(in Chinese).
[2] JIANG F B, SHI Sh H, FU G Y. Numerical simulation of powder-gas flow field of inside-beam powder feeding nozzle with changing attitude[J].Laser Technology, 2015, 39(2):145-151(in Chinese).
[3] GUO H M, WANG W J, LIU J H, et al. Effect of wheel cladding on wear and damage property of wheel/rail wear and under heavy-haul condition[J].Journal of Functional Materials, 2014, 45(9):9033-9042(in Chinese).
[4] FU Y M, GAO Zh T, MA Y H, et al.Research on electromagnetic crack heat arrest and laser repaired in hot diemaetal[C]//International Conference on Advanced Technology of Design and Manufacture. New York, USA: IEEE, 2010: 338-341.
[5] YANG C X, XU B, DENG Q L.The flexible fiber laser cladding processing research[J].Electromachining & Mould, 2012(s1):38-40(in Chinese).
[6] DONG L, YANG X Ch, ZHANG H M, et al. Path generation for repairing damaged parts of free-form surfaces in laser remanufacturing[J]. Chinese Journal of Lasers, 2012, 39(7):703007(in Chinese). doi: 10.3788/CJL
[7] LI J H, ZHANG D Q, YAO F P, et al. Study on 3-D remodeling of mold broken area based on reverse engineering[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2014(9):33-38(in Chinese).
[8] LIU L F, YANG X Ch. Path planning of laser remanufacturing robot based on reverse engineering[J]. Chinese Journal of Lasers, 2011, 38(7):703008(in Chinese). doi: 10.3788/CJL
[9] YILMAZ O, NABILL G, GAO J. A repair and overhaul methodology for aeroenginecomponents[J]. Robotics and Computer-Integrated Manufacturing, 2010, 26(2):190-201. doi: 10.1016/j.rcim.2009.07.001
[10] CHENG S Y, YU G X, ZHANG X W. Surface model reconstruction methodologies in reverse engineering system[J]. Computer Integrated Manufacturing Systems, 2008, 14(10):1934-1939(in Chinese).
[11] CHENG Zh Q.Application of rapid surface modeling method[J]. Knowledge Economy, 2010(11):94(in Chinese).
[12] ZHANG Sh P. Laser cladding repair for wearing teeth in excavator[J]. Hot Working Technology, 2014, 43(14):169-170(in Chinese).
[13] LIU Sh L, ZHOU R R, ZHANG L Y. Feature line extraction from triangular mesh model[J]. Journal of Computer Aided Design & Computer Graphics, 2003, 15(4):444-448(in Chinese).
[14] MO M L. Application of reverse engineering technology on automobile panel measuring & modeling[J]. Machine Tool & Hydraulics, 2008, 36(12):49-51.
[15] TONG J W. Laser remanufacturing technology used in locomotive repair[J]. Railway Locomotive and Motor Car, 2014(10):21-27(in Chinese).
[16] WANG W B, MA Z, LI A G, et al. Damaged area positioning for remanufacturing workpiece[J]. Bulletin of Science and Technology, 2010, 26(5):652-656(in Chinese).