[1] YE L, WANG Zh X. Supporting and adjusting for collimator primary mirror with large aperture and long focal-length[J]. Optics and Precision Engineering,2000,8(5):462-465(in Chinese).
[2] LI F, RUAN P, ZHAO B Ch. Study on the surface deformation of flat reflector under gravity load[J]. Acta Photonica Sinica,2005,34(2):272-275(in Chinese).
[3] FENG Sh L, ZHANG X, WENG Zh Ch, et al. Study on support way of large aperture mirror with flat rear surface[J].Optical Technique,2004,30(6):679-681(in Chinese).
[4] DING F J, LI Y C. The stress and strain analysis ofmain reflector with uniform pressure support and support angle optimization[J]. Acta Photonica Sinica,1998,27(11):1041-1045(in Chinese).
[5] LIU M, HU Q Q. A study on support structure of the one meter primary mirror of the space solar telescope[J]. Astronomical Research and Technology-Publications of National Astronomical Observatories of China,2004,1(2):99-106(in Chinese).
[6] DING Y W, YOU Zh, LU H, et al. A thermo-optical analysis method for a space optical remote sensor optostructural system[J]. Optical Engineering, 2004,43(11):2730-2735 (in Chinese).
[7] WU Q W, YANG H B, YANG J S. Design and analysis for primary mirror and its support of spacecamera[J]. Optical Technology, 2004,30(2):153-156 (in Chinese).
[8] ZHANG W G, FENG Zh X, TAO Zh. Modal analysis and dynamicde for mation of scanning mirror[J]. Journal of Applied Optics,2006,27(1):58-61(in Chinese).
[9] YANG L W, LI Zh L, XUE D L. Analysis and test for effect of structural adhesive shrinkage during curing on mirror surface[J]. Optical Technique, 2014, 40(4):307-312(in Chinese).
[10] YODER P R. Opto-mechanical systems design[M].Beijing:China Machine Press,2008:125-127(in Chinese).
[11] LIU Q, HE X, ZHANG F, et al. Calculation and control of adhesive layer in reflector athermal mount[J]. Optics and Precision Engineering, 2012,20(10):2229-2236.