[1] MONTROSS C S, WEI T, YE L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys:a review[J]. International Journal of Fatigue, 2002, 24(10):1021-1036.
[2] LU J Z, LUO K Y, ZHANG Y K,et al. Effect of laser shock processing and strain rate on tensile property of LY2 aluminum alloy[J]. Materials Science and Engineering, 2010, A527(2):730-735.
[3] GAO Y K. Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening[J]. Materials Science and Engineering, 2011,A528(10):3823-3828.
[4] QIAN X M, JIANG Y F, GUAN H B,et al. Research and application of strengthening technology for fastening holes of aircraft structures[J]. Journal of Mechanical Strength, 2011, 33(5):749-753(in Chinese).
[5] REN X D, ZHAN Q B, YANG H M,et al. The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole[J]. Materials Design, 2013, 44(2):149-154.
[6] ZHANG L, LU J Z, ZHANG Y K,et al. Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided laser shock processing[J]. Materials Design, 2011, 32(2):480-486.
[7] JIANG Y F, DING B, CHEN Zh J, et al. Effect of laser peening area on residual stress field in small-hole specimens[J]. Laser Technology, 2014,38(2):201-204(in Chinese).
[8] LIU Q, YANG C H, DING K, et al. The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy[J]. Fatigue and Fracture of Engineering Materials and Structures, 2007, 30(11):1110-1124.
[9] JIANG Y F, ZHANG J W, JING R, et al. Analysis of the residual stress field in hole specimen by laser shock processing with different power density[J]. Laser Infrared, 2012, 42(8):866-869(in Chinese).
[10] ZOU Sh K, CAO Z W. Laser peening of aluminum alloy 7050 with fastener holes[J].Chinese Optics Letter, 2008,6(2):116-119.
[11] LUO K Y, CHEN Q, LV C, et al. Thickness analysis of two-sided simultaneous laser shock processing on AM50 alloy[J]. Chinese Journal of Lasers, 2014,41(1):0103003(in Chinese).
[12] FAN Y, WANG S B, WU H X, et al. Research of residual compressive stress induced by laser shock processing on 7050 aerial aluminum alloy[J]. Applied Laser, 2003, 23(1):6-9(in Chinese).
[13] ZHOU J Zh, YANG X D, HUANG Sh, et al. Residual stress field of ZK60 specimen with central hole induced by both-side laser shot peening[J]. Chinese Journal of Lasers, 2010,37(7):1850-1855(in Chinese).
[14] VASU A, HU Y X, GRANDHI R V. Differences in plasticity due to curvature in laser peened components[J]. Surface Coatings Technology, 2013, 235(2):648-656.
[15] ACHINTHA M, NOWELL D. Eigenstrain modelling of residual stresses generated by laser shock peening[J]. Journal of Materials Processing Technology, 2011,211(6):1091-1101.