[1] LIU J, ZHANG H, SHI Y. Technology optimizing research on laser non-penetration lap welding ofstainless steel based on design-expert V7[J]. Journal of Mechanical Engineering,2011,47(16):52-60(in Chinese).
[2] LIU J. Laser welding technology and clamping control system design for plate heat exchanger[D].Changchun:Changchun University of Science and Technology, 2013:3-8(in Chinese).
[3] SHI Y, LIU J,ZHANG H.Study on deep penetration laser welding of 20Cr2Ni4A-20g dissimilar steel by slab CO2 laser[J].Chinese Journal of Lasers,2011,38(6):0603011(in Chinese).
[4] ZHANG L J, ZHANG J X, CAO W J. Effect of welding parameters on weld geometry on pulsed Nd:YAG laser/TIG hybrid welding process of 304 stainless steel[J].Transactions of China Welding Instituion, 2011,32(1):33-36(in Chinese).
[5] WANG W, CHEN L,ZHAO X K. Effect of welding parameters on formation of welds duringlaser welding of NiTi shape memory alloy[J].Chinese Journal of Lasers, 2008,35(2):291-296(in Chinese).
[6] WU Sh K, XIAO R Sh,CHEN K.Laser welding of heavy section stainless steel plants [ J ] .Chinese Journal of Lasers,2009,36( 9):2422-2425(in Chinese).
[7] XU L, LIU X X, LI Q F, et al. Process study on laser welding of high strength galvanized steel with powder filling[J].Laser Technology,2014,38(1):1-5(in Chinese).
[8] LI J M, WANG Ch M, YAN F, et al. Study on microstructure and mechanical properties of 6005A joint in laser-MIG hybrid welding[J].Laser Technology,2014,38(6):733-737(in Chinese).
[9] YU Zh H, YAN H G, GUAN Zh G, et al. Effects of laser welding parameters on weld appearance andcracking tendency of high strength magnesium alloy[J]. Chinese Journal of Nonferrous Metals,2013(6):1479-1488(in Chinese).
[10] SHAN J G, LEI X,TAN W D, et al. Welding modes and weld formation characteristics of CO2 laser welding of wrought magnesium alloy AZ31B[J]. Transactions of China Welding Institution, 2008, 29(4): 9-12(in Chinese).
[11] XU F,YANG J,GONG Sh L, et al.Effect of heat input on weld appearance of fiber laser beam full penetration welding aluminum alloy[J]Chinese Journal of Lasers,2014,41(12):1203001(in Chin-ese).
[12] ZHONG J M, WANG Zh H, NIE D J, et al. Influence of grain size on mechanical properties of isostatically pressed beryllium materials[J]. Transactions of Nonferrous Metals Society of China, 2000, 10(2): 228-231.
[13] LI H B, JIANG Zh H, ZHANG Z R. Efefet of grain size on mechanical properties of niekel free high nitrogen austenitic stainless steel[J]. Journal of Iron and Steel Research, International, 2009, 16(1):58-61.