[1] |
REN G G, HUANG Y N. Laser-based IRCM system defenses for military and commercial aircraft [J]. Laser & Infrared,2006,36(1):1-6(in Chinese). |
[2] |
LIN H Y, HUANG X H, XU Y Ch, et al. Research and progress of middle-infrared intracavity single resonant optical parametric oscillators [J]. Laser Technology,2011,35(6):756-760(in Chinese). |
[3] |
YAO B Q, WANG Y Zh, WANG Q. Development of mid-infrared optical parametric oscillator [J].Laser Technology,2002,26(3): 217-220(in Chinese). |
[4] |
WANG L, WU X Y, LI Zh, et al. Progress of the nonlinear crystal and device of the mid-infrared optical parametric oscillator[J].Laser Technology,2011,35(4):433-439(in Chinese). |
[5] |
QIN X F, ZHOU W D. Progress of mid-infrared continuous wave optical parameter oscillator technique based on PPLN crystal[J].Laser Technology, 2013, 37(2):198-203(in Chinese). |
[6] |
ZHANG W, WAN Y, CHEN H M, et al. Experimental study on mid-infrared KTA optical parametric oscillator[J].Laser & Infrared,2011,41(7):42-46(in Chinese). |
[7] |
PETERSON R D, SCHEPLER K L. 1.9μm-fiber-pumped Cr:ZnSe laser[C]//The Optical Society of America, Advanced Solid-State Photonics. Vienna, Austria: The Optical Society of America, 2005:236-240. |
[8] |
PENG Y F, WANG W M, XIE G, et al. 3.8μm mid-infrared laser with 11.2W output power [J]. Infrared and Laser Engineering,2008,37(s1):82-85(in Chinese). |
[9] |
PENG Y F, WANG W M, LIU D, et al. High efficiency PPMgLN optical parametric oscillator infrared laser with 62W output power [J]. Chinese Journal of Lasers, 2010, 37(3):613-616(in Chinese). |
[10] |
BO X, JIAN L M, RAN Ch. High-power, high-repetition-rate mid-infrared generation with PE-SRO based on a fan-out periodically poled MgO-doped lithium niobate. [J]. Optics Communications, 2011, 28(4):1391-1394. |
[11] |
YAO J Q, XU D G. All solid state laser and nonlinear optical frequency conversion technology [M]. Beijing: Science Press,2007:732-738(in Chinese). |
[12] |
DENG H R, LI T, NIU R H, et al. Theory analysis of 2μm laser output based on PPLN [J]. Laser Technology, 2013, 37 (1): 63-67(in Chinese). |