[1] WANG R, HAO X J, ZHOU H C, et al.Design of infrared signal detection circuit in a temperature calibration system[J].Laser Technology, 2013,37(2):247-250(in Chinese).
[2] GE M Z, XIANG J Y, ZHANG Y K. Effect of laser shock processing on resistance to stress corrosion cracking of tungsten inert-gas welded AZ31B magnesium alloy [J]. Laser and Optoelectronics Progress, 2012(12):1203007(in Chinese).
[3] TANG H G, GAO M, ZENG X Y. Tensile strength and microstructure of laser welding of AZ31 magnesium alloy thick plates[J]. Laser Technology, 2011, 35(2):152-155(in Chinese).
[4] LIU S H, LIU J L, LIU H, et al. AZ91 magnesium alloy welding based on YAG pulsed laser[J]. Laser Technology, 2010, 34(4): 459-462(in Chinese).
[5] ZHAO H J, ZHANG Y H, KANG Y L. Effect of cerium on the ignition point of AZ91D magnesium alloy[J]. Light Alloy Fabrication Technology, 2008, 36(2):42-57(in Chinese).
[6] ZHANG X Y, LI Q N, ZHANG Q. Research progress of ignition proof magneium alloy with Ca[J]. Hot Working Technology, 2011, 40(16):4-6(in Chinese).
[7] QIN L, DING J, ZHAO W M, et al. Effect of Ce and Ca additions on property and structure of ignition-proof magnesium alloy[J]. Foundry, 2013, 62(5): 388-392(in Chinese).
[8] WANG P, SHINOZAKI K, YAMAMOTO M. Evaluation of solidification cracking susceptibility during laser welding by in-situ observation method[J]. Chinese Journal of Lasers, 2011, 38(6): 0603005(in Chinese).
[9] CHEN P, ZHANG M X. Measurement for the flammability point of Mg and Mg alloy[J]. Special Casting and Nonferrous Alloys, 2001(2):323-326(in Chinese).
[10] BOBRYSHEV B L. Igintion of magnesium and its alloys[J]. Metal Science and Heat Treatment, 1988, 30(3):219-222.
[11] YUAN C M, HUANG D Z, LI C, et al. Ignition behavior of magnesium powder layers on a plate heated at constant temperature[J]. Journal of Hazardous Materials, 2013, 246/247:283-290.
[12] ZHU J H, HAO X J, ZHOU H C. Implementation of the measurement method and system for transient high-temperature based on colorimetric temperature measurement[J]. Automation and Instrumentation, 2010, 25(9): 5-8(in Chinese).