| [1] | HERBERT S.Laser-welded blade is key to trenching update[J].Industrial Diamond Review,1983,43(499):293～296. |
| [2] | SCHNEIDER W.Laser welding instead of brazing[J].Industrial Diamond Review,1985,45(510):242. |
| [3] | MORIN W.Laser makes it better[J].Industrial Diamond Review,1988,48(528):206. |
| [4] | HERBERT S.Nimbus laser lights the way ahead[J].Industrial Diamond Review,1988,48(528):215～216. |
| [5] | VEGLIO O.Dialaser blades from pianezza[J].Industrial Dia-mond Review,1989,49(534):213. |
| [6] | WEBER G.Laser welding of diamond tools[J].Industrial Diamond Review,1991,51(544):126～128. |
| [7] | CLAUSER G,VALLE A.Laser welding explained[J].Industrial Diamond Review,1987,47(522):207～208. |
| [8] | SMITH A.Dry-cutting saws allow pile cutting in cold weather[J].Concrete Construction,1989,34(7):653～654. |
| [9] | UGUES D,GRANDE M A,ROSSO M.Cutting diamond tools:opti-mised laser welding procedures to bond the segments to the steel core[A].Proceedings of the 3rd International Powder Metallurgy Conference[C].Ankara:Turkish Powder Metallurgy Association,2002.507～516. |
| [10] | TANG X H.Laser welding of diamond tools[M].Wuhan:Huazhong University of Science and Technology Press,2004.4～9,101,160,167,184(in Chinese). |
| [11] | YAO J H,CHEN L.Study of laser welding technology on diamond circular saw blade[J].Chinese Journal of Lasers,2000,27(8):761～764(in Chinese). |
| [12] | JIANG R Ch.Selection and research of backing powder composition for laser welding saw blade[J].Jewlry Science and Technology,2003,15(1):8～12(in Chinese). |
| [13] | GUO Zh M,SONG Y Q,CHEN H X et al.Superhard materials and tools[M].Beijing:Metallurgical Industry Press,1996.73～74(in Chinese). |
| [14] | SUN Y Ch,LIU Y B,WANG Q Sh.Metallurgical base of diamond tools[M].Beijing:Chinese Construction Industry Press,1999.78～93(in Chinese). |
| [15] | ZHU H H,TANG X H,ZHU G F.Research of welded seam strength of laser welded diamond saw[J].Laser Technology,1998,22(5):273～276(in Chinese). |
| [16] | YIN J H,YIN Sh,YE H Y et al.Laser welding process of diamond saw blade[J].Powder Metallurgical Technology,1999,17(4):248～252(in Chinese). |
| [17] | LI L B,TANG X H,QIN Y X et al.Developing status of pre-alloyed backing powder used in laser welded diamond tools[J].Diamond and Abrasive Engineering,2005(2):56～60(in Chinese). |
| [18] | HUANG Q Ch,LIAO J H,LIU S H et al.Laser welding of diamond saw blade[J].Laser Journal,2004,25(2):19～20(in Chinese). |
| [19] | JIN X Zh,LI L J.Application of laser welding in the diamond circular saw blade[J].Mechanical Technologist,1999(6):9～10(in Chinese). |
| [20] | PANG Zh H,YANG H N,PAN R J.Research of laser welding circular saw blade[J].Diamond and Abrasive Engineering,2002(2):17～18(in Chinese). |
| [21] | ZHU H H,TANG X H,ZHU G F et al.Study of equipment and technology of laser welding for diamond saw blade[J].Laser Technology,2000,24(3):141～144(in Chinese). |
| [22] | PARK J W,LEE C H,CHUNG N H.Weldability of CoNi sintered alloys and carbon steel[J].Diamond and Abrasive Engineering,2000(5):13～18(in Chinese). |
| [23] | CAI F H,TANG X H,QIN Y X et al.The research trends of the prealloyed powder used in diamond tools[J].Diamond and Abrasive Engineering,2004(5):77～80(in Chinese). |
| [24] | SHI X Q,LI L J.Experimental study of technological parameters laser welding on the diamond tools[J].Chinese Journal of Lasers,1999,26(4):379～383(in Chinese). |
| [25] | BARATTA A,MARLOTH,R T,ES-SAID O S et al.Strengthening laser welds in diamond cutting tools[A].Microstructural Science:Proceedings of the 31st Annual Technical Meeting of the International Metallographic Society[C].New York:ASM,1998,26:171～176. |
| [26] | XIA J H,YIN Sh,YE H Y et al.Effect of beam alignment on laser welding quality of diamond saw blade[J].Laser Technology,1999,23(4):248～251(in Chinese). |
| [27] | XIA J H,YIN Sh,YE H Y et al.Analysis of defects and fracture surfaces of laser welding diamond saw blade[J].Journal of Synthetic Crystals,1999,28(1):79～83(in Chinese). |
| [28] | XIA J H,YIN Sh,YE H Y et al.Composition,microstructure and properties of welded joint of diamond saw blade by laser welding[J].The Chinese Journal of Nonferrous Metals,1999,9(suppl.1):209～213(in Chinese). |
| [29] | TANG X H,ZHOU J X,REN J H et al.New theory and method for testing laser welding strength of diamond tools[J].Diamond and Abrasive Engineering,2004(1):24～26(in Chinese). |
| [30] | CROSTACK H A,MAASS M.Non-destructive evaluation of seams of laser welded tools using the CS-eddy current technique[A].Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society[C].New York:IEEE,1998.2279～2283. |
| [31] | CRUCIANI D,LINGUITI F.Laser welding dissimilar metals as alternative to brazing:experimental results,economical and quality evaluations,applications in production line[J].Proc SPIE,1990,1276:243～246. |
| [32] | ZHUANG Q R,ZHANG W Zh,CHEN W Zh et al.Feedback control of laser welding diamond saw by acoustic signals[J].Laser Technology,2001,25(3):170～173(in Chinese). |
| [33] | WANG Zh G.Non-damage measurement of laser weld diamond circular saw blade[J].Diamond and Abrasive Engineering,2001(6):19～20(in Chinese). |
| [34] | HE Y Y,TANG X H,ZHU G F et al.Research of laser welding saw blade for concrete cutting[J].Diamond and Abrasive Engineering,2002(3):35～37(in Chinese). |
| [35] | HE Y Y,TANG X H,ZHU G F et al.Research of laser-welded sharp small saw blade[J].Diamond and Abrasive Engineering,2002(4):25～26(in Chinese). |