[1] |
INNOCENZI M E,YURA H T,FINCHER C L et al.Thermal modeling of continuous-wave end-pumped solid-state lasers[J].A P L,1990,56 (19):1831~1833. |
[2] |
COUSINS A K.Temperature and thermal stress scaling in finite-length end-pumped laser rods[J].IEEE J Q E,1992,28 (4):1057~1069. |
[3] |
OZYGUS B,ERLLARD J.Thermal lens determination of end-pumped solid-state lasers with transverse beat frequencies[J].A P L,1995,67(10):1361~1362. |
[4] |
CHEN Y F,HUANG M,KAO C F et al.Optimization in scaling fiber-coupled laser-diode end-pumped lasers to higher power:influence of thermal effect[J].IEEE J Q E,1997,33 (8):1424~1429. |
[5] |
XIE W,TAM S,LAM Y et al.Thermal and optical properties of diode side-pumped solid state laser rods[J].Opt Laser Technol,2000,32 (3):193~198. |
[6] |
XIE W,TAM S,LAM Y et al.Influence of the thermal effect on the TEM00mode output power of a laser-diode side-pumped solid-state laser[J].Appl Opt,2000,39 (30):5482~5487. |
[7] |
FLUCK R,HERMANN M R,HACKEL L A.Energetic and thermal performance of high gain diode-side pumped Nd:YAG rods[J].Appl Phys,2000,B70(4):491~498. |
[8] |
GONG M L,LI Ch,LIU Q et al.Corner pumping method for slab geometry lasers and solid-state lasing gain modules[P].China Patent:02129485.2,2002-08-23(in Chinese). |
[9] |
GONG M L,LI Ch,LIU Q et al.Corner pumping method for solid-state lasing materials operated at low absorption coefficient[P].US Patent:10/719072,2003-06-27. |
[10] |
GONG M L,LI Ch,LIU Q et al.200W corner-pumped Yb:YAG slab laser[J].Appl Phys,2004,B79(3):265~267. |
[11] |
RUTHERFORD T S,TULLOCH W M,GUSTAFSON E K et al.Edge-pumped quasi-three-level slab lasers:design and power scaling[J].IEEE J Q E,2000,36(2):205~219. |
[12] |
YANG Sh M.Heat transfer[M].Beijing:High Education Press,1997.31(in Chinese). |
[13] |
EGGLESTON J M,KANE T J,KUHN K et al.The slab geometry laser-part 1.Theory[J].IEEE J Q E,1984,20 (3):289~301. |