[1] JIANG W,XU Zh X,DALGARNO K W etal.Numerical prediction of thermal stresses in direct metal SLS process [A].Proceeding of the Second International Conference on Rapid Prototyping & Manufacturing 2002 [C].Beijing:Tsinghua University Press,2002.64～69.
[2] CHILDS T H C,TONTOWI A E.Selective laser sintering of a crystalline and a glass-filled crystalline polymer:experiments and simulations [J].Proc MechE,2001,B215:1481～1495.
[3] GRECO A,MAFFEZZOLI A.Polymer melting and polymer powder sintering by thermal analysis [J].Journal of Thermal Analysis and Calorimetry,2003,72(3):1167～1174.
[4] CHILDS T H C,BERZINS M,RYDER G Retal.Selective laser sintering of an amorphous polymers-simulations and experiments [J].Proc IMechE,1999,B213:333～349.
[5] FISHCHER P,ROMANO V,WEBER H P et al.Modeling of near infrared pulsed laser sintering of metallic powders [J].SPIE,2003,5147:292～298.
[6] MATSUMOTO M,SHIOMI M,OSAKADA K et al.Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing [J].International Journal of Machine Tools & Manufacture,2002,42(1):61～67.
[7] WILLIAMS J D,DECKARD R.Advances in modeling the effects of selected parameters on the SLS process [J].Rapid Prototyping Journal,1998,4(2):90～100.
[8] SIH S S,BARLOW J W.Measurement and prediction of the thermal conductivity of powders at high temperature [A].Proceedings of the 5th Annual SFF Symposium [C].Austin:the University of Texas,1994.321～329.
[9] SIH S S,BARLOW J W.The prediction of the thermal conductivity of powders [A].Proceedings of the 6th Annual SFF Symposium [C].Ausfin:the University of Texas,1995.397～401.
[10] 鹿安理,史青宇,赵海燕 et al.厚板焊接过程温度场、应力场的三维有限元数值模拟[J].中国机械工程,2001,12(2):183～186.