[1] 王佳敏, 季艳慧, 梁志勇, 等. 532 nm皮秒脉冲激光对单晶硅的损伤特性研究[J]. 中国光学, 2022, 15(2): 242-250.WANG J M, JI Y H, LIANG Zh Y, et al. Damage characteristics of a 532 nm picosecond pulse laser on monocrystalline silicon[J]. Chin-ese Optics, 2022, 15(2): 242-250(in Chinese).
[2] 聂世琳, 管迎春. 紫外激光器及其在微加工中的应用[J]. 光电工程, 2017, 44(12): 1169 -1179.NIE Sh L, GUAN Y Ch. Review of UV laser and its applications in micromachining[J]. Opto-Electronic Engineering, 2017, 44(12): 1169-1179(in Chinese).
[3] 卢红. 不同环境下激光与材料的相互作用[D]. 天津: 天津大学, 2017: 10-17.LU H. Interaction between laser and materials under different environmental conditions[D]. Tianjin: Tianjin University, 2017: 10-17 (in Chinese).
[4] 张晋平. 飞秒激光加工高深径比微孔的研究[D]. 上海: 上海交通大学, 2015: 20-26.ZHANG J P. Research of high-aspect ratio holes drilled by femtose-cond laser[D]. Shanghai: Shanghai Jiao Tong University, 2015: 20-26(in Chinese).
[5] UENO I, SHOJI M. Thermal-fluid phenomena induced by nanosecond-pulse heating of materials in water[J]. Journal of Heat Transfer, 2001, 123(6): 1123-1132. doi: 10.1115/1.1409264
[6] 周翔, 段军, 陈航, 等. 水辅助激光无重铸层钻孔Al2O3陶瓷实验研究[J]. 激光技术, 2018, 42(2): 271-275.ZHOU X, DUAN J, CHEN H, et al. Experimental study about water-assisted laser drill on Al2O3 ceramics without recast layer[J]. Laser Technology, 2018, 42(2): 271-275(in Chinese).
[7] 朱帅杰, 张朝阳, 储松林, 等. 海量微孔水辅助法皮秒激光加工技术的研究及应用[J]. 中国激光, 2020, 47(3): 03020028.ZHU Sh J, ZHANG Ch Y, CHU S L, et al. Research and application of massive micropores water-assisted picosecond laser processing technology[J]. Chinese Journal of Lasers, 2020, 47(3): 03020028 (in Chinese).
[8] DOU H Q, YAO C Z, LIU H, et al. Femtosecond laser ablation of Al-Mg alloy in vacuum and air[J]. Applied Surface Science, 2018, 447(31): 388-392.
[9] WANG Q W, YE Y C, PENG Y, et al. Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser[J]. Tribology International, 2020, 154: 106720.
[10] 王卫江, 贾凯, 房瑞娜, 等. 激光诱导等离子体辐射特性的研究综述[J]. 激光技术, 2022, 46(4): 499-510.WANG W J, JIA K, FANG R N, et al. Review on radiation features of laser-induced plasma[J]. Laser Technology, 2022, 46(4): 499-510(in Chinese).
[11] WANG X, QIN Y, WANG B, et al. Numerical and experimental study of the thermal stress of silicon induced by a millisecond laser[J]. Applied Optics, 2011, 50 (21) : 3725-3732. doi: 10.1364/AO.50.003725
[12] 张廷忠. 毫秒激光打孔过程熔融喷溅、重铸层和微裂纹形成机理研究[D]. 南京: 南京理工大学, 2017: 31-33.ZHANG T Zh. Study on the mechanism of melt ejection recast, layer and micro crack formation in millisecond laser drilling[D]. Nanjing: Nanjing University of Science and Technology, 2017: 31-33(in Chinese).
[13] 钟发成, 吕雪明, 李佳桂, 等. 组合激光对单晶硅热作用的数值分析[J]. 激光技术, 2017, 41(5): 637-643.ZHONG F Ch, LV X M, LI J G, et al. Numerical analysis of thermal effect of the combined laser on single crystal silicon polymers irradiated by high power laser[J]. Laser Technology, 2017, 41(5): 637-643(in Chinese).
[14] 齐立涛, 李雪, 刘亚升. 单脉冲266 nm固体激光烧蚀蓝宝石的工艺和机理[J]. 黑龙江科技大学学报, 2020, 30(4): 416-421.QI L T, LI X, LIU Y Sh. Process and mechanism for sapphire ablation by singlepulse 266 nm solid-state laser[J]. Journal of Heilongjiang University of Science and Technology, 2020, 30(4): 416-421 (in Chinese).
[15] 曹州权, 谢小柱, 陈蔚芳, 等. 液体辅助激光加工过程中压力检测及应用研究进展[J]. 光电工程, 2017, 44(4): 381-392.CAO Zh Q, XIE X Zh, CHEN W F, et al. Research progress of pressure detection and applications in liquid-assisted laser machining[J]. Opto-Electronic Engineer, 2017, 44(4): 381-392(in Chin-ese).
[16] 齐立涛, 刘凤聪. 266 nm纳秒固体激光在CH薄膜上打孔的工艺实验研究[J]. 激光技术, 2022, 46(6): 767-772.QI L T, LIU F C. Experimental investigation on 266nm nanosecond solid-state laser drilling on CH film[J]. Laser Technology, 2022, 46(6): 767-772(in Chinese).
[17] 鲍家定. 水层特性对水下激光划切单晶硅质量的影响研究[D]. 桂林: 桂林电子科技大学, 2021: 28-34.BAO J D. Study on the influence of water layer characteristics on quality of under water laser cutting monocrystalline silicon[D]. Gui-lin: Guilin University of Electronic Technology, 2021: 28-34(in Ch-inese).
[18] 彭根琛. 铝合金真空激光焊接特性及能量传输机理研究[D]. 哈尔滨: 哈尔滨工业大学, 2020: 20-25.PENG G Ch. Research on characteristics and energy transfer mechanism of laser welding under vacuum for aluminum alloys[D]. Harbin: Harbin Institute of Technology, 2020: 20-25 (in Chinese).
[19] 张潇允, 张巍, 夏盛强, 等. 高功率激光辐照CFRP的温度场和应力场的数值分析[J]. 激光技术, 2021, 45(5): 636-641.ZHANG X Y, ZHANG W, XIA Sh Q, et al. Study on numerical analysis of temperature field and stress field of carbon fiber reinforced polymers irradiated by high power laser[J]. Laser Technology, 2021, 45(5): 636-641(in Chinese).
[20] LI G L, SHI D, H H S, et al. Research on the mechanism of laser drilling alumina ceramics in shallow water[J]. The International Journal of Advanced Manufacturing Technology, 2022, 118(11): 3631-3639.