[1] 梁飞龙, 师文庆, 李凯玥, 等. Cu质量分数对激光熔覆Ni-Cu-WC涂层组织和性能的影响[J]. 激光技术, 2023, 47(5): 653-658. doi: 10.7510/jgjs.issn.1001-3806.2023.05.012LIANG F L, SHI W Q, LI K Y, et al. Effect of Cu mass fraction on microstructure and properties of laser cladding Ni-Cu-WC coatings[J]. Laser Technology, 2023, 47(5): 653-658(in Chinese). doi: 10.7510/jgjs.issn.1001-3806.2023.05.012
[2] 高铭余, 谢宏斌, 方攸同, 等. 铜及铜合金表面处理进展[J]. 中国有色金属学报, 2021, 31(5): 1121-1133.GAO M Y, XIE H B, FANG Y T, et al. Progress in surface treatment techniques of copper and copper alloys[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(5): 1121-1133(in Chinese).
[3] 杨杰, 贺春林, 孙宇海漩, 等. 铜合金表面激光熔覆技术的研究现状[J]. 材料保护, 2022, 55(11): 133-141.YANG J, HE Ch L, SUN Y H X, et al. Research status of laser cladding technology on the surface of copper alloy[J]. Materials Protection, 2022, 55(11): 133-141(in Chinese).
[4] 魏瑛康, 刘瑶珊, 王岩, 等. 不锈钢表面激光熔覆强化层研究现状与展望[J]. 中国冶金, 2022, 32(11): 6-17.WEI Y K, LIU Y Sh, WANG Y, et al. Research status and prospect of laser cladding strengthening layer on stainless steel surface[J]. China Metallurgy, 2022, 32(11): 6-17(in Chinese).
[5] 钟强, 钱炯, 吴静娜, 等. 表面处理对海洋工程用316L不锈钢耐点蚀性能的影响[J]. 中国冶金, 2022, 32(6): 129-133.ZHONG Q, QIAN J, WU J N, et al. Effect of surface treatment on pitting resistance of 316L stainless steel for offshore engineering[J]. China Metallurgy, 2019, 32(6): 129-133(in Chinese).
[6] MAHMOUD E R I, KHAN S Z, EJAZ M. Laser surface cladding of mild steel with 316L stainless steel for anti-corrosion applications[J]. Materials Today: Proceedings, 2021, 39: 1029-1033. doi: 10.1016/j.matpr.2020.04.763
[7] LIU Y N, YANG L J, YANG X J, et al. Optimization of microstructure and properties of composite coatings by laser cladding on titanium alloy[J]. Ceramics International, 2021, 47(2): 2230-2243. doi: 10.1016/j.ceramint.2020.09.063
[8] CHEN S Y, LIANG J, LIU C S, et al. Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser[J]. Applied Surface Science, 2011, 258(4): 1443-1450. doi: 10.1016/j.apsusc.2011.09.101
[9] NG K W, MAN H C, CHENG F T, et al. Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts[J]. Applied Surface Science, 2007, 253(14): 6236-6241. doi: 10.1016/j.apsusc.2007.01.086
[10] 蔡彧斐, 郑荣部, 江洋, 等. 铜合金表面激光熔覆Ni/WC增强Co基涂层组织研究[J]. 热加工工艺, 2015, 44(20): 135-137.CAI Y F, ZHENG R B, JIANG Y, et al. Microstructure and wear properties of laser cladding Ni/WC reinforced co-based coating on copper alloy surface[J]. Hot Working Technology, 2015, 44(20): 135-137(in Chinese).
[11] RAHM E, KUNZMANN D, DÖRING H, et al. Corrosion-stable nickel and cobalt-based alloys for dental applications[J]. Microchimica Acta, 2006, 156: 141-145. doi: 10.1007/s00604-006-0601-2
[12] CHEN C, WU M P. Investigation of the friction and corro-sion behavior of laser-clad cobalt-based coatings in sea water[J]. Metal Science and Heat Treatment, 2021, 63(7): 444-448.
[13] JITHESH K, ARIVARASU M. Comparative studies on the hot corrosion behavior of air plasma spray and high velocity oxygen fuel coated Co-based L605 superalloys in a gas turbine environment[J]. International Journal of Minerals Metallurgy and Materials, 2020, 27(5): 649-659. doi: 10.1007/s12613-019-1943-1
[14] 王艾竹, 王志刚, 李宁, 等. 一种高碳耐磨高温合金的组织和性能[J]. 金属功能材料, 2021, 28(6): 110-114.WANG A Zh, WANG Zh G, LI N, et al. Microstructure and pro-perties of a high carbon wear-resistant superalloy[J]. Metal Functional Materials, 2021, 28(6): 110-114(in Chinese).
[15] 路超, 肖梦智, 屈岳波, 等. 射频等离子球化制备球形钴铬合金粉末工艺研究[J]. 粉末冶金工业, 2020, 30(6): 8-14.LU Ch, XIAO M Zh, QU Y B, et al. Research of parameters on the effect of CoCr alloys pherical powders produced by RF plasma[J]. Powder Metallurgy Industry, 2020, 30(6): 8-14 (in Chinese).
[16] 杨志威, 梁甫, 刘一波. 陶瓷切割低钴金刚石圆锯片配方开发[J]. 粉末冶金工业, 2022, 32(3): 117-121.YANG Zh W, LIANG F, LIU Y B, et al. Cutting tiles diamond circle blade bond study of replacing Co to reduce cost[J]. Powder Metallurgy Industry, 2022, 32(3): 117-121 (in Chinese).
[17] 汪轩义, 吴荫顺, 张琳, 等. 316L不锈钢钝化膜在Cl-介质中的耐蚀机制[J]. 腐蚀科学与防护技术, 2000, 12(6): 311-314. doi: 10.3969/j.issn.1002-6495.2000.06.001WANG X Y, WU Y Sh, ZHANG L, et al. Corrosion behavior in 3.5%NaCl solution of 316L SS passinated in anoxidizing acid liquor[J]. Corrosion Science and Protection Technology, 2000, 12(6): 311-314(in Chinese). doi: 10.3969/j.issn.1002-6495.2000.06.001
[18] 史艳华, 于洋, 梁平, 等. 316L不锈钢在氯离子环境中的腐蚀行为[J]. 材料保护, 2015, 48(8): 29-32.SHI Y H, YU Y, LIANG P, et al. Corrosion behavior of 316L austenitic stainless steel in solutions containing chloride ions[J]. Materials Protection, 2015, 48(8): 29-32(in Chinese).
[19] 韩亚军, 陈友媛. 316L不锈钢在不同电导率海水和NaCl溶液中的电化学腐蚀行为[J]. 材料导报, 2012, 26(20): 57-60. doi: 10.3969/j.issn.1005-023X.2012.20.015HAN Y J, CHEN Y Y. Electrochemistry corrosion behaviors of 316L stainless steel in different electric conductivity seawaters and NaCl solutions[J]. Materials Reports, 2012, 26(20): 57-60(in Chinese). doi: 10.3969/j.issn.1005-023X.2012.20.015
[20] 薛亚军. Ni-Cu-P镀层和316L不锈钢在热盐酸溶液中的耐蚀性及机制[J]. 金属热处理, 2013, 38(6): 114-117.XUE Y J. Corrosion resistance and its mechanism of Ni-Cu-P coating and 316L stainless steel in hot hydrochloric acid solution[J]. Heat Treatment of Metals, 2013, 38(6): 114-117(in Chinese).
[21] 张彦超, 韦朋余, 朱强, 等. 316L不锈钢表面激光熔覆Stellite6合金组织及其耐液态铅铋腐蚀性能[J]. 材料导报, 2021, 35(8): 8121-8126.ZHANG Y Ch, WEI P Y, ZHU Q, et al. Microstructure and Pb-Bi erosion resistance property of Stellite6 coating by laser cladding on 316L stainless steel surface[J]. Materials Reports, 2021, 35(8): 8121-8126(in Chinese).
[22] CHEN S Y, LIANG J, LIU C S, et al. Preparation of a novel Ni/Co-based alloy gradient coating on surface of the crystallizer copper alloy by laser[J]. Applied Surface Science, 2011, 258(4): 1443-1450. doi: 10.1016/j.apsusc.2011.09.101
[23] 徐建林, 杨波, 高威, 等. 铝青铜表面激光熔覆层组织与性能研究[J]. 航空材料学报, 2009, 29(1): 63-67.XU J L, YANG B, GAO W, et al. Microstructure and performance of laser cladding on surface of aluminum bronze[J]. Journal of Aeronautical Materials, 2009, 29(1): 63-67(in Chinese).
[24] PARTES K, SEPOLD G. Modulation of power density distribution in time and space for high speed laser cladding[J]. Journal of Materials Processing Technology, 2008, 195(1/3): 27-33.
[25] ZHANG M M, LIU B, BAI P K. Microstructure and properties ofc laser cladding of 316L strainless steel on hydraulic support tube[J]. Journal of Measurement Science and Instrumentation, 2017, 8(2): 154-161.
[26] 刘发兰, 赵树森, 高文焱, 等. 基材属性对Ni60A-WC激光熔覆涂层性能的影响[J]. 中国有色金属学报, 2014, 24(5): 1319-1326.LIU F L, ZHAO Sh S, GAO W Y, et al. Effect of substrate on Ni60A-WC laser cladding coatings[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(5): 1319-1326(in Chinese).
[27] 徐泽洲, 王志英, 何志军, 等. 激光功率对激光熔覆CeO2改性316L涂层组织与性能的影响[J]. 稀有金属, 2020, 44(3): 281-286.XU Z Zh, WANG Zh Y, HE Zh J, et al. Effect of laser power on microstructure and properties of laser cladding CeO2modified 316L coating[J]. Rare Metals, 2020, 44(3): 281-286(in Chinese).
[28] 谢瑞祥, 刘宗德, 马荷蓉, 等. 铝合金表面激光熔覆铜镍合金涂层的组织、硬度与耐蚀特性研究[J]. 材料科学与工程, 2023, 31(6): 78-86.XIE R X, LIU Z D, MA H R, et al. Microstructure, hardness and corrision resistance of laser cladding copper-nickel alloy coating on aluminum alloy[J]. Materials Science and Technology, 2023, 31(6): 78-86(in Chinese).