[1] |
ZHANG X F, LU X H. Interior ballistics of erosion guns[M]. Beijing: National Defence Industrial Press,2001:6-8(in Chinese). |
[2] |
GAO F Sh. The study of barrel erssion and life span-numerical simulation of the gas flow and heat transfer. Nanjing: Nanjing University of Technology,1994:5-9(in Chinese). |
[3] |
SOPOKA S, RICKARDA C, DUNNB S. Thermal-chemical-mechanical gun bore erosion of an advanced artillery system part two: modeling and predictions[J]. Wear,2005,258(1/4): 671-683. |
[4] |
SOPOKA S, RICKARDA C, DUNNB S. Thermal-chemical-mechanical gun bore erosion of an advanced artillery system part one: theories and mechanisms[J]. Wear,2005,258(1/4):659-670. |
[5] |
UNDERWOOD J H, TROIANO E. Critical fracture processes in army cannons: a review[J].Journal of Pressure Vessel Technology,2003,125(3):299-304. |
[6] |
UNDERWOOD J H,PARKER A P,VIGILANTE G N, et al. Thermal damage, cracking and rapid erosion of cannon bore coatings[J]. Journal of Pressure Vessel Technology, 2003,125(3):299-304. |
[7] |
UNDERWOOD J H, WITHERELL M D, SOPOK S, et al. Thermomechanical modeling of transient thermal damage in cannon bore materials[J]. Wear,2004,257(9/10):992-998. |
[8] |
CHEN G N, WU X L, LUO G X, et al. The method and equipment for inner surface of table workpiece strengthened by laser: China,ZL99 1 167287.1999-03-18(in Chinese). |
[9] |
CHEN G N, LUO G X, ZHANG K, et al. A new method for improving service life of chrome-plated gun barrels by laser strengthening[J]. Acta Armamentarii,2003,24(s1):6-10(in Chinese). |
[10] |
ZHANG G X. Effect of a laser quenched substrate on the surface morphology of Cr-plating coatings[J].Laser Technology, 2011,35(6):752-755(in Chinese). |
[11] |
ZHANG G X,CHEN G N, ZHANG K, et al. The mechanical mechanism study on the prolonging life of chromium-plated gun bore through the substrate pretreated periodically by laser[J].Acta Armamentarii,2006,27(6): 978-983(in Chinese). |
[12] |
TURLEY D M. Erosion of a chromium-plated tank gun barrel[J].Wear,1989,131(1):135-150. |
[13] |
COTE P J, RICKARD C. Gas-metal reaction products in the erosion of chromium-plated gun bores[J]. Wear,2000,241(1):17-25. |