[1] |
SOPOK S,RICKARD C,DUNN S.Thermal-chemica-mechanical gun bore erosion of an advanced artillery system part one:theories and mechanisms[J].Wear,2005,258(1/4):659-670. |
[2] |
SOPOK S,RICKARD C,DUNN S.Thermal-chemical-mechanical gun bore erosion of an advanced artillery system part two:modeling and predictions[J].Wear,2005,258(1/4):671-682. |
[3] |
CHEN G N,LUO G X,ZHANG K,et al.A new method for improving service life of chrome-plated gun barrels by laser strengthening[J].Acta Armamentaria,2003,24 (s1):6-10( in Chinese). |
[4] |
ZHANG G X,CHEN G N,ZHANG K.Effect of mismatch of yielding strength and residual stresses along substrate interface on interfacial crack propagation[J].Journal of Jilin University(Engineering and Technology Edition),2006,36(3):294-297(in Chinese). |
[5] |
ZHANG G X,ZHANG K.The effect of laser hardened basal body on spread path of main cracks in chromium layer[J].New Technology & New Process,2006(9):10-12(in Chinese). |
[6] |
XU X Y,ZHANG K,CHEN G N,et al.Influence of laser hardening substrate on microstructure and bonding of electroplating chromium coating[J].Chinese Journal of Lasers,2006,33(3):413-416(in Chinese). |
[7] |
LI H X,CHEN G N,ZHANG G X,et al.Characteristics of the interface of a laser-quenched steel substrate and chromium electroplate[J].Surface & Coatings Technology,2006,201(3/4):902-907. |
[8] |
ZHANG G X,LI H X,CHEN G N.The study of the micro-crack morphologies on the initial electroplated chromium layer by substrate-chemically etching method[J].China Surface Engineering,2006,19(4):8-12(in Chinese). |
[9] |
PINA J,DIDS A,FRANCOIS M,et al.Residual stresses and crystallographic texture in hard-chromium electroplated coatings[J].Surface and Coatings Technology,1997,96(2/3):148-162. |
[10] |
HUANG Z X,WU Ch S.The plating theroy[M].Beijing:Chinese Agricultural Machinery Press,1982:76,26-43( in Chinese). |
[11] |
WU G,SONG G M,HUANG W J.Influence of laser processing parameters on the case-depth and the hardness[J].Laser Technology,2007,31(2):163- 165(in Chinese). |