[1] |
ZHANG J,CHANG T Q.Fundaments of the target physics for laser fusion[M].Beijing:National Defenae Industry Press,2004:116-250(in Chinese). |
[2] |
TAKABE H,NAGATOMO H,SUNAHARA A,et al.Target design for ignition and high gain in direct dnve ICF[J].Fusion Engineering and Design,1999,44(1/4):105-110. |
[3] |
LINDL J D,AMENDT P,RICHARD L,et al.The physics basis for ignition using indirect-drive targets on the National Ignition Facility[J].Physics of Plasmas,2003,11 (2):3933-4023. |
[4] |
IEI J H,DUAN H,XIN P F,et al.Design of soft X-ray multilayer for fanuliar spacing layer material[J].Laser Technology,2011,35(3):415-417 (in Chinese). |
[5] |
GIORLA J,BASTIAN J,BAYER C,et al.Target design for ignition experiments on the laser m agajoule facility[J].Plasma Physica and Controlled Fusiort,2006,48(12):B75-B82. |
[6] |
CARSTENS D H W,FARNUM E H,FRIES R J,et al.Fabrication of LiD0.5T0.5 Microspheres for use as laser fusion targets[J].Journal of Nuclear Material,1975,57 (1):1-10. |
[7] |
SCHULTZ K R,KAAE J L,MILLER W J,et al.Status of inertial fusion target fabrication in the USA[J].Fusion Engineering and Design,1999,44(1/4):441-448. |
[8] |
WANG X Ch.Pteparation and characterization of LiNbO3 thin films on silicon substrate by pulsed laser deposition[D].Hangzhou:Materials Physics Chemistry of Zhejiang University,2005:45-46 (in Chinese). |
[9] |
WU L,SOLOVYOV S V,WIESMANH J N,et al.Twin boundaries and crtical current densities of YBa2CU3O7 thick films fabricated by the BaF2process[J].Superconductor Science and Technology,2003,16(10):1127-1133. |
[10] |
NAKATA Y,GUNJI S,OKADA T,et al.Fabrication of LiNbO3 thin films by pulsed laser deposition and investigation of nonlinear properties[J].Applied Physics,2004,A79(4/6):1279-1282. |
[11] |
LIU D Sh,ZHONG Sh Y,DU Y L,et al.Study of LiCoO2 thin film grown under different oxygen pressure by pulsed laser deposition[J].Journal of Synthetic Crystals,2008,37(2):500-503 (in Chinese). |
[12] |
VOEVODIN A A,DONLEY M S.Pteparation of amorphous diamond-like carbon by pulsed laser deposition:a critical review[J].Surface and Coatings Technology,1996,82(3):199-213. |
[13] |
BONELLI M,FERRAIU A C,FIORABANTI A,et al.Structure and mechanical properties of low stress tetrahedral amorphous carbon films prepared by pulses laser deposition[J].The European Physical Journal,2002,B25(2):269-280. |