[1] |
ZHANG H J,ZHONG M L,LIU W J,et al.Develop of high convergent coaxial feeding nozzle with temperature display for laser rapid manufacturing[J].Applied Laser,2004,24(6):380-382(in Chinese). |
[2] |
LI X W,ZHANG Ch H,ZHANG S,et al.Developments of laser cladding technology[J].Heat Treatment Technology and Equipment,2007,28(2):1-2(in Chinese). |
[3] |
HU Y P,CHEN C W,MUKHERJEE K.Measurement of temperature distributions during laser cladding process [J].Journal of Laser Applications,2000,12(3):126-130. |
[4] |
ZOU D N,HUANG Y L,LIANG G Y,et al.Numerical simulation and experimental verification of laser cladding and reaction TiC_P/Al composite material[J].Rare Metal Materials and Engineering,2003,32(8):95-97(in Chinese). |
[5] |
PILOT M.Residual stress induced by laser coatings:phenomenological analysis and predictions [J].Material Science,1992,27(5):1240-1244. |
[6] |
JIANG Y X.Development of laser surface cladding technology of mould[J].Forging Stamping Technology,2001,26(4):43-45(in Chinese). |
[7] |
CHEN L ,HUANG F X,ZHAO Y,et al.Effect on microstructure and property of laser cladding about cladding material[J].Ferro-Alloys,2005,36(1):30-32(in Chinese). |
[8] |
ZHANG Zh W,YANG W X,CHEN K,et al.Develop of feeding nozzle for laser cladding rapid prototyping[J].Laser Journal ,2007,28(1):79-80(in Chinese). |
[9] |
JIN X Sh,YANG X Ch,WANG Y Sh,et al.Research on the coaxial powder feeder nozzle in 3-D direct manufacturing and re-manufacturing[J].Applied Laser,2008,28(4):266-270(in Chinese). |
[10] |
GAO Sh Y,YANG X Ch.Design of nozzle for laser coaxial feed powder[J].Journal of Tianjin Institute of Textile Science and Technology,2003,22(5):42-45(in Chinese). |
[11] |
CAI Q F,SHI Sh H,LI Ch Sh,et al.Study on inside-laser powder feeding of laser cladding rapid prototyping[J].Journal of Suzhou University(Engineering Science Edition),2009,29(2):43-45(in Chinese). |
[12] |
ZHANG S Ch,YAO J Q,LIANG E J.Review on laser cladding techniques and cladding alloys design[J].Laser Technology,2002,26(3):204-207(in Chinese). |