[1] |
ZHAO J F,LI J X,SHEN Y F,et al.Fundamental experimental study on nano-Al2O3 bulk materials produced by selective laser sintering technology[J].Chinese Journal of Lasers,2003,30(12):1129-1132(in Chinese). |
[2] |
DOMACK M S,BAUGHMAN F M.Development of nickel-titanium graded composition components[J].Rapid Prototyping Journal,2005,11(1):41-51. |
[3] |
GIBSON I,SHI D P.Material properties and fabrication parameters in selective laser sintering process[J].Rapid Prototyping Journal,1997,3(4):129-136. |
[4] |
GU D D,SHEN Y F,WU P,et al.Processing conditions of Cu based metal powder in selective laser sintering[J].Chinese Journal of Lasers,2005,32(11):1561-1566(in Chinese). |
[5] |
HO H C H,GIBSON I,CHEUNG W L.Effects of energy density on morphology and properties of selective laser polycarbonate[J].Journal of Materials Processing Technology,1999,89(90):204-210. |
[6] |
ZHENG H Zh,ZHANG J,XU Z F,et al.Effects of laser energy density on densities and microstructures of nano-Al2O3/PS composites[J].Chinese Journal of Lasers,2006,33(10):1428-1433(in Chinese). |
[7] |
LI X Sh,SHI Y Sh,HUANG Sh H.Model of scanning laser energy and its distribution in selective laser sintering[J].Laser Technology,2003,27(2):143-149(in Chinese). |
[8] |
PENG X F,SHI Y S,HUANG S H.Research on affecting factors of precision of part made by selective laser sintering[J].China Metal forming Equipment & Technology,2005,23(1):101-102(in Chinese). |
[9] |
HUANG D Y.Plastics properties distinguishing[M].Beijing:Standards Press of China,1990:212-227(in Chinese). |
[10] |
SALMORIA G V,LEITE J L,AHRENS C H,et al.Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering:micro structural characterization[J].Polymer Testing,2007,26(3):361-368. |
[11] |
SALMORIA G V,AHRENS C H,KLAUSS P,et al.Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering[J].Materials Research,2007,10(2):211-214. |
[12] |
PALABIYIK M,BAHADUR S.Mechanical and tribiological properties of polyamide 6 and high density polyethylene polyblends with and without compatibilizer[J].Wear,2000,246(1/2):149-158. |
[13] |
SALMORIA G V,LEITE J L,AHRENS C H,et al.Selective laser sintering of PA12/HDPE blends:effect of components on elastic behavior/plastic behavior[J].Polymer Testing,2008,27(6):654-659. |
[14] |
LIN L L,SHI Y Sh,ZENG F D,et al.Paste resin bleeding through polymeric powder sintering parts:improving mechanical performance by enhancing the interfacial structure[J].Journal of Functional Materials,2003,34(1):67-72. |