| [1] | ZHANG G Sh.The modern technology of laser manufacture[M].Beijing:Chemical Industry Press,2006.91～100(in Chinese). |
| [2] | LIU L,RONG T P,GUO Zh G et al.Application of AutoCAD in laserprocessing through the interface of DXF[J].Laser Technology,2005,29(1):32～34(in Chinese). |
| [3] | ZHANG W N.TMS320C28X DSP's CPU and peripheral[M].Beijing:Tsinghua University Press,2004.79～119(in Chinese). |
| [4] | LEI J Sh,HUANG Zh M,GUO Zh H et al.A laser marker controlled by single chip microcomputer[J].Laser Technology,2001,25(2):140～142(in Chinese). |
| [5] | SONG W X.The technologies of automatic detect[M].Beijing:Metallurgical Industry Press,2000.197～216(in Chinese). |
| [6] | JIANG S M.Protel 99 instances and exercises[M].Beijing:Posts & Telecom Press,2000.35～109(in Chinese). |
| [7] | YU H,ZHAN Zh Q,WU W.Protel 98 interpret details[M].Beijing:Publishing House of Electronics Industry,2000.223～251(in Chinese). |
| [8] | HUANG K J,ZENG D W,XIE Ch Sh.The effects of curvature radius and actting speed on the top kerf uidth of laser cutting of thin pipe with a small diameter[J].Laser Technology,2000,24(1):51～54(in Chinese). |
| [9] | WAN Zh,DU W X.Calibration of graphic distortion and compensation of exposure for dual galvanometer scanning[J].Optics and Precision Engineering,2000,4(2):115～118(in Chinese). |
| [10] | GUAN Zh Zh.The handbook of laser process arts[M].Beijing:China Metrology Publishing House,1998.347～355(in Chinese). |
| [11] | WANG J M.The design of digital system and verilog HDL[M].2nd ed,Beijing:Publishing House of Electronics Industry,2005.221～334(in Chinese). |
| [12] | TAN H Q.The design of C programme[M].2nd ed,Beijing:Tsinghua University Press,1999.13～37(in Chinese). |