[1] JUNG K Y,PARK S B.Photoactivity of SiO2/TiO2 and ZrO2/TiO2 mixed oxides prepared by sol-gel method[J].Materials Letters,2004,58(22/23):2897-2900.
[2] M′ENDEZ-VIVARL J,MENDOZA-SERNA R.SiO2-TiO2 membranes by the sol-gel process[J].Silicon Chemistry,2006,3(1/2):59-64.
[3] ZENG Zh Q,XIAO X Y,GUI Zh L,et al.Al2O3 -SiO2 -TiO2 composite ceramic membranes from sol-gel processing[J].Materials Letters,1998,35(1/2):67-71.
[4] QUE W X,SUN Z,ZHOU Y,et al.Preparation of hard optical coatings based on an organic/inorganic composite by sol-gel method[J].Materials Letters,2000,42(5):326-330.
[5] ZHOU W J,YUAN Y H,ZHANG D Y,et al.Research on damage of TiO2/SiO2 film induced by 1.06μm CW laser[J].Laser Technology,2006,30(1):76-81(in Chinese).
[6] COUTIER C,AUDIER M,FICK J,et al.Aerosol-gel preparation of optically active layers in the system Er SiO2-TiO2[J].Thin Solid Films,2000,372(1/2):177-189.
[7] KARTHIKEYAN A,ALMEIDA R M.Crystallization of SiO2-TiO2glassy films studied by atomic force microscopy[J].Journal of Non-Crystalline Solids,2000,274(1/3):169-174.
[8] HIROSE T,FOKINE M,SAITO K,et al.Waveguide writing by CO2 laser annealing on sputtered silica film[J].Journal of Non-Crystalline Solids,2006,352(6/7):664-668.
[9] LI X Y,LI H L,LIU J W,et al.Conductive line preparation on resin surfaces by laser micro-cladding conductive pastes[J].Applied Surface Science,2004,233(1/4):51-57.
[10] HUANG J F.Principle and technology of sol-gel[M].Beijing:Chemical Industry Press,2005:116(in Chinese).