[1] SHI Y S,ZHONG J W,CAI D S,et al.Investigation on the preheating temperature control based on part's slicing in selective laser sintering[J].Chinese Journal of Mechanical Engineering,2006,42(6):67-72(in Chinese).
[2] LI X S,SHI Y S,HUANG S H.Investigation on preheating of powder in SLS machine[J].Chinese Journal of Mechanical Engineering,2002,38(3):94-98(in Chinese).
[3] CHENG J,CAI D S,SHI Y S.Numerical simulation of temperature field of preheating process in selective laser sintering[J].New Technology New Process,2006(5):75-77(in Chinese).
[4] LONG R Sh,LIU W J.Numerical simulation of thermal stress on laser metal deposition shaping[J].High Technology Letters,2007,17(2):46-51(in Chinese).
[5] LONG R Sh,LIU W J,SHANG X F.Numerical simulation of temperature field on laser metal deposition shaping[J].Laser Technology,2007,31(4):394-396(in Chinese).
[6] ZHANG J Y,GAO L X,CUI L L,et al.Analysis of the temperature field induced by laser strengthening[J].Laser Technology,2006,30(1):56-59(in Chinese).
[7] ZENG D W,XIE Ch Sh.A numerical simulation for three dimensional quasi state fluid flow field and temperature field in molten pool for composite coating system[J].Laser Technology,2000,24(6):370-374(in Chinese).
[8] WANG X F,LÜ X D,CHEN G N,et al.Simulation and verification of the temperature field in laser hardening[J].Laser Technology,2004,28(2):162-165(in Chinese).
[9] XI M Zh,YU G.Numerical simulation for the transient temperature field of 3-D moving laser molten pool[J].Chinese Journal of Lasers,2004,31(12):1527-1532(in Chinese).
[10] XI M Zh,ZHANG Y Zh,SHI L K,et al.Numerical simulation of 3-D transient temperature field in thin-wall metal parts fabricated by laser direct deposition[J].The Chinese Journal of Nonferrous Metals,2003,13(4):887-892(in Chinese).
[11] YANG J.Research on mechanical behavior of laser rapid forming metal part[D].Xi'an:Northwestern Polytechnical University,2004:35-69(in Chinese).