[1] 刘禹, 单颖春, 刘献栋, 等. 高温对汽车灰铸铁制动盘热疲劳裂纹萌生寿命的影响[J]. 机械工程学报, 2019, 55(8): 97-105.LIU Y, SHAN Y Ch, LIU X D, et al. Effect of high temperature on thermal fatigue crack initiation life of automotive gray cast iron brake disc[J]. Journal of Mechanical Engineering, 2019, 55(8): 97-105(in Chinese).
[2] 李淼莹, 张晨强, 李瑞斌. 合金元素含量对制动盘锈蚀的影响[J]. 汽车实用技术, 2022, 47(23): 165-168.LI M Y, ZHANG Ch Q, LI R B. Influence of alloy element content on the rust of brake discs[J]. Automobile Technology, 2022, 47(23): 165-168(in Chinese).
[3] 时晓宇, 温道胜, 王守仁, 等. 激光熔覆灰铸铁制动盘Fe-Ni-Cr梯度复合涂层微观组织及高温摩擦磨损性能研究[J]. 中国激光, 2022, 49(2): 0202017.SHI X Y, WEN D Sh, WANG Sh R, et al. Microstructures and high-temperature friction and wear properties of laser cladded Fe-Ni-Cr gradient composite coating for brake disc[J]. Chinese Journal of Lasers, 2022, 49(2): 0202017(in Chinese).
[4] 王立新, 张硕研, 纪运广, 等. 超疏水表面仿生原型制备技术研究分析[J]. 河北科技大学学报, 2020, 41(1): 1-13. doi: 10.3969/j.issn.1671-1653.2020.01.001WANG L X, ZHANG Sh Y, JI Y G, et al. Research analysis of superhydrophobic bionic prototype preparation technology[J]. Journal of Hebei University of Science and Technology, 2020, 41(1): 1-13(in Chinese). doi: 10.3969/j.issn.1671-1653.2020.01.001
[5] RAGHURAM H, KATSICH C, PICHELBAUER K, et al. Design of wear and corrosion resistant FeNi-graphite composites by laser cladding[J]. Surface and Coatings Technology, 2019, 377: 124897. doi: 10.1016/j.surfcoat.2019.124897
[6] JABBARI M, HOSSEINZADEH A. Numerical modeling of coupled heat transfer and phase transformation for solidification of the gray cast iron[J]. Computational Materials Science, 2013, 68: 160-165. doi: 10.1016/j.commatsci.2012.10.034
[7] ZHOU Y X, ZHANG J, XING Zh G, et al. Microstructure and properties of NiCrBSi coating by plasma cladding on gray cast iron[J]. Surface and Coatings Technology, 2019, 361: 270-279. doi: 10.1016/j.surfcoat.2018.12.055
[8] INOUE T, TORIZUKA S. Effect of heat treatmemt in (α+γ) range on mechanical properties of austempered spheroidal graphite cast iron[J]. Materials Science Forum, 2018, 941: 558-561. doi: 10.4028/www.scientific.net/MSF.941.558
[9] ZHANG M, ZHOU X, YU X, et al. Synthesis and characterization of refractory TiZrNbWMo high-entropy alloy coating by laser cladding[J]. Surface and Coatings Technology, 2017, 311: 321-329. doi: 10.1016/j.surfcoat.2017.01.012
[10] FARAHMAND P, LIU S, ZHANG Z, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40(10): 15421-15438. doi: 10.1016/j.ceramint.2014.06.097
[11] ZAREZADEH M M, SHAMANIAN M, SAIDI A, et al. Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior[J]. Ceramics International, 2014, 40(8): 13447-13452. doi: 10.1016/j.ceramint.2014.05.065
[12] DOUBENSKAIA M, PAVLOV M, GRIGORIEV S, et al. Definition of brightness temperature and restoration of true temperature in laser cladding using infrared camera[J]. Surface and Coatings Technology, 2013, 220: 244-247. doi: 10.1016/j.surfcoat.2012.10.044
[13] SMUROV I, DOUBENSKAIA M, ZAITSEV A. Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation[J]. Surface and Coatings Technology, 2013, 220: 112-121. doi: 10.1016/j.surfcoat.2012.10.053
[14] 刘小萍, 田文怀, 杨峰, 等. 时效处理SUS316L不锈钢中析出相的晶体结构和化学成分[J]. 材料热处理学报, 2006, 27(3): 81-85. doi: 10.3969/j.issn.1009-6264.2006.03.018LIU X P, TIAN W H, YANG F, et al. Crystal structure and chemical composition of precipitates in an aged SUS316L stainless steel[J]. Transactions of Materials and Heat Treatment, 2006, 27(3): 81-85(in Chinese). doi: 10.3969/j.issn.1009-6264.2006.03.018
[15] 王燕燕, 李家豪, 舒林森, 等. 基于RSM与NSGA-Ⅱ算法的激光熔覆参数多目标优化[J]. 激光与光电子学进展, 2022, 59(7): 0714004.WANG Y Y, LI J H, SHU L S, et al. Multi-objective optimization of laser cladding parameters based on RSM and NSGA-Ⅱ algorithm[J]. Laser & Optoelectronics Progress, 2022, 59(7): 0714004 (in Chinese).
[16] BYCHKOV A S, FEDIRKO V N. Analysis of the in-service failures of metal structures of the aircraft equipment[J]. Materials Science, 2016, 52: 9-16. doi: 10.1007/s11003-016-9920-6
[17] CHEN H X, LIU W, KONG D J. Effect of extrusion temperatures on friction-wear behavior of chain-wheel fabricat ed by 40Cr steel under oil-lubrication condition[J]. Journal of Wuhan University of Technology (Materials Science Edition), 2019, 34(3): 684-691. doi: 10.1007/s11595-019-2104-0
[18] MA M, XIONG W, LIAN Y, et al. Modeling and optimization for laser cladding via multi-objective quantum-behaved particle swarm optimization algorithm[J]. Surface and Coatings Technology, 2020, 381: 125129. doi: 10.1016/j.surfcoat.2019.125129
[19] WANG Sh, SHAO S Ch, BI Sh P, et al. Study on microstructure and properties of laser cladding Fe-based alloy layer on TC4 surface[J]. Laser Technology, 2022, 46(5): 653-656(in Chinese).