钛合金部件激光再制造材料与工艺研究进展

李俊辉; 任维彬; 任玉中; 雷卫宁; 李俊辉; 任维彬; 任玉中; 雷卫宁

doi:10.7510/jgjs.issn.1001-3806.2023.03.011

[1]

霍东兴, 梁精龙, 李慧, 等. 钛合金研究及应用进展[J]. 铸造技术, 2016, 37(10): 2065-2066.HUO D X, LIANG J L, LI H, et al. Progress of research and application of titanium alloy[J]. Foundry Technology, 2016, 37(10): 2065-2066(in Chinese).

[2]

李毅, 赵永庆, 曾卫东. 航空钛合金的应用及发展趋势[J]. 材料导报, 2020, 34(Z1): 280-282.LI Y, ZHAO Y Q, ZENG W D. Application and development of aerial titanium alloys[J]. Materials Reports, 2020, 34(Z1): 280-282(in Chinese).

[3]

WENG F, CHEN Ch Zh, YU H J. Research status of laser cladding on titanium and its alloys: A review[J]. Materials & Design, 2014, 58: 412-425.

[4]

关振中. 激光加工工艺手册[M]. 2版. 北京: 中国计量出版社, 2007: 288-293.GUAN Zh Zh. Laser processing technology manual[M]. 2nd ed. Beijing: China Metrology Publishing House, 2007: 288-293(in Chin-ese).

[5]

CHEN J M, GUO Ch, ZHOU J S. Microstructure and tribological properties of laser cladding Fe-based coating on pure Ti substrate[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(9): 2171-2178. doi: 10.1016/S1003-6326(11)61445-3

[6]

沈婧怡, 任维彬, 薛亚平, 等. TC4叶片裂纹及体积损伤激光修复工艺方法[J]. 红外与激光工程, 2019, 48(6): 0606008.SHEN J Y, REN W B, XUE Y P, et al. Laser repairing process of TC4 blades with crack and volume damage[J]. Infrared and Laser Engineering, 2019, 48(6): 0606008(in Chinese).

[7]

JEYAPRAKASH N, YANG Ch H, TSENG S P. Characterization and tribological evaluation of NiCrMoNb and NiCrBSiC laser cladding on near-α titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(5): 2347-2361.

[8]

覃鑫, 祁文军, 左小刚. TC4钛合金表面激光熔覆NiCrCoAlY-Cr₃C₂复合涂层的摩擦和高温抗氧化性能[J]. 材料工程, 2021, 49(12): 107-114.QIN X, QI W J, ZUO X G. Friction and high temperature oxidation resistance of laser cladding NiCrCoAlY-Cr₃C₂ composite coating on TC4 titanium alloy[J]. Journal of Materials Engineering, 2021, 49(12): 107-114(in Chinese).

[9]

LIU S S, WANG Y H, ZHANG W P. Microstructure and wear resistance of laser clad cobalt-based composite coating on TA15 surface[J]. Rare Metal Materials and Engineering, 2014, 43(5): 1041-1046. doi: 10.1016/S1875-5372(14)60097-7

[10]

WENG F, YU H J, CHEN Ch Zh, et al. Microstructures and wear properties of laser cladding Co-based composite coatings on Ti-6Al-4V[J]. Materials & Design, 2015, 80: 174-181.

[11]

DIAO Y H, ZHANG K M. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB₂ powders[J]. A-pplied Surface Science, 2015, 352: 163-168. doi: 10.1016/j.apsusc.2015.04.030

[12]

WANG W F, JIN L Sh, YANG J G, et al. Directional growth whisker reinforced Ti-base composites fabricated by laser cladding[J]. Surface and Coatings Technology, 2013, 236: 45-51. doi: 10.1016/j.surfcoat.2013.05.052

[13]

任维彬, 薛亚平, 周金宇, 等. 激光再制造边部减薄Ti-6Al-4V叶片覆层与界面性能控制[J]. 稀有金属材料与工程, 2020, 49(7): 2400-2406.REN W B, XUE Y P, ZHOU J Y, et al. Coating and interface performance control of Ti-6Al-4V blade with thinned edge for laser remanufacture[J]. Rare Metal Materials and Engineering, 2020, 49(7): 2400-2406(in Chinese).

[14]

谭金花, 孙荣禄, 牛伟, 等. TC4合金激光熔覆材料的研究现状[J]. 材料导报, 2020, 34(8): 15132-15137.TAN J H, SUN R L, NIU W, et al. Research status of TC4 alloy laser cladding materials[J]. Materials Reports, 2020, 34(8): 15132-15137(in Chinese).

[15]

SAMAR A S A, ABDEL H, ADEL N, et al. Laser powder cladding of Ti-6Al-4V α/β alloy[J]. Materials, 2017, 10(10): 1178-1193. doi: 10.3390/ma10101178

[16]

刘新乾, 周后明, 赵振宇, 等. TiB₂含量对激光熔覆钴基涂层组织和性能的影响[J]. 金属热处理, 2018, 43(10): 168-172.LIU X Q, ZHOU H M, ZHAO Zh Y, et al. Effect of TiB₂ content on microstructure and properties of laser clad Co-based coating[J]. Heat Treatment of Metals, 2018, 43(10): 168-172(in Chinese).

[17]

刘亚楠, 谷米, 孙荣禄, 等. 钛合金表面激光熔覆原位制备TiC/Ti₂Ni复合涂层微观组织及性能研究[J]. 中国激光, 2021, 48(14): 1402011.LIU Y N, GU M, SUN R L, et al. Microstructure and properties of in-situ TiC/Ti₂Ni composite coating prepared via laser cladding on titanium alloy[J]. Chinese Journal of Lasers, 2021, 48(14): 1402011(in Chinese).

[18]

ZHANG H X, DAI J J, MA Z W, et al. Effect of Y₂O₃ on microstructures and wear resistance of TiC reinforced Ti-Al-Si coating by laser cladding on TC4 alloy[J]. Surface Review and Letters, 2019, 26(10): 1950077. doi: 10.1142/S0218625X1950077X

[19]

DAS A K, SHARIFF S M, CHOUDHURY A R. Effect of rare earth oxide (Y₂O₃) addition on alloyed layer synthesized on Ti-6Al-4V substrate with Ti+SiC+h-BN mixed precursor by laser surface engineering[J]. Tribology International, 2016, 95: 35-43. doi: 10.1016/j.triboint.2015.10.035

[20]

GONG Y L, WU M P, MIAO X J, et al. Effect of CeO₂ on crack sensitivity and tribological properties of Ni60A coatings prepared by laser cladding[J/OL]. (2021-04-28)[2022-04-07]. https://journals.sagepub.com/doi/10.1177/16878140211013125.

[21]

何星华, 许晓静, 戈晓岚, 等. TC4钛合金表面激光熔覆含La₂O₃的F101镍基涂层[J]. 稀有金属材料与工程, 2017, 46(4): 1074-1079.HE X H, XU X J, GE X L, et al. F101 Ni-based coating containing La₂O₃ by laser cladding on TC4 titanium alloy[J]. Rare Metal Materials and Engineering, 2017, 46(4): 1074-1079(in Chinese).

[22]

MOHAMMAD N, REZA S R, MASOUD B. An empirical-statistical model for laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate[J]. Optics and Laser Technology, 2018, 100: 265-271. doi: 10.1016/j.optlastec.2017.10.015

[23]

赵欣鑫, 肖华强, 游川川, 等. TC4表面激光熔覆TiAl合金涂层的工艺和组织性能[J]. 激光技术, 2021, 45(6): 697-702.ZHAO X X, XIAO H Q, YOU Ch Ch, et al. Process and microstructure properties of laser cladding TiAl alloy coating on TC4 surface[J]. Laser Technology, 2021, 45(6): 697-702(in Chinese).

[24]

高霁, 宋德阳, 冯俊文. 工艺参数对钛合金激光熔覆CBN涂层几何形貌的影响[J]. 表面技术, 2015, 44(1): 77-87.GAO J, SONG D Y, FENG J W. Influence of processing parameters on geometrical features of CBN coatings by laser cladding on titanium alloy surface[J]. Surface Technology, 2015, 44(1): 77-87(in Chinese).

[25]

张晓伟, 刘洪喜, 蒋业华, 等. 激光铝热还原法制备Al₂O₃/Ti-Al基复合涂层[J]. 无机材料学报, 2013, 28(9): 1033-1039.ZHANG X W, LIU H X, JIANG Y H, et al. Microstructure of Al₂O₃/Ti-Al composite coatings prepared by laser aluminum thermal reduction processing[J]. Journal of Inorganic Materials, 2013, 28(9): 1033-1039(in Chinese).

[26]

WENG F, YU H J, CHEN Ch Zh, et al. Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloy[J]. Journal of Alloys and Compounds, 2017, 692: 989-996. doi: 10.1016/j.jallcom.2016.09.071

[27]

谭金花, 孙荣禄, 牛伟, 等. 激光扫描速度对TC4合金表面激光熔覆复合涂层组织及性能的影响[J]. 材料导报, 2020, 34(6): 12094-12100.TAN J H, SUN R L, NIU W, et al. Effect of laser scanning speed on microstructure and properties of TC4 alloy surface laser cladding composite coating[J]. Materials Reports, 2020, 34(6): 12094-12100(in Chinese).

[28]

邱莹, 张凤英, 胡腾腾, 等. 激光功率对TC4表面熔覆Ti40阻燃钛合金组织及硬度的影响[J]. 中国激光, 2019, 46(11): 1102011.QIU Y, ZHANG F Y, HU T T, et al. Effect of laser power on microstructure and hardness of Ti40 flame-retardant titanium alloy deposited by laser cladding on TC4 surface[J]. Chinese Journal of Lasers, 2019, 46(11): 1102011(in Chinese).

[29]

赵盛举, 祁文军, 黄艳华, 等. TC4表面激光熔覆Ni60基涂层温度场热循环特性数值模拟研究[J]. 表面技术, 2020, 49(2): 301-308.ZHAO Sh J, QI W J, HUANG Y H, et al. Numerical simulation study on thermal cycle characteristics of temperature field of TC4 surface laser cladding Ni60 based coating[J]. Surface Technology, 2020, 49(2): 301-308(in Chinese).

[30]

马俊峰, 王骏, 唐立平, 等. 钛合金表面激光熔覆碳化硼/钴基复合涂层的温度场模拟及试验研究[J]. 应用激光, 2021, 41(4): 732-737.MA J F, WANG J, TANG L P, et al. Temperature field simulation and experimental research of boron carbide/cobalt-based composite coating fabricated by laser cladding on titanium Alloy[J]. Applied Laser, 2021, 41(4): 732-737(in Chinese).

[31]

郭卫, 李凯凯, 柴蓉霞, 等. 激光熔覆304不锈钢稀释效应的数值模拟与实验[J]. 激光与光电子学进展, 2019, 56(5): 051402.GUO W, LI K K, CHAI R X, et al. Numerical simulation and experiment of dilution effect of laser cladding 304 stainless steel[J]. Laser & Optoelectronics Progress, 2019, 56(5): 051402(in Chin-ese).

[32]

王予, 黄延禄, 杨永强. 同轴送粉激光定向能量沉积IN718的数值模拟[J]. 中国激光, 2021, 48(6): 0602115.WANG Y, HUANG Y L, YANG Y Q. Numerical simulation on coaxial powder feeding laser directional energy deposition of IN718[J]. Chinese Journal of Lasers, 2021, 48(6): 0602115(in Chin-ese).

[33]

张天刚, 张倩, 姚波, 等. TC4表面Ni基激光熔覆层温度场和应力场的数值模拟[J]. 激光与光电子学进展, 2021, 58(3): 0314003.ZHANG T G, ZHANG Q, YAO B, et al. Numerical simulation of temperature field and stress field of Ni-based laser cladding layer on TC4 surface[J]. Laser & Optoelectronics Progress, 2021, 58(3): 0314003(in Chinese).

[34]

梁广冰, 朱锦洪, 尹丹青, 等. TC4钛合金激光熔覆路径选择数值模拟研究[J]. 河南科技大学学报(自然科学版), 2021, 42(6): 12-18.LIANG G B, ZHU J H, YI D Q, et al. Numerical simulation of laser cladding path selection for TC4 titanium alloy[J]. Journal of Henan University of Science and Technology (Natural Science Edition), 2021, 42(6): 12-18(in Chinese).

[35]

赫庆坤, 宋立新. 不同厚度基体激光熔覆应力分析[J]. 激光杂志, 2018, 39(1): 60-63.HE Q K, SONG L X. Stress analysis of laser cladding on different thickness substrates[J]. Journal of Laser, 2018, 39(1): 60-63(in Chinese).

[36]

LEI Y W, SUN R L, TANG Y, et al. Numerical simulation of temperature distribution and TiC growth kinetics for high power laser clad TiC/NiCrBSiC composite coatings[J]. Optics and Laser Technology, 2011, 44(4): 1141-1147.

[37]

李德英, 张坚, 邓志成. 增强相颗粒对激光熔注凝固组织影响的相场法研究[J]. 热加工工艺, 2018, 47(10): 179-182.LI D Y, ZHANG J, DENG Zh Ch. Phase field study on the effect of reinforced phase particles on the solidification structure of laser melt injection[J]. Hot Working Technology, 2018, 47(10): 179-182(in Chinese).

[38]

齐海波, 张云浩, 冯校飞, 等. 多元合金激光增材制造凝固组织演变模拟[J]. 焊接学报, 2020, 41(5): 71-77.QI H B, ZHANG Y H, FENG X F, et al. Simulation of solidification microstructure evolution in laser additive manufacturing of multicomponent alloy[J]. Transactions of the China Welding Institution, 2020, 41(5): 71-77(in Chinese).

[39]

MA G Y, YAN S, WU D J, et al. Microstructure evolution and mechanical properties of ultrasonic assisted laser clad yttria stabilized zirconia coating[J]. Ceramics International, 2017, 43(13): 9622-9629.

[40]

杨光, 薛雄, 钦兰云, 等. 旋转磁场对激光熔凝钛合金熔池的影响[J]. 稀有金属材料与工程, 2016, 45(7): 1804-1810.YANG G, XUE X, QIN L Y, et al. Influence of a rotating magnetic field on laser melting titanium alloy melt pool[J]. Rare Metal Materials and Engineering, 2016, 45(7): 1804-1810(in Chinese).

[41]

李成, 王玉玲, 姜芙林, 等. 超声辅助对激光熔覆Al₂O₃-ZrO₂陶瓷涂层力学性能的影响[J]. 表面技术, 2020, 49(11): 309-319.LI Ch, WANG Y L, JIANG F L, et al. Effect of ultrasonic assistance on mechanical properties of laser cladding Al₂O₃-ZrO₂ ceramic coating[J]. Surface Technology, 2020, 49(11): 309-319(in Ch-inese).

[42]

REN W B, ZHUANG B L, LEI W N, et al. Microstructure and performance evolution of Ti-6Al-4V alloy coating by laser cladding and laser shocking composite remanufacture[J]. Optics and Laser Technology, 2021, 143: 107342.

[43]

FARAYIBI P K, ABIOYE T E, MURRAY J W, et al. Surface improvement of laser clad Ti-6Al-4V using plain water jet and pulsed electron beam irradiation[J]. Journal of Materials Processing Technology, 2015, 218: 1-11.

[44]

李崇桂, 封小松, 卢庆华, 等. 激光重熔Al₂O₃-TiO₂涂层的强韧性能[J]. 焊接学报, 2013, 34(9): 63-66.LI Ch G, FENG X S, LU Q H, et al. Strength and toughness of laser-remelted Al₂O₃-TiO₂ coatings[J]. Transactions of the China Welding Institution, 2013, 34(9): 63-66(in Chinese).