| [1] | ZHU M X, XU X, LI Y M, et al. Research status on metal-toughed alumina ceramics[J]. Chinese Ceramics, 2012, 148(12):10-13(in Chinese). |
| [2] | ZHANG F L, FENG D J, SHI J C, et al. Rotary ultrasonic machining technology of ceramic material[J]. Electromachining & Mould, 2001(1):1-5(in Chinese). |
| [3] | QI L T. Ultra-short pulsed laser microfabrication technology[M]. Harbin:Harbin Engineering University Press, 2012:22-25(in Chin-ese). |
| [4] | SCHULZ W, EPPELT U, POPRAWE R. Review on laser drilling Ⅰ. Fundamentals, modeling, and simulation[J]. Journal of Laser Applications, 2013, 25(1):12006. doi: 10.2351/1.4773837 |
| [5] | ZHANG F, DUAN J, ZENG X, et al. UV laser microprocessing and post chemical etching on ultrathin Al2O3 ceramic substrate[J]. Journal of the European Ceramic Society, 2011, 31(9):1631-1639. doi: 10.1016/j.jeurceramsoc.2011.03.034 |
| [6] | ADELMANN B, HELLMANN R. Rapid micro hole laser drilling in ceramic substrates using single mode fiber laser[J]. Journal of Materials Processing Technology, 2015, 221(1):80-86. |
| [7] | HSU J, LIN W, CHANG Y, et al. Continuous-wave laser drilling assisted by intermittent gas jets[J]. The International Journal of Advanced Manufacturing Technology, 2015, 79(1/4):449-459. |
| [8] | ZHANG F. Study on UV laser microprocessing technology and mechanism for electronic materials[D]. Wuhan: Huazhong University of Science and Technology, 2012: 87-102(in Chinese). |
| [9] | ZHANG G, LIANG Y. Study on laser drilling alumina ceramic of recast layer research[J]. Journal of ShenYang Institute of Technology, 2001, 20(2):1-4(in Chinese). |
| [10] | LI C, LEE S, NIKUMB S. Femtosecond laser drilling of alumina wafers[J]. Journal of Electronic Materials, 2009, 38(9):20116-20121. |
| [11] | WANG X C, ZHENG H Y, CHU P L, et al. Femtosecond laser drilling of alumina ceramic substrates[J]. Applied Physics, 2010, A101(2):271-278. |
| [12] | KONG L R, ZHANG F, DUAN J, et al. Research of water-assisted laser etching of alumina ceramics[J]. Laser Technology, 2014, 38(3):330-334(in Chinese). |
| [13] | TSAI C, LI C. Investigation of underwater laser drilling for brittle substrates[J]. Journal of Materials Processing Technology, 2009, 209(6):2838-2846. doi: 10.1016/j.jmatprotec.2008.06.057 |
| [14] | KRUUSING A. Underwater and water-assisted laser processing:Part 1-general features, steam cleaning and shock processing[J]. Optics and Lasers in Engineering, 2004, 41(2):307-327. doi: 10.1016/S0143-8166(02)00142-2 |
| [15] | LIU Y Zh, ZHU Y T, ZHU G X, et al. Study of underwater spot spread of collimated laser beam[J]. Chinese Journal of Lasers, 2001, 28(7):617-620(in Chinese). |