[1] JIANG H Y. Materials and production techniques applied in engine connecting rod[J]. Internal Combustion Engine & Parts, 2013, 34(10):23-26(in Chinese).
[2] HUANG W D, LI Y M, FENG L P, et al. laser solid forming of metal powder materials[J]. Journal of Materials Engineering, 2002, 30(3):40-43(in Chinese).
[3] LI H Y, SHI Sh H, FU G Y, et al. Control of process parameters of reducing solid of revolution with coaxial inside-beam powder feeding accumulation[J]. Chinese Journal of Lasers, 2011, 38(8):0803012(in Chinese). doi: 10.3788/CJL
[4] CAI W, FU G Y, SHI Sh H, et al. Research on thickness control of variable diameter solid with coaxial inside-beam powder feeding laser cladding by defocusing technique[J]. Chinese Journal of Lasers, 2012, 39(7):0703003(in Chinese). doi: 10.3788/CJL
[5] WANG K, YANG H O, LIU F Ch, et al. Stress and deformation finite element method simulation of thin wall part with pre-deformation subtract during laser solid forming[J]. Chinese Journal of Lasers, 2012, 39(6):0603002(in Chinese). doi: 10.3788/CJL
[6] FANG Q Q, FU G Y, WANG C, et al. Laser direct forming technology of double thin-wallet parts with connecting ribs[J]. Chinese Journal of Lasers, 2017, 44(2):0202005(in Chinese). doi: 10.3788/CJL
[7] SONG X H, ZHOU Y F, XING J K, et al. Comparison between laser cladding Fe-based and Ni-based alloy coatings on 35CrMo[J]. Laser Technology, 2015, 39(1):39-45(in Chinese).
[8] SHI B F, ZHANG A F, QI B L, et al. Influence of heat accumulation on microstructure and property of Ti-6Al-4V in laser direct forming[J]. Laser Technology, 2016, 40(1):29-32(in Chinese).
[9] ZHOU S, DAI X, ZHENG H. Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding[J]. Optics & Laser Technology, 2012, 44(1):190-197.
[10] CUI Z Q, YANG H W, WANG W X, et al. Laser cladding Al-Si/Al2O3-TiO2 composite coatings on AZ31B magnesium alloy[J]. Journal of Wuhan University of Technology(Materials Science Edition), 2012, 27(6):1042-1047. doi: 10.1007/s11595-012-0597-x
[11] CHEN J F, WANG J T, ZHOU J Y. Research process of laser cladding on magnesium alloy surface[J]. Laser Technology, 2015, 39(5):631-636(in Chinese).
[12] WANG H M. Materials' fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(10):2690-2698(in Chinese).
[13] LU Z L, LI D C, LU B H, et al. Investigation into the direct laser forming process of steam turbine blade[J]. Optics and Laser in Engineering, 2011, 49(9/10):1101-1110.
[14] LIU S Q, GUO Y Sh, YANG Y L, et al. Investigation on orthogonal experiments of laser cladding anti-wear resistance coating on H13 steel[J]. Laser Technology, 2015, 39(3):399-404(in Chinese).
[15] GAO J, SONG D Y, FENG J W. Influence of processing parameters on geometrical features of CBN coatings by laser cladding on titanium alloy surface[J]. Surface Technology, 2015, 44(1):77-80(in Chinese).
[16] CHEN L, TAO R, LOU D Y, et al. Analysis of the mechanism cracking during the multipass laps cladding experiment.Laser & Optoelectronics Progress, 2014, 51(10):101401(in Chinese).
[17] XIE J X. New technique and new technology of material processing[M]. Beijing:Metallurgical Industry Press, 2004:16-20(in Chinese).
[18] ZHU X M. Study of development and application of high-apeed cutting tool materials[J]. Machinery Design & Manufacture, 2012, 50(11):244-245(in Chinese).
[19] WANG Zh H, LI Sh, GE Y, et al. Research on micstructure and mechanical properties and fracture splitting properties of forged connecting rod of C70S6 non-quenched and tempered steel[J]. Hot Working Technology, 2015, 44(19):39-43(in Chinese).
[20] ILIA E, LANNI G, XIN J, et al. Investigation on high strength powder metal forged connecting rods[J]. Transactions of CSICE, 2008, 26(5):463-469(in Chinese).
[21] BAI L N, LIU F P, WANG S, et al. Micstructure and mechanical properties of Fe-C-Cu powder-forged connecting rod[J]. Acta Metallurgica Sinica, 2016, 52(1):41-50(in Chinese).