[1] BATAHGY E, MONEM A. Laser beam welding of austenitic stainless steels-similar butt and dissimilar lap joints[J]. INTECH Open Science Open Minds, 2012,11(5):93-116.
[2] GHAINI F M, HAMEDI M J, TORKAMANY M J, et al. Weld metal microstructural characteristics in pulsed Nd:YAG laser welding[J].Scripta Materialia, 2007, 56(11):955-958.
[3] YOU D Y, GAO X D. Research status and prospect of laser welding technology[J]. Welding Technology, 2008, 12(4):5-9.
[4] WANG J C. Development and expectation of laser welding technology[J]. Laser Technology, 2001,25(1):48-54(in Chinese).
[5] TORKAMANY M J, SABBAGHZADEH J, HAMEDI M J. Effect of laser welding mode on the microstructure and mechanical performance of dissimilar laser spot welds between low carbon and austenitic stainless steels[J]. Materials Design, 2012, 34(2):666-672.
[6] ESFAHANI M N, COUPLAND J, MARIMUTHU S. Microstructure and mechanical properties of a laser welded low carbon-stainless steel joint[J]. Journal of Materials Processing Technology, 2014, 214(12):2941-2948.
[7] AAAUNCAO E, WILLIAMS S, YAPP D. Interaction time and beam diameter effects on the conduction mode limit[J]. Optics and Lasers in Engineering, 2012, 50(6):823-828(in Chinese).
[8] ZHANG B. Study on the technological properties and mechanical properties of laser spot welding of low carbon steel[D]. Harbin:Harbin Institute of Technology, 2007:231-273(in Chinese).
[9] TORAKMANY M J, HAMEDI M J, MALEK F, et al. The effect of process parameters on keyhole welding with a 400W Nd:YAG pulsed laser[J]. Journal of Physics, 2006, D39(21):45-63.
[10] AMERICAN WELDING SOCIETY.Recommended practices for test methods for evaluating the resistance spot welding behavior of automotive sheet steel materials[S]. Miami, USA:American Welding Society, 1997:D8.9M.
[11] MARASHI P, POURANVARI M, AMIRABDOLLAHIAN S, et al. Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels[J]. Materials Science and Engineering, 2008, A480(1):175-180.
[12] LIU S H. Laser manufacturing technology[M]. Wuhan:Huazhong University of Science Technology Press, 2011:113-116(in Chinese).
[13] KUO T Y, LIN H C. Effects of pulse level of Nd:YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys[J]. Materials Science and Engineering, 2006, A 416(1/2):281-289.
[14] ALIZADEH-SH M, FALSAFI F, MASOUMI M, et al. Laser spot welding of AISI 304L:metallurgical and mechanical properties[J]. Ironmaking Steelmaking, 2014, 41(3):161-165.
[15] LIAO Y C, YU M H. Effects of laser beam energy and incident angle on the pulse laser welding of stainless steel thin sheet[J]. Journal of Materials Processing Technology, 2007, 190(1):102-108.
[16] UI-HAMID A, TAWANCY H M, ABBAS N M. Failure of weld joints between carbon steel pipe and 304 stainless steel elbows[J]. Engineering Failure Analysis, 2005, 12(2):181-191.