[1] LEI J P,YAN Sh H,SHEN Sh W.Research on measuring system of thread parameters by CCD vision[J].Manufacturing TechnologyMachine Tools,2010,32(4):96-99(in Chinese).
[2] ZHANG H Y,ZHANG G X.Online test system of large screw thread[J].Chinese Journal of Mechanical Engineering,2008,44(12):199-202(in Chinese).
[3] SHEN Sh W,YAN Sh H,ZHOU Ch L,et al.Research of automatic detection technology of thread paraments based on CCD vision[J].Semiconductor Optoelectronics,2007,28(6):865-869(in Chin-ese).
[4] YANG L J.Research on image processing method in taper thread-online measuring system[D].Xi'an:Xi'an Electronic and Engineering University,2006:1-2(in Chinese).
[5] WANG W Q,SHAO D X,JIANG J F,et al.Reasearch on optical microscope measuring method of external thread parameters based charge-couple device[J].Applied MechanicsMaterials,2012,163(39):39-43(in English).
[6] WU D X.Research on measurement and evaluation system of the screw thread via machine vision technology[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2010:4(in Chinese).
[7] ZHU G,ZHU X F.Reading system for thread features based on image recognition[J].ComputerDigital Engineering,2010,38(11):156-159(in Chinese)..
[8] CHEN M L.Vertical projection measuring method for male thread and its application analysis[J].Laser Technology,2012,36(6):793-797(in Chinese).
[9] CHEN M L.Error analysis of thread measurement with machine vision[J].Laser Technology,2014,38(1):109-113(in Chinese).
[10] JOSHUA M,YU L J.Application of digital image analysis method in metric screw thread metrology[J].Journal of Shanghai University (English Edition),2004,8(2):208-212.
[11] HE F J,ZHANG R J,LAN Sh,et al.Measurements of non-contact external tapered thread based on bear array CCD[J].Journal of Harbin Institute of Technology,2008,40(7):1169-1172(in Chinese).
[12] SHEN M H,SHEN Sh F,WANG X Ch,et al.Distortion calibration of parallel screw thread form based on non-contact measurement[J].Chinese Journal of Agricultural Machinery,2011,42(10):224-229(in Chinese).
[13] SONG L M,QIN M C,YANG Y G,et al.Gear machining error detection based on laser vision method[J].Opto-Electronic Engineering,2015,42(1):1-5(in Chinese).
[14] CANNY J.A computational approach to edge detection[J].IEEE Transaction on Pattern Analysis and Machine Intelligence,1986,8(6):679-698.
[15] YU M Zh.Research on image magnification algorithm based on sub-pixel edge detection[D].Harbin:Harbin Engineering University,2013:29-31(in Chinese).
[16] ZHANG Z.A flexible new technique for camera calibration[J].IEEE Transaction on Pattern Analysis and Machine Intelligence,2000,22(11):1330-1334.