[1] |
SCHULZ W, EPPELT U, POPRAWE R. Review on laser drilling Ⅰ. Fundamentals, modeling, and simulation[J]. Journal of Laser Applications, 2013, 25(1):012006. |
[2] |
ASHKENASI D, KASZEMEIKAT T, MUELLER N, et al. Laser trepanning for industrial applications[J]. Physics Procedia, 2011, 12(1):323-331. |
[3] |
SCHULZ W, EPPELT U. The theory of laser materials processing[M]. Berlin, Germany:Springer Group, 2009:129-165. |
[4] |
BRAJDIC M, WALTHER K, EPPELT U. Analysis of laser drilled deep holes in stainless steel by superposed pulsed Nd:YAG laser radiation[J]. Optics and Lasers in Engineering, 2008, 46(9):648-655. |
[5] |
DAI G, LU J, NI X W, et al. Experiment of long pulse high energy laser drilling on silica glass[J]. Optics and Precision Engineering, 2011, 19(2):380-386. |
[6] |
SOLOKHIN S A, SIROTKIN A A, GARNOV S. Diode pumped Nd:YAG laser with active Q-switching and mode locking for hole drilling[J]. Laser Physics, 2011, 21(6):1145-1149. |
[7] |
LEHANE C, KWOK H S. Enhanced drilling using a dual-pulse Nd:YAG laser[J]. Applied Physics, 2001, A73(1):45-48. |
[8] |
WANG X D, MICHALOWSKI A, DAUSINGER F, et al. Double-pulse technique for short pulse laser drilling[J]. Laser Technology, 2009, 33(3):283-286 (in Chinese). |
[9] |
WANG X. Ablation mechanisms of double nanosecond pulses laser drilling[C]//Photonics and Optoelectronics (SOPO) 2012 Symposium. New York, USA:IEEE, 2012:1-2. |
[10] |
WALTHER K, BRAJDIC M, WAWERS W.Tailored light 2[M]. Berlin, Germany:Springer Group, 2011:365-393. |
[11] |
WALTHER K, BRAJDIC M, KREUTZ E W. Enhanced processing speed in laser drilling of stainless steel by spatially and temporally superposed pulsed Nd:YAG laser radiation[J]. The International Journal of Advanced Manufacturing Technology, 2008, 35(9/10):895-899. |
[12] |
ARRIZUBIETA I, LAMIKIZ A, MARTNEZ S, et al. Internal characterization and hole formation mechanism in the laser percussion drilling process[J]. International Journal of Machine Tools and Manufacture, 2013, 75(12):55-62. |