[1] BAO X Y, CHEN L. Recent progress in optical fiber sensors based on Brillouin scattering at university of Ottawa[J]. Photonic Sensors, 2011, 1(2): 102-117.
[2] GALINDEZ-JAMIOY C A, L'OPEZ-HIGUERA J M. Brillouin distributed fiber sensors an overview and applications[J]. Journal of Sensors, 2012,2012:204121.
[3] SONG M P. The technique of Brillouin scattering-distributed optical fiber sensing based on microwave electrooptical modulation[J]. Acta Optica Sinaca, 2004, 24(8):1111-1114(in Chinese).
[4] CHEN F C, HU J C, ZHANG C T, et al. Distributed Brillouin optical fiber temperature sensor based on high frequency microwave technology[J]. Chinese Journal of Lsaers, 2012, 39(6): 1-5(in Chinese).
[5] URRICELQUI J, ZORNOZA A, SAGUES M, et al. Dynamic BOTDA measurements based on Brillouin phase-shift and RF demodulation[J].Optics Express,2012, 20(24): 26942-26949.
[6] JIANG S, CHANG J, ZHANG S, et al. A method for eliminating the impact of microwave sweeper power fluctuation in BOTDA system[J]. Photonics Sensors, 2014,4(1): 86-91.
[7] LI X,ZHAO S H,LI Y J, et al. An automatic bias control method applied to all bias points of electro-optic modulator[J]. Laser Technology, 2013, 37(4): 473-477(in Chinese).
[8] REN T T,XU C,ZHENG S L, et al. Effect of dither tone-based electro-optic modulator bias control on radio-frequency signal[J]. Laser Journal, 2013, 37(6): 773-776(in Chinese).
[9] HU J H, ZHANG D W, TAO C X, et al. Research and development of distributed optic fiber sensors based on Brillouin scattering[J]. Laser Journal, 2011, 32(6):1-3(in Chinese).
[10] HUANG M S, ZENG L, TAO B Q, et al. Parameter calculation of distributed optical fiber strain sensor based on Brillouin scattering[J]. Acta Aeronautica et Astronautica Sinica, 1999, 20(2): 137-140(in Chinese).
[11] DONG J J, ZHANG X Q. Design of broadband frequency-sweep signal generator based on FPGA and AD9854[J]. Foreign Electronic Measurement Technology, 2013, 32(11): 65-69(in Chinese).