[1] FANG Zh,QIU Y Ch,LI Sh. The development of optical current transducers[J].Electric Power Construction,2002,23(12):42-44(in Chinese).
[2] BRIAN C. Optical fiber sensor technologies: opportunities and-perhaps-pitfalls[J].Journal of Lightwave Technology,2004,22(1):38-50.
[3] ZIEGLER S, WOODWARD R C, IU H H Ch. Current sensing techniques: a review[J].IEEE Seneors Journal,2009,4(9):354-376.
[4] BOHNERT K, GABUS P, KOSTOVIC J, et al. Optical fiber sensors for the electric power industry[J].Optics and Lasers in Engineering,2005,43(3/5):511-526.
[5] GAO P,MA J H,YANG N, et al. Electronic transducer technology and its current development[J].Southern Power System Technology,2009,3(3):39-42(in Chinese).
[6] LEE B H, ROH S Y, PARK J H. Current status of micro- and nano-structured optical fiber sensors[J]. Optical Fiber Technology,2009,15(3):209-221.
[7] BRGIDA A C S, NASCIMENTO I M, CHESINI G, et al. Fabrication of a spun elliptically birefringent photonic crystal fiber and its characterization as an electrical current sensor[J].Proceedings of the SPIE,2003,8794:F1-F4.
[8] MICHIE A, CANNING J, BASSET I, et al. Spun elliptically birefringent photonic crystal fibre for current sensing[J].Measurement Science and Technology,2007,18(10):3070-3074.
[9] XIONG X M,FANG J C,WANG L. Research on dual optical path all-fiber current transformer[J]. Laser Infrared,2013,43(5):536-539(in Chinese).
[10] NI Zh B,SONG L K,LIU J P, et al. Measurement of birefringence of a single axis crystal varying with temperature based on double light paths[J]. Laser Technology,2007,31(4):358-363(in Chinese).
[11] LIANG Q T. Physical optics[M].3rd ed.Beijing:Publishing House of Electronics Industry,2007:57-59(in Chinese).
[12] KANG Ch, WANG Zh P, HUANG Z J, et al. Influence of reflection-induced retardance of non-polarizing beam splitter upon the polarization state of the output light of faraday mirror optical current transformer[J].Acat Optica Sinica,2006,26(12):1857-1860(in Chinese).
[13] ZHANG W, NING Y N, GRATTAN K T V, et al. Analysis of the effect of vibration-induced noise in different fibre leads used in an optical current-measurement system[J]. Sensors and Actuators,1997,A63(2):113-118.
[14] LIAO P,MO Sh W.1310nm/1550nm semiconductor laser power supply for the optic fiber measurement[J].Laser Technology,2013,37(4):541-546(in Chinese).
[15] IEC STANDARDS.IEC60044-8 instrument transformers-part 8:electronic current transformers[S].Geneva,Switzerland:Internation Electro Technical Commission,2002.
[16] TANG D D, ROSE A H, DAY G W, et al. Annealing of linear birefringence in single-mode fiber coils: application to optical fiber current sensors[J].Journal of Lightwave Technology,1991,8(9):1031-1037.