[1] JOLLIVET T, DARFEUILLE A, VERQUIN B, et al. Rapid manufacturing of polymer parts by selective laser sintering[J]. International Journal of Material Forming, 2009, 2(s1):697-700.
[2] KRUTH J P, LEVY G, KLOCKE F, et al. Consolidation phenomena in laser and power-bed based layered manufacturing[J]. Annals of the CIRP, 2007, 56(2): 730-759.
[3] DECKERS J, SHAHZAD K, VLEUGELS J, et al. Isostatic pressing assisted indirect selective laser sintering of alumia components[J]. Rapid Prototyping Journal, 2012, 18(5): 409-419.
[4] MA F K. Isostatic pressure technology[M]. Beijing: Metallurgy Industry Publishing Company, 1992: 105-126(in Chinese).
[5] SHAHZAD K, DECKERS J, BOURY S, et al. Preparation and indirect selective laser sintering of alumina/PA microspheres[J].Ceramics International, 2012, 38: 1241-1247.
[6] YAN C Z, SHI Y S, YANG J S, et al. Preparation and selective laser sintering of nylon-coated metal powder for the indirect SLS process[J].Rapid Prototyping Journal, 2009, 15(5):355-360.
[7] LU Zh L, LIU J H, SHI Y S. Relative density of selective laser sintering AISI316L stainless steel products[J]. Materials Science and Engineering of Powder Metallurgy, 2011, 16(4): 505-510 (in Chinese).
[8] LU Zh L, SHI Y S, LIU J H, et al. Performance of AISI316L complicated components manufactured by laser forming[J]. Infrared and Laser Engineering, 2010, 39(3): 516-520 (in Chinese).
[9] SHI Y Sh, REN L H, WEI Q S, et al. Simulation of cold isostatic pressing of part by selective laser sintering[J]. Journal of Huazhong University of Science and Technology (Nature Science Edition), 2007, 35(12):91-94 (in Chinese).
[10] LIU J H, SHI Y S, CHEN K H, et al. Research on manufacturing Cu matrix Fe-Cu-Ni-C alloy composite parts by indirect selective laster sintering[J].The International Journal of Advanced Manufacturing Technology, 2007, 33(7/8):693-697.
[11] LIU J H. Investigation into manufacturing metal parts via indirect selective laser sintering[D]. Wuhan: Huazhong University of Science and Technology, 2006:52-78(in Chinese).
[12] HIBBITT D, KARLSSON B, SORENSEN P. ABAQUS theory manual[M].5th ed.Amsterdam, Holland:Elsevier Science Ltd, 1996:18.3.2.
[13] DU Y Y, SHI Y S, WEI Q S, et al. Simulation and experiment of cold isostatic pressing of stainless steel powder[J]. Journal of Materials Engineering, 2010(3):89-92(in Chinese).
[14] CHTOUROU H, GUILLOT M, GAKWAYA A. Modeling of the metal powder compaction process using the cap model. Part Ⅰ. Experimental material characterization and validation[J]. International Journal of Solids and Structure, 2002, 39(4): 1059-1075.
[15] JINKA A G K. A finite element prediction of densification kinectics during the hot isostatic pressing of metal powder compacts[J]. Journal of Materials Processing Technology, 1996, 57(3/4):382-392.