激光切割板材表面质量研究综述

鄢锉; 李力钧; 李娟; 谢小柱; 张屹; 鄢锉; 李力钧; 李娟; 谢小柱; 张屹

[1]

SCHREINER-MOHR U,DAUSINGER F,Hü GEL H.New aspects ofcutting with CO2 lasers [A].ICALEO [C].San Jose:LIA,1991.263～271.

[2]

KAEBERNICK H,BICLEANU D,BRANDT M.Theoretical and experimental investigation of pulsed laser cutting [J].Annals of the CIRP,1999,48(1):163～165.

[3]

陈继民,左铁钏.激光切割中入射角对切割质量的影响 [J].中国激光,2001,A28(11):1037～1040.

[4]

黄开金,谢长生,许德胜.空间曲率半径对三维物体激光切割质量的影响 [J].中国激光,2001,A28(5):471～475.

[5]

李祥友,曾晓雁,刘勇.激光精密切割不锈钢薄板的工艺研究 [J].中国激光,2001,A28(12):1125～1129.

[6]

RAJARAM N,SHEIKH-AHMAD J,CERAGHI S H.CO2 laser cutquality of 4130 steel [J].Int J Mach Tools Manufact,2003,43(4):351～358.

[7]

ARATA Y,MARUO H,MIYAMOTO I.Dynamic behavior in laser gas cutting of mild steel [J].Trans JWRI,1979,8(2):15～26.

[8]

PIETRO P D,YAO Y L.An investigation into characterization and optimizing laser cutting qulity [J].Int J Mach Tools Manufact,1994,34(2):225～243.

[9]

JORGENSEN H,OLSEN F O.Process monitoring during CO2 laser cutting [J].SPIE,1991,1412:198～208.

[10]

SCHULZ W,KOSTRYKIN V,NISSEN M.Dynamics of ripple formation and melt flow in laser beam cutting [J].J Phys,1999,D32:1219～1228.

[11]

MICHEL J,SCHULZ W,NISSEN M.Advances in dynamical modeling on-line monitoring and control in high quality cutting [J].SPIE,2001,4407:112～122.

[12]

POPRAWE R.Modeling,monitoring and control in high quality laser cutting [J].Annals of the CIRP,2001,50(1):137～140.

[13]

黄开金,谢长生,邵可然.管材激光切割过程和条纹形成模型的研究 [J].应用激光,2001,21(1):31～34.

[14]

CHEN S L,STEEN W M.The theoretical investigation of gas assisted laser cutting [A].ICALEO [C].San Jose:LIA,1991.221～227.

[15]

KAEBERNICK H,JEROMIN A,MATHEW P.Adaptive control forlaser cutting using frequency analysis [J].Annals of the CIRP,1998,47(1):137～139.

[16]

ABDULHAD E,PELLETIER J M,LAMBERTIN M.Development in laser cutting of steel:analytical modeling and experimental validation of the metallurgical effects [J].SPIE,1997,3097:17～25.

[17]

OLSEN F O,EMMET A,BERGMANN H W.Contribution to oxygen assisted CO2 laser cutting [A].Proc 6th Int Conf Lasers in manufacturing [C].Birmingham:IFS,1989.67～79.

[18]

NEIL W O,STEEN W M.A three-dimensional analysis of gas entrainment operating during the laser-cutting process [J].J Phys,1995,D28(1):12～18.

[19]

王昆林,藏东红,朱允明.钛合金的激光切割 [J].稀有金属材料与工程,1994,23(1):62～65.

[20]

BARTAL N L,BERGMAN H W,Influence of processing speed on cut quality in laser beam gas cutting of copper [J].SPIE,1997,3097:70～77.

[21]

KANEMATSU W,SAKAI S.Laser machining of hot-pressed silicon nitride [J].Yogyo Kyokai Shi,1986,94(7):671～675.

[22]

洪蕾,李力钧.工程陶瓷激光切割工艺的试验研究 [J].中国机械工程,2000,11(12):1410～1413.

[23]

WEBBER T.Laser cutting of galvanized steel:CO2 vs Nd:YAG[A].ICALEO [C].San Jose:LIA,1991.273～279.

[24]

ILIO A D,TAGLIAFEBRI V.Laser cutting of aramid FRP [A].Proceedings of LAMP [C].Osaka:Sariw,1987.291～295.

[25]

SEMRAU H,NSHOF H K T.Laser gas cutting using Laval nozzle [A].ICALEO [C].Santa Clara:LIA,1988.157～170.

[26]

黄开金,谢长生,曾大文.激光切割1Cr18Ni9Ti不锈钢管材挂渣和飞渣的研究 [J].应用激光,2001,21(3):159～163.

[27]

ATANASOV P A.Some aspects of high pressure N2 assisted CO2 laser cutting of metals [J].SPIE,1992,1810:628～631.

[28]

CHENG H,NEIL W O.The effects of power rippling on CO2 laser cutting [J].Opt Technol,1997,29(3):125～134.