激光熔覆专用铁基合金粉末的研究进展

李胜; 胡乾午; 曾晓雁; 李胜; 胡乾午; 曾晓雁

[1]

宋武林.激光熔覆层开裂行为及抑制方法的研究[D].武汉:华中理工大学,1996.9～90.

[2]

祝柏林,胡木林,陈俐 et al.激光熔覆层开裂问题的研究现状[J].金属热处理,2000(7):1～4.

[3]

周卓华.铸造镍基高温合金激光熔凝、熔覆的开裂行为研究[D].武汉:华中理工大学,1996.17～35.

[4]

HERNANDEZ J,VANNES A.Laser surface cladding and residual stress[A].Proceedings of the 3rd International Conference on Lasers in Manufactuing[C].Paris:Springer-Verlag,1986.181～190.

[5]

王新林,漆海滨,石世宏.激光熔覆石化阀门密封面熔覆层裂纹控制的研究[J].激光技术,2002,26(5):359～363.

[6]

SONG W L,ZHU B D,CUI K.Effect of Ni content on cracking susceptibility and microstructure of laser-clad Fe-Cr-Ni-B-Si alloy[J].Surface and Coatings Technology,1996,80(3):279～282.

[7]

SONG W L,ECHIGOYA J,ZHU B D et al.Effects of Co on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer[J].Surface and Coatings Technology,2001,138(2～3):291～295.

[8]

关振中.激光加工工艺手册[M].北京:中国计量出版社,1998.255～306.

[9]

吴萍,周昌轵,唐西南.激光合金化熔覆制备耐磨陶瓷梯度涂层[J].金属学报,1994,30(11):B508～B512.

[10]

张迪,单际国,任家烈.高能束熔覆技术的研究现状及发展趋势[J].激光技术,2001,25(1):39～42.

[11]

FRENK A,MARSDEN C F,WAGNIERE J D et al.Influence of an intermediate layer on the residual stress layer in a laser clad[J].Surface and Coatings Technology,1991,45(3):435～441.

[12]

SONG W L,ZHU B D,XIE Ch Sh et al.Cracking susceptibility of a laser-clad layer as related to the melting properties of the cladding alloy[J].Surface and Coatings Technology,1999,115(2):270～272.

[13]

李春彦,张松,康煜平 et al.综述激光熔覆材料的若干问题[J].激光杂志,2002,22(3):5～9.

[14]

张三川,姚建铨,梁二军.激光熔覆进展与熔覆合金设计[J].激光技术,2002,26(3):204～207.

[15]

NAGARATHNAM K,KOMVOPOULOS K.Microstrctural and microhardness characteristics of laser-sysnthesized Fe-Cr-W-C coatings[J].Metallurgical and Materials Trans,1995,A26(8):2131～2139.

[16]

谭文,刘文今,贾俊红.激光熔覆Fe-C-Si-B的研究[J].金属热处理,2000(1):13～15.

[17]

陈俐,谢长生,胡木林 et al.激光熔覆用铁基合金工艺性研究[J].焊接技术,2001,25(5):343～346.

[18]

贾俊红,钟敏霖,刘文今 et al.Ti对Fe-C合金表面激光熔覆复合材料层组织和性能的影响[J].应用激光,2000,20(4):145～148.

[19]

赵海云.铁基激光熔覆合金设计及微观组织与性能研究[D].北京:中国科学院力学研究所,2001.35～73.

[20]

ZHANG Q M,HE J J,LIU W J et al.Microstructures and properties of (2.4%Zr+1.2%Ti+15%WC)/FeCSiB layers produced by laser cladding[A].Lasers in Materials Processing and Manufacturing[C].Shanghai:The International Society for Optical Engineering,2002.253～258.

[21]

武晓雷,洪友士.激光熔覆铁基大厚度非晶合金表层的研究[J].材料热处理学报,2001,22(1):51～54.

[22]

ZHANG Q M,HE J J,LIU W J et al.Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding[J].Surface and Coatings Technology,2003,162(2～3):140～146.