[1] 孙承纬. 激光辐照效应[M]. 北京: 国防工业出版社, 2002: 1-50.SUN Ch W. Laser irradiation effect[M]. Beijing: National Defense Industry Press, 2002: 1-50(in Chinese).
[2] WANG P, ZHANG Z, HAO B, et al. Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions[J]. Composites Part, 2023, B262: 110827.
[3] WAN H L, LIN J P, MIN J Y. Effect of laser ablation treatment on corrosion resistance of adhesive-bonded Al alloy joints[J]. Surface and Coatings Technology, 2018, 345: 13-21. doi: 10.1016/j.surfcoat.2018.03.087
[4] WANG Y, ZHANG M Y, DONG Y H, et al. Morphology modeling and validation in nanosecond pulsed laser ablation of metallic materials[J]. Precision Engineering, 2023, 79: 34-42. doi: 10.1016/j.precisioneng.2022.08.010
[5] DOU H Q, YAO C Zh, LIU H, et al. Femtosecond laser ablation of Al-Mg alloy in vacuum and air[J]. Applied Surface Science, 2018, 447: 388-392. doi: 10.1016/j.apsusc.2018.04.003
[6] LI P F, WANG Y H, LI L L, et al. Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy[J]. Journal of Materials Research and Technology, 2023, 23: 6101-6114. doi: 10.1016/j.jmrt.2023.02.209
[7] YIN J H, CAO Y Zh, CUI Y W, et al. Nd ∶YAG laser ablation of aluminum alloy 6061 before and after silicon dioxide coating[J]. Journal of Alloys and Compounds, 2021, 877: 160329. doi: 10.1016/j.jallcom.2021.160329
[8] 焦路光, 赵国民, 江厚满. 切向气流作用下激光对典型金属靶的辐照效应[J]. 中国光学, 2011, 4(1): 77-81.JIAO L G, ZHAO G M, JIANG H M. Irradiation effects of laser on typical metal targets under tangential airflow[J]. Chinese Optics, 2011, 4(1): 77-81(in Chinese).
[9] 张潇允, 张巍, 夏盛强, 等. 高功率激光辐照CFRP的温度场和应力场的数值分析[J]. 激光技术, 2021, 45(5): 636-641.ZHANG X Y, ZHANG W, XIA Sh Q, et al. Study on numerical analysis of temperature field and stress field of carbon fiber reinforced polymers irradiated by high power laser[J]. Laser Technology, 2021, 45(5): 636-641(in Chinese).
[10] XING X D, MA T, WANG R X, et al. Dynamic rupture of metal sheet subjected to laser irradiation and tangential subsonic airflow[J]. Theoretical & Applied Mechanics Letters, 2018, 8(4): 272-276. doi: 10.3969/j.issn.2095-0349.2018.04.008
[11] WANG J, MA Y, LIU Y, et al. Experimental investigation on laser ablation of C/SiC composites subjected to supersonic airflow[J]. Optics & Laser Technology, 2019, 113: 399-406. doi: 10.5768/JAO201940.0301007
[12] 伍俊英, 杨利军, 吴宝, 等. 强激光烧蚀铝靶实验及数值模拟[J]. 北京理工大学学报, 2018, 38(10): 1018-1024.WU J Y, YANG L J, WU B, et al. Experiment and numerical simulation of ablation on aluminum target with high-intensity laser[J]. Transactions of Beijing institute of Technology, 2018, 38(10): 1018-1024(in Chinese).
[13] BAEK W K, LEE K C, AN S I, et al. Melt-through characteristics in continuous beam irradiation of flying metal samples in flow speeds up to 85 m/s[J]. Optics & Laser Technology, 2013, 45: 250-255.
[14] 张萌, 方英武, 张广鹏. 纳秒脉冲激光辐照铝靶碎片动态响应的仿真研究[J]. 激光技术, 2023, 47(4): 541-546.ZHANG M, FANG Y W, ZHANG G P. Numerical simulation of dynamic response for aluminum target debris irradiated by nanosecond pulse laser[J]. Laser Technology, 2023, 47(4): 541-546(in Chinese).
[15] ZHAO W N, MA T, SONG H W, et al. Effects of tangential supersonic airflow on the laser ablation of laminated CFRP[J]. Journal of Materials Research and Technology, 2021, 14: 1985-1997. doi: 10.1016/j.jmrt.2021.07.101
[16] 张永强, 陶彦辉, 张黎, 等. 激光辐照超音速气流下TA15钛合金和LY12铝合金的热响应[J]. 强激光与粒子束, 2014, 26(8): 081005. doi: 10.11884/HPLPB201426.081005ZHANG Y Q, TAO Y H, ZHANG L, et al. Thermal response of TA15 titanium alloy and LY12 Aluminium alloy irradiated by laser under supersonic tangential flow[J]. High Power Laser and Particle Beams, 2014, 26(8): 081005 (in Chinese). doi: 10.11884/HPLPB201426.081005
[17] HARRACH R J. Analytical solutions for laser heating and burnthrough of opaque solid slabs[J]. Journal of Applied Physics, 1977, 48(6): 2370-2383. doi: 10.1063/1.323999
[18] BOLEY C D, CUTTER K P, FOCHS S N, et al. Interaction of a high-power laser beam with metal sheets[J]. Journal of Applied Physics, 2010, 107(4): 043106. doi: 10.1063/1.3284204
[19] 梅丽芳, 秦建红, 严东兵. 活性激光焊接304不锈钢温度场的数值与试验研究[J]. 激光技术, 2020, 44(4): 492-496.MEI L F, QIN J H, YAN D B. Numerical and experimental study on temperature field of activated laser welding 304 stainless steel[J]. Laser Technology, 2020, 44(4): 492-496(in Chinese).
[20] 王伟平, 刘仓理, 王春彦, 等. 切向气流对激光加热材料的影响[J]. 强激光与粒子束, 1996, 8(3): 373-377.WANG W P, LIU C L, WANG Ch Y, et al. Tangential airflow influence on laser heating materials[J]. High Power Laser and Particle Beams, 1996, 8(3): 373-377(in Chinese).
[21] 张家雷, 谭福利, 刘仓理, 等. 激光熔蚀金属平板的三维有限体积法数值分析[J]. 强激光与粒子束, 2015, 27(8): 081002.ZHANG J L, TAN F L, LIU C L, et al. 3D finite volume method simulation on melt removal effects of metal plate under laser irradiation[J]. High Power Laser and Particle Beams, 2015, 27(8): 081002(in Chinese).