Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 31 Issue 5
May  2010
Article Contents
Turn off MathJax

Citation:

Approximate analytical solutions to rate equations ofmulti-position-pumped fiber lasers

  • Corresponding author: CHEN Jian-guo, optics_lab@163.com
  • Received Date: 2006-08-31
    Accepted Date: 2006-09-30
  • In order to analyze the characteristics of multi-position pumped fiber laser expediently,the predominant part of the re-emission was adopted to improve the solutions precise,and the rate equations describing the Yb-doped multi-position pumped fiber lasers were solved analytically.The solutions of the output power of the fiber lasers were got approximately.Comparing the analytical solutions and the numerical solutions,the result shows the difference between them is small than 5%.Based on the relationship between the position of the pump point and the utilization efficiency of pump light,the conclusion was drawn that pump sources should be set near the fiber ends.Simulating the distribution of pump light along the fiber of the two schemes(one-position-pump and multi-position-pump),the results show that for the multi-position-pump scheme,the distribution of pump power is relatively uniform along the fiber compared to that of the one-position-pump scheme.In other words,extra local temperature rise arising from the absorption of the external cald can be reduced in the multi-position-pump scheme,rendering it a better choice for the high power fiber lasers.
  • 加载中
  • [1]

    WEI W L,YAN P,OU P et al.Numerical analysis and experimental results of output characteristics for strongly pumped Yb3+dopeddouble-clad fiber laser[J].Optical Technique,2004,30(1):13~19(in Chinese).
    [2]

    LI C,SONG J.Diode pumped high power fiber lasers and applications[J].Proc SPIE,1999,3862:246~253.
    [3]

    OU P,YAN P,WEI W L et al.Side-pumpd Yb-doped double-clad fiber laser[J].Acta Optic Sinica,2004,24(9):1240~1244(in Chinese).
    [4]

    SONG L Y,GUO Y B,WANG L J et al.Research on Yb-doped double clad fiber laser[J].Laser Journal,2003,24(2):8~10(in Chinese).
    [5]

    CHEN J X,SUI Zh,CHEN F Sh et al.Thermal effect of Yb3+-doped double clad fiber laser[J].Laser Technology,2006,30(3):268~270(in Chinese).
    [6]

    ZHANG C W,XIANG Sh Q,WANG Ch A et al.Numerical analysis on spatial three position pumped Yb doped double cladding fiber laser[J].Acta Optic Sinica,2003,23(2):249~254(in Chinese).
    [7]

    CANNING J.Fiber lasers and related technonlogies[J].Optics and Lasers in Engineering,2006,44(7):647~676.
    [8]

    XIA J Zh,QU R H,CAI H W et al.Studies on relaxation oscillation characteristics of fiber lasers[J].Chinese Journal of Lasers,2004,31(7):807~810(in Chinese).
    [9]

    KELSON I,HARDY A A.Strongly pumped fiber lasers[J].IEEE J Q E,1998,34(9):1570~1577.
    [10]

    XIAO L M,YAN P,GONG M L et al.An approximate analytic solution of strongly pumped Yb-doped double clad fiber lasers without neglecting the scattering loss[J].Opt Commun,2004,230:401~410.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3146) PDF downloads(447) Cited by()

Proportional views

Approximate analytical solutions to rate equations ofmulti-position-pumped fiber lasers

    Corresponding author: CHEN Jian-guo, optics_lab@163.com
  • 1. School of Electronics and Information Engineering, Sichuan University, Chengdu 610064, China;
  • 2. Southwest Institute of Technical Physics, Chengdu 610041, China

Abstract: In order to analyze the characteristics of multi-position pumped fiber laser expediently,the predominant part of the re-emission was adopted to improve the solutions precise,and the rate equations describing the Yb-doped multi-position pumped fiber lasers were solved analytically.The solutions of the output power of the fiber lasers were got approximately.Comparing the analytical solutions and the numerical solutions,the result shows the difference between them is small than 5%.Based on the relationship between the position of the pump point and the utilization efficiency of pump light,the conclusion was drawn that pump sources should be set near the fiber ends.Simulating the distribution of pump light along the fiber of the two schemes(one-position-pump and multi-position-pump),the results show that for the multi-position-pump scheme,the distribution of pump power is relatively uniform along the fiber compared to that of the one-position-pump scheme.In other words,extra local temperature rise arising from the absorption of the external cald can be reduced in the multi-position-pump scheme,rendering it a better choice for the high power fiber lasers.

Reference (10)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return