Numerical simulation of 3-D nondestructive marking based on laser shock wave
-
1.
Jiangsu Provincial Key Laboratory for Science and Technology of Photon Manufacturing, Jiangsu University, Zhenjiang 212013, China
-
Corresponding author:
ZHANG Yong-kang, ykzhang@ujs.edu.cn
;
-
Received Date:
2006-11-22
Accepted Date:
2007-04-12
-
Abstract
In order to study the distribution of residual stress and distortion,a FEM model of marking by means of laser shock waves was established based on ANSYS/LS-DYNA.By loading the shock waves induced by laser,a numerical simulation of marking was carried out.The simulated results showed that the mesh of marking area acted by laser shock waves formed a crater with dimension similar to the diameter of the load,and its residual stress was compressive stress.As the amount of the deformation increased gradually,the residual compressive stress in the center of marking area reached the maximum;the residual compressive stress along the thickness of the material declined as the thickness increased,and the loading effect was not obvious in the depth of 1mm~1.4mm.The results are applicable in theoretical analysis and experimental research of residual stress field of 3-D nondestructive marking based on laser shock wave.
-
-
References
|
[1]
|
BRENT D C,LOYDA H L,FRITZ H.Identification marking by means of laser peening:USA,Wo0161619[P].2001-08-23. |
|
[2]
|
SHANG X J,SU J Y.ANSYS/LS-DYNA dynamic analysis methodsand its application[M].Beijing:China Water Conservancy Press,2005:14-18(in Chinese). |
|
[3]
|
DU J J,ZHOU J Z,YANG Ch J,et al.Application of ABAQUS in simulation process of laser peen forming of sheet metal[J].Applied Laser,2005,25(6):371-373(in Chinese). |
|
[4]
|
PEYRE P,FABBRO R.Laser shock processing:a review of the physics and applications[J].Optical and Quantum Electronics,1995,27(12):1213-1229. |
|
[5]
|
ZHOU J Z,ZHANG Y K,ZHOU M,et al.Theoretical analysis on deformation of sheet metal under one laser shot loading[J].Chinese Journal of Lasers,2005,32(1):135-138(in Chinese). |
|
[6]
|
ZHANG H,TANG Y X,YU C Y,et al.The effects of laser shock processing on the fatigue properties of 2024 aluminum alloy[J].Transactions of Metal Heat Treatment,1999,20(2):57-62(in Chinese). |
|
[7]
|
REN N F,YANG J C,CAI L,et al.Effects of laser shocking on the mechanical properties of metals[J].Laser Technology,1998,22(4):235-238(in Chinese). |
|
[8]
|
PEYRE P,FABBRO R,BERTHE L,et al.Laser shock processing of materials:Physical processes involved and examples of applications[J].Journal of Laser Applications,1996,16(8):135-141. |
|
[9]
|
ZHANG Y K,YIN S M,ZHOU J Z,et al.Method and device of 3-D nondestructive and high-anti-counterfeiting markings by laser shock wave:China,200510037968.2[P].2005-03-08(in Chinese). |
|
[10]
|
LU J Zh,ZHANG Y K,KONG D J,et al.Study on residual stresses distribution and fabricating of nondestructive laser marking based on liquid crystal mask[C]//Proceedings of the 7th ICFDM2006 International Conference on Frontiers of Design and Manufacturing.Guangzhou:Guangdong Univervisty of Technology Press,2006:515-518(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: