Study of transmission characteristics of two kinds of deformed dual-ridge waveguide
-
1.
Key Laboratory of Opto-Electronic Technology and Intelligent Control of Ministry of Education, Lanzhou Jiaotong University, Lanzhou 730070, China;
-
2.
School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China;
-
3.
School of Software Engineering, Pingdingshan University, Pingdingshan 467000, China
-
Corresponding author:
LU Mai, emfmlu@gmail.com
;
-
Received Date:
2008-05-08
Accepted Date:
2008-06-30
-
Abstract
In order to find a symmetrical dual-ridged waveguide with optimal transmission characteristics,two novel dual-ridged waveguides with circle and ellipse ridges respectively were put forward.The influence of both the deformed dual-ridged waveguides on the transmission characteristics of the waveguide was analyzed by means of finite element method.The cut off wavelength and single-mode bandwidth were calculated for different ridge dimensions.The field patterns of dominant mode and the curve for the effect of deformation on the cutoff wavelength and brand width were drawn.Finally,the relationship between the transmission characteristics and the dimension of the ridges was analyzed.It is shown that these results can provide valuable reference of application and study of the deformed dual-ridge waveguides and provide instructions for miniaturization of ridged waveguide apparatus.
-
-
References
|
[1]
|
LU M,LEONARD P J.Dependence of ridge position on the cutoff wavelength of the dominant mode in single ridge waveguides[J].Microwave and Optical Technology Letter,2002,55(34):374-377. |
|
[2]
|
McKAY M,HELSZAJN J.Voltage-current definition of impendence of single-ridge waveguide[J].IEEE Microwave and Guided Wave Letters,1999,9(2):66-68. |
|
[3]
|
QIU D,KLYMYSHYN D M,PRAMANICK P.Ridged waveguide st-ructures with improved fundanmental mode cutoff wavelength and bandwidth characteristics[J].Internatinal Journal of RF Microwave Computer-Aided Engineering,2002,12(2):190-197. |
|
[4]
|
LU M,LEONARD P J.Design of trapezoidal-ridge waveguide by finite-elementmethod[J].Microwaves Antennas and Propagation Proceedings,2004,151(3):205-211. |
|
[5]
|
ZHU M Z,LIANG Ch H.A MoM calculation of the lowest cutoff frequencies of uniform waveguides by conformal mapping[J].Journal of Xidian University,2006,33(5):709-711(in Chinese). |
|
[6]
|
BU A T.Method & its new development[J].Journal of Xidian University,2001,28(1):3-5(in Chinese). |
|
[7]
|
DENG S F,YANG X Q,CHENG Y Zh.Ridged waveguides eigenvalue analysis basedon finite element method[J].Electronic Warfare Technology,2005,20(1):43-46(in Chinese). |
|
[8]
|
ZHANG X J,SONG W M.Characteristic calculation of unsymmetrical ridged waveguide[J].Chinese Journal of Radio Science,2007,22(5):825-828(in Chinese). |
|
[9]
|
JARVIS D A,RAO T C.Design of double-ridged rectangularwaveguide of arbitrary aspect ratio and ridge height[J].IEEE Proceedings-Microwaves Antennas and Propagation,2000,147(1):31-34. |
|
[10]
|
RONG Y,ZAKI K A.Characteristics of generalized rectangular and circular ridge waveguides[J].Microwave Theory and Techniques,2000,48(2):258-265. |
|
[11]
|
LI Y,LU M,CHEN X Q.Research of the cutoff characteristic of the dominant mode in ridge-trough waveguides[J].Laser Technology,2007,31(4):442-444(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: