Review of hydroxyapatite coating prepared by laser cladding

ZHAO Ya-fan; CHEN Chuan-zhong

Volume 30 Issue 6

Sep. 2013

Article Contents

Turn off MathJax

Article Navigation > LASER TECHNOLOGY > 2006 > 30(6): 614-617

Citation:

Review of hydroxyapatite coating prepared by laser cladding

1.
School of Materials Science and Engineering, Shandong University, Ji'nan 250061, China;
2.
Shandong Architecture Engineering Institute, Ji'nan 250014, China

Received Date: 2005-06-08
Accepted Date: 2005-10-13

Abstract

Hydroxyapatite(HA) is one of bioactive ceramics with best bioactivity at present.The techniques for producing its film have become one of the hot points in the material research.As a new technique for changing the surface properties,laser cladding shows the unique advantages for producing HA bioceramic coatings.The quality of the coating is much better than that of the coating produced by other techniques.The characteristics of microstructure and properties of the coating by laser cladding and their influencing factors are reviewed.The effects on the qualities of the coating of laser parameters,reactant composition,rare earth element and gradient coating are analyzed in detail.The future application trend is also prospected.
- materials,
- HA coating,
- microstructure,
- properties,
- influencing factors

References

[1]	CHOU L,BANG Y,CHANG X L.Plasma-sprayed zirconia bond coat as an intermediate layer for hydroxyapatite coating on titanium alloy substrate[J].Journal of Materials Science:Materials in Medicine,2002,13 (16):589～595.
[2]	YAN L L,LENG Y,CHEN J Y.Torsional fatigue resistance of plasma sprayed HA coating on Ti-6Al-4V[J].Journal of Materials Science:Materials in Medicine,2003,14(4):291～295.
[3]	EKTESSABI A M,HAMDI M.Characterization of calcium phosphate bioceramic films using ion beam analysis techniques[J].Surface and Coatings Technology,2002,153 (12):10～15.
[4]	OHTSUKA Y,MATUBARA C,CHIDA N et al.Formation of hydroxyapatite coating on pure titanium substrates by ion beam dynamic mixing[J].Surface and Coatings Technology,1994,65 (18):224～228.
[5]	MASODA Y,MATUBARA K,SAKKA S.Aynthesis of hydroxyapatite from metal alkoxides through sol-gel technique[J].Journal of the Ceramic Society of Japan,1990,98(12):84～91.
[6]	NIE Y,LEYLAND A,MATTHEWS A.Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micri-arc oxidation and electrophoresis[J].Surface and Coatings Technology,2000,12 (3):407～414.
[7]	LI Y P,LI Sh T,ZHU R F et al.Formation of ultrafine particles in heat treated plasma-sprayed hydroxyapatite coatings[J].Surface and Coatings Technology,2003,165 (1):65～70.
[8]	SUN L M,WANG L,DU F et al.Phase,structural and microstructural investigations of plasma sprayed hydroxyapatite coatings[J].Materials Science and Engineering,2003,360(11):70～84.
[9]	CHEN Ch Zh,WANG D G,BAO Q H et al.Microstructure of laser cladding HA bioceramic gradient coatings[J].Chinese Journal of Lasers,2004,31 (8):22～27 (in Chinese).
[10]	DE M,MUL K,VEAM J L et al.Micro-Raman line broadening in synthetic carbonated hydroxyapatite[J].Dental Research,1986,65(3):437～440.
[11]	KHOR K A,VREELING A,DONG Z L et al.Laser treatment of plasma sprayed HA coatings[J].Materials Science and Engineering,1999,A266(30):1～7.
[12]	ZHANG Y P,GAO J Ch,CHEN M F et al.The effect of laser irrediation on microstructure of HAP bioceramic[J].Material Engineering,1996,11 (6):21～23(in Chinese).
[13]	ZHANG Y P,GAO J Ch,WEN J.Preparation of composing bioceramic layer on titanium alloy by laser surface cladding[J].Chinese Journal of Materials Research,1998,12 (4):423～426 (in Chinese).
[14]	DAI C Y,ZHANG Y P,GAO J Ch et al.Technology and interfacial research of bioceramic coating[J].Journal of Materials,2003,17(5):45～47(in Chinese).
[15]	CHEN Ch Zh,WANG D G,BAO Q H et al.Composition and structures of laser synthesizing calcium phosphorous bioceramic coatings on the surface of titanium[J].Biological Orthopaedics Materials and Clinical Application,2003,16 (1):51～54(in Chinese).
[16]	ARITA H,CASTANO V M.Synthesis and processing of hydroxyapatite ceramic tapes with controlled porosity[J].Mater Sci Lett,1995,22(6):19～23.
[17]	ZHANG Y P,GAO J Ch,CHEN M F.Thermodynamic and dynamics of laser synthesizing HA bioceramic coating[J].Functional Materials,1998,29(6):635～638(in Chinese).
[18]	WATARI F.Compositional and morphological imaging of CO2 laser irradiated human teeth by low vacuum SEM[J].J Mater Sci,2001,12(3):189～194.
[19]	NELEA V,PELLETIER H,ILIESCU M et al.Calcium phosphate thin film processing by pulsed laser deposition and institution assisted ultraviolet pulsed laser deposition[J].Journal of Materials Science:Materials in Medicine,2002,13(12):1167～1173.
[20]	CHEN D Q,CHEN G.Practical earth chemistry for rare earth elements[M].Beijing:Metallurgical Industry Press,1990.171～172(in Chinese).
[21]	ZHANG Y P,GAO J Ch,WEN J.Effect of Y2O3 on bioceramic coating by laser cladding[J].Heat Treatment of Metals,1999,32(10):9～11 (in Chinese).
[22]	GAO J Ch,WANG Y.Effect of Y2O3 on in situ synthesis of HA[J].The Chinese Journal of Nonferrous Metals,2003,13 (3):675～679(in Chinese).
[23]	ZHANG Y P,GAO J Ch,WEN J.Effect of Y2O3 on the properties of laser clad bioceramic coatings[J].Chinese Journal of Materials Research,1998,12(1):96～99(in Chinese).
[24]	GAO J Ch,ZHANG Y P,WEN J.Effect of Y2O3 on the microstructure of laser clad bioceramic coatings[J].Rare Metal Materials and Engineering,1997,26(3):30～34(in Chinese).
[25]	ZHENG Ch Q,RAN J G.New-style inorganic materials[M].Beijing:Science Press,2003.182～189 (in Chinese).
[26]	SKRIPITZ R,ASPENBERG P.Tensile bond between bone and titanium:a reappraisal of osseointegration[J].Acta Orthop Scand,1998,69(3):315～319.
[27]	NSHIGUCHI S,KIM H M,KOKUBO T.The effect of heat treatment on bone-bonding ability of alkali-treated titanium[J].Biomaterias,1999,20(5):491～500.
[28]	XU Sh H,WANG Y J,LUO CH P.Progress in research on HAP bioactive ceramic coatings[J].Journal of Materials,2002,16(1):47～50.

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article views(2742) PDF downloads(337) Cited by()

Proportional views

Review of hydroxyapatite coating prepared by laser cladding

1. School of Materials Science and Engineering, Shandong University, Ji'nan 250061, China;

2. Shandong Architecture Engineering Institute, Ji'nan 250014, China

Received Date: 2005-06-08

Accepted Date: 2005-10-13

Available Online: 2006-11-25

Abstract: Hydroxyapatite(HA) is one of bioactive ceramics with best bioactivity at present.The techniques for producing its film have become one of the hot points in the material research.As a new technique for changing the surface properties,laser cladding shows the unique advantages for producing HA bioceramic coatings.The quality of the coating is much better than that of the coating produced by other techniques.The characteristics of microstructure and properties of the coating by laser cladding and their influencing factors are reviewed.The effects on the qualities of the coating of laser parameters,reactant composition,rare earth element and gradient coating are analyzed in detail.The future application trend is also prospected.

HTML

Reference (28)

[1]	CHOU L,BANG Y,CHANG X L.Plasma-sprayed zirconia bond coat as an intermediate layer for hydroxyapatite coating on titanium alloy substrate[J].Journal of Materials Science:Materials in Medicine,2002,13 (16):589～595.
[2]	YAN L L,LENG Y,CHEN J Y.Torsional fatigue resistance of plasma sprayed HA coating on Ti-6Al-4V[J].Journal of Materials Science:Materials in Medicine,2003,14(4):291～295.
[3]	EKTESSABI A M,HAMDI M.Characterization of calcium phosphate bioceramic films using ion beam analysis techniques[J].Surface and Coatings Technology,2002,153 (12):10～15.
[4]	OHTSUKA Y,MATUBARA C,CHIDA N et al.Formation of hydroxyapatite coating on pure titanium substrates by ion beam dynamic mixing[J].Surface and Coatings Technology,1994,65 (18):224～228.
[5]	MASODA Y,MATUBARA K,SAKKA S.Aynthesis of hydroxyapatite from metal alkoxides through sol-gel technique[J].Journal of the Ceramic Society of Japan,1990,98(12):84～91.
[6]	NIE Y,LEYLAND A,MATTHEWS A.Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micri-arc oxidation and electrophoresis[J].Surface and Coatings Technology,2000,12 (3):407～414.
[7]	LI Y P,LI Sh T,ZHU R F et al.Formation of ultrafine particles in heat treated plasma-sprayed hydroxyapatite coatings[J].Surface and Coatings Technology,2003,165 (1):65～70.
[8]	SUN L M,WANG L,DU F et al.Phase,structural and microstructural investigations of plasma sprayed hydroxyapatite coatings[J].Materials Science and Engineering,2003,360(11):70～84.
[9]	CHEN Ch Zh,WANG D G,BAO Q H et al.Microstructure of laser cladding HA bioceramic gradient coatings[J].Chinese Journal of Lasers,2004,31 (8):22～27 (in Chinese).
[10]	DE M,MUL K,VEAM J L et al.Micro-Raman line broadening in synthetic carbonated hydroxyapatite[J].Dental Research,1986,65(3):437～440.
[11]	KHOR K A,VREELING A,DONG Z L et al.Laser treatment of plasma sprayed HA coatings[J].Materials Science and Engineering,1999,A266(30):1～7.
[12]	ZHANG Y P,GAO J Ch,CHEN M F et al.The effect of laser irrediation on microstructure of HAP bioceramic[J].Material Engineering,1996,11 (6):21～23(in Chinese).
[13]	ZHANG Y P,GAO J Ch,WEN J.Preparation of composing bioceramic layer on titanium alloy by laser surface cladding[J].Chinese Journal of Materials Research,1998,12 (4):423～426 (in Chinese).
[14]	DAI C Y,ZHANG Y P,GAO J Ch et al.Technology and interfacial research of bioceramic coating[J].Journal of Materials,2003,17(5):45～47(in Chinese).
[15]	CHEN Ch Zh,WANG D G,BAO Q H et al.Composition and structures of laser synthesizing calcium phosphorous bioceramic coatings on the surface of titanium[J].Biological Orthopaedics Materials and Clinical Application,2003,16 (1):51～54(in Chinese).
[16]	ARITA H,CASTANO V M.Synthesis and processing of hydroxyapatite ceramic tapes with controlled porosity[J].Mater Sci Lett,1995,22(6):19～23.
[17]	ZHANG Y P,GAO J Ch,CHEN M F.Thermodynamic and dynamics of laser synthesizing HA bioceramic coating[J].Functional Materials,1998,29(6):635～638(in Chinese).
[18]	WATARI F.Compositional and morphological imaging of CO2 laser irradiated human teeth by low vacuum SEM[J].J Mater Sci,2001,12(3):189～194.
[19]	NELEA V,PELLETIER H,ILIESCU M et al.Calcium phosphate thin film processing by pulsed laser deposition and institution assisted ultraviolet pulsed laser deposition[J].Journal of Materials Science:Materials in Medicine,2002,13(12):1167～1173.
[20]	CHEN D Q,CHEN G.Practical earth chemistry for rare earth elements[M].Beijing:Metallurgical Industry Press,1990.171～172(in Chinese).
[21]	ZHANG Y P,GAO J Ch,WEN J.Effect of Y2O3 on bioceramic coating by laser cladding[J].Heat Treatment of Metals,1999,32(10):9～11 (in Chinese).
[22]	GAO J Ch,WANG Y.Effect of Y2O3 on in situ synthesis of HA[J].The Chinese Journal of Nonferrous Metals,2003,13 (3):675～679(in Chinese).
[23]	ZHANG Y P,GAO J Ch,WEN J.Effect of Y2O3 on the properties of laser clad bioceramic coatings[J].Chinese Journal of Materials Research,1998,12(1):96～99(in Chinese).
[24]	GAO J Ch,ZHANG Y P,WEN J.Effect of Y2O3 on the microstructure of laser clad bioceramic coatings[J].Rare Metal Materials and Engineering,1997,26(3):30～34(in Chinese).
[25]	ZHENG Ch Q,RAN J G.New-style inorganic materials[M].Beijing:Science Press,2003.182～189 (in Chinese).
[26]	SKRIPITZ R,ASPENBERG P.Tensile bond between bone and titanium:a reappraisal of osseointegration[J].Acta Orthop Scand,1998,69(3):315～319.
[27]	NSHIGUCHI S,KIM H M,KOKUBO T.The effect of heat treatment on bone-bonding ability of alkali-treated titanium[J].Biomaterias,1999,20(5):491～500.
[28]	XU Sh H,WANG Y J,LUO CH P.Progress in research on HAP bioactive ceramic coatings[J].Journal of Materials,2002,16(1):47～50.

Review of hydroxyapatite coating prepared by laser cladding

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views

Review of hydroxyapatite coating prepared by laser cladding

HTML

Catalog

Export File

Citation

Format

Content