The in-situ fabricating of the bioceramic coating by laser cladding
-
Received Date:
2003-12-17
Accepted Date:
2004-03-03
-
Abstract
The bioceramic coating is fabricaed by laser cladding directly processing the mixed power of CaHPO4·2H2O and CaCO3.It is shown that the microstructure of the coating is the granular HAP distributed in the ov erlapped club-shaped β-Ca2P2O7 and the main phases in the coating are β-Ca2P2O7 and Ca5(PO4)3(OH);there is the bonded structure of the extension growth on plane basis between the substrate and the cladding layer,typical cellular crystals in the middle of the molten layer and equiaxed crystals at the top of the cladding layer.The microstructure evolution is determined by the ratio of temperature gradient and solidification velocity(G/R) produced by laser cladding.
-
-
References
[1]
|
SARCZYK A S',B£ IAOSKRSKI J.Hardness and fracture toughness of dense calcium-phosphate-based materials[J].Journal of Materials Science:Materials in Medicine,1998,9:103~108. |
[2]
|
CHANG Ch K,HUANG J Q,XIA J Y et al.Study on crystallization kinetics of plasma sprayed hydroxyapatite coating[J]. International Ceramics,1999,25 (5):479~483. |
[3]
|
KATTO M,NAKAMURA M,TANAKA T et al.Hydroxyapatitecoatings using novel pulsed laser ablation methods[J].Surface and Coatings Technology,2003,169~170:712~715. |
[4]
|
WANG Ch X,CHEN Zh Q,WANG M.X-ray photoelectron spectroscopy analysis of ion beam sputter deposited calcium phosphate coating[J]. Journal of Materials Science Letters,2001,20(14):1277~1279. |
[5]
|
de SENA L,de ANDRADE M C,ROSSI A M et al.Hydroxyapatite deposition by electrophoresis on titanium sheets with different surface finishing[J]. Journal of Biomedical Materials Research,2002,60(1):1~7. |
[6]
|
CHEANQ P,KHOR K A.Thermal spraying of hydroxyapatite(HA) coatings:effects of powder feedstock[J].Journal of Materials Processing Technology,1995,48(1~4):429~436. |
[7]
|
LI J,FARTASH B.Hydroxyapatite-alumina composites and bone-bonding[J].Biomaterials,1995,15(5):417~422. |
[8]
|
天津化工研究院.无机盐工业手册[M].天津 :化学工业出版社,1996.724.
|
[9]
|
李士普,陈晓明.生物陶瓷[M].武汉 :武汉工业大学出版社,1989.86.
|
[10]
|
周尧和,胡壮麒,介万奇.凝固技术[M].北京:机械工业出版社,1998.155.
|
[11]
|
孙荣禄,郭立新,董尚利 et al.钛合金表面激光熔覆NiCrBSi-TiC复合涂层的组织研究[J].中国激光,2001,A28(3):275~278.
|
[12]
|
王存山,夏原良,李刚 et al.宽带激光熔覆Ni基合金涂层结合区组织结构[J].应用激光,2001,21(2):88~90.
|
-
-
Proportional views
-