Advanced Search

ISSN 1001-3806 CN 51-1125/TN Map

Volume 27 Issue 3
Sep.  2013
Article Contents
Turn off MathJax
Article Navigation >  LASER TECHNOLOGY  > 2003 >  27(3): 178-181

Citation:
shu

Steady-state conditions for oxygen assisted lasox laser cutting of thick plates

  • 1.

    National Laboratory of Laser Technology, School of Materials Science & Engineering, HUST, Wuhan, 430074

  • Received Date: 2002-01-15
    Accepted Date: 2002-08-23
  • The principles and characteristics for lasox laser cutting of thick plates are presented in this paper.The steady-state conditions for the cutting were analyzed.The finite element method was used to simulate the surface temperature field along the centerline position in the cutting process.Based on this result,cutting quality was evaluated by the function of beam diameter,cutting speed and incident power.The range of cutting speed was also predicted for 20mm thick plates.A cutting experiment was made and the results shown that 12mm and 20mm thick plates could be cut successfully by the method ,at the same time,a reasonable agreement between the numerical simulation and the experimental results was found.
  • 加载中
  • [1]

    Frank D J,Schulz D W. Welding Fesearch Abroad,1995,41:34～37.
    [2]

    Geiger M,Schuberth S,Hufless J. Welding in the World,1996,37 (1):5～11.
    [3]

    Neill W O,Gabzdyl J T,Stracey R. SectionB-ICALEO,1998:88～96.
    [4]

    Neill W O,Gabzdyl J T. Opt Lasers in Engng,2000,34:355～367.
    [5]

    Ivarson A,Powell J,Magnusson C.Welding in the World,1992,30(5/6):116～125.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
Get Citation
PDF
XML

Article views(2992) PDF downloads(444) Cited by()

Proportional views

Steady-state conditions for oxygen assisted lasox laser cutting of thick plates

  • 1. National Laboratory of Laser Technology, School of Materials Science & Engineering, HUST, Wuhan, 430074
  • Received Date: 2002-01-15
  • Accepted Date: 2002-08-23
  • Available Online: 2003-05-25

Abstract: The principles and characteristics for lasox laser cutting of thick plates are presented in this paper.The steady-state conditions for the cutting were analyzed.The finite element method was used to simulate the surface temperature field along the centerline position in the cutting process.Based on this result,cutting quality was evaluated by the function of beam diameter,cutting speed and incident power.The range of cutting speed was also predicted for 20mm thick plates.A cutting experiment was made and the results shown that 12mm and 20mm thick plates could be cut successfully by the method ,at the same time,a reasonable agreement between the numerical simulation and the experimental results was found.

    HTML

Reference (5)

Catalog

    Copyright © Laser Technology. 蜀ICP备10038222号-1

    Address：No. 7, Section 4, Renmin South Road, Chengdu, Sichuan Province, China Postal Code：610041  Telephone：028-68011091/68011046  Email： jgjs@vip.163.com,  jgjs@sina.com

    Supported by: Beijing Renhe Information Technology Co. Ltd  support: info@rhhz.net

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return