Optimum design of magnetic pulse compressors

Chen Kewen; Qiu Junlin

The structure volume and energy transfer effieiency are the main design considerations of magnetic pulse compressors (MPC).Based on them,the analyses and comparisons of two optimal designs are given in this paper. It is also found that both of the total volume and loss of mognetic cores arenearly minimized for a given overall compression ratio by coupling a sufficient number of stages, eachwith a compression ratio of 2.

1. Institute of Laser, HUST

Received Date: 1994-12-20

Available Online: 1996-03-25

Abstract: The structure volume and energy transfer effieiency are the main design considerations of magnetic pulse compressors (MPC).Based on them,the analyses and comparisons of two optimal designs are given in this paper. It is also found that both of the total volume and loss of mognetic cores arenearly minimized for a given overall compression ratio by coupling a sufficient number of stages, eachwith a compression ratio of 2.

HTML

Reference (10)

[1]	Sylvan A. Spiers G D. Johnstone A. rt al. Rev Sci Inarrum, 1990;61(7):1821
[2]	Hidekazu Hetaneke, Minoru Obare. Mesa Sci Technd, 1991:(2):42
[3]	Melville W S The use of saturable reactors as discharge devices for pulse generators. Proc IEE, Part 3(Ratio end Cammunication). London. England. 1951;98(53):185
[4]	Birx b L, Lauer E J. Reginato L L et al. Basic principles governing the design of magnetic switches. Lawrence Livermore Laboratory Report. UCID-18831, Livetmore, California, U S A, 1980
[5]	Smith G H. Herlxri L. fhmamic magnetization of metallic glasses. nigest of Technical Papers: The Fifth IEEE Pulsed Power Gonference, Arilington, Virginia, June 10-12, 1985;664
[6]	Tanaka H, Obara M. Efficiency characterization of repetition-rated magnetic modulators for pumping TEA CO2 iasers end KrF excimer lasers. The Sixth IEEE Pulsed Power Conference, Arilington, Virginia, 1987;719
[7]	Mathias, R A, Williartn E M. Economic design of saturating reactor magnetic pulsars. Trnns Amer IlVL Electr Eng, Part I(Gommunicetions and Electronic), New York, 1955;74(18):169
[8]	Bredenkemp G L., Swart P H. A theoretical basis for the optimization of electromagnetic pulse compressors using saturable ferrornsgnetic rnres. Pros 18th IEEE Power Modulator Symposium, Hilton Head, SC, U S A, June 1988:90
[9]	Smith C H. Magnetic lossers in metallic glasses under pulsed excitation, IEEE Trans on Nuclear Science, NS-30, Part Ⅱ,1983;(4):2918
[10]	Smith C H, Nathasingh D, Liebermann H H. Thickness dependence of magnetic looses in amorphous FeBSiC ribbon under step dB/dt megnetization,IEEE Trans.Magnetics, MAC-20, 1984;(5):1320

Optimum design of magnetic pulse compressors

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views