Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 39 Issue 6
Sep.  2015
Article Contents
Turn off MathJax

Citation:

Design of new type adiabatic micro-ring harmonic cavity low-power silicon modulator

  • Received Date: 2014-09-15
    Accepted Date: 2015-01-11
  • For the purpose of improving the structure of adiabatic micro-ring resonator and reducing the resonator cavity loss, a new carrier injection/extraction structure was proposed based on adiabatic transition curve. After theoretical analysis and experimental verification, the data of resonant full wave at half maximum(FWHM) of the adiabatic micro-ring resonator, extinction ratio and frequency response parameters were obtained and compared with the loss of a traditional micro-ring resonator. The results show that FWHM of the adiabatic ring with outer radius of 2m is only 29.5% of that of a traditional micro-ring, the constrained bandwidth of resistance and capacitance increases 4 times, extinction ratio is 13.5dB and energy consumption is 5.1fJ/bit under modulation speed of 10Gbit/s. This research is helpful to improve the frequency response and reduce the power consumption of an adiabatic micro-ring resonator significantly. The study on adiabatic transition and carrier injection/extraction structure can further improve the performance of the adiabatic micro-ring, and push the development of low energy consumption research.
  • 加载中
  • [1]

    ZHU M X. MOS capacitive silicon electro-optic modulator high k gate dielectric layer research and design [D]. Wuhan: Huazhong University of Science Technology, 2009:8-10(in Chinese).
    [2]

    REED G T, MASHANOVICH G, GARDE F Y, et al. Silicon optical modulators[J]. Nature Photonics, 2010, 4(8): 518-526.
    [3]

    DONG P, CHEN L, XIE Ch J, et al. 50Gb/s silicon quadrature phase-shift keying modulator[J]. Optics Express, 2012, 20(19):21181-21186.
    [4]

    WATTS M R, ZORTMAN W A, TROTTER D C, et al. Vertical junction silicon microdisk modulators and switches[J]. Optics Express, 2011, 19(22): 21989-22003.
    [5]

    ZHAO Y, MA K Zh, YANG D Ch, et al. Research of vernier effect of ring resonator in sensor fields [J]. Laser Technology, 2014, 38(3): 293-296(in Chinese).
    [6]

    CHEN K, ZHU D X, ZHANG P C. Mode analysis of laser resonator based on finite element matrix [J]. Laser Technology, 2014, 38(3): 352-356(in Chinese).
    [7]

    DONG P, CHEN L, CHEN Y K, et al. High-speed low-voltage single-drive push-pull silicon Mach-Zehnder modulators[J]. Optics Express, 2012, 20(6):6163-6169.
    [8]

    YI H X, LONG Q F, TAN W, et al. Demonstration of low power penalty of silicon Mach-Zehnder modulator in long-haul transmission[J]. Optics Express, 2012, 20(25): 27562-27568.
    [9]

    XIAO X, LI X Y, XU H, et al. 44Gb/s silicon micro-ring modulators based on zigzag PN junctions[J]. IEEE Photonics Technology Letters, 2012, 24(19): 1712-1714.
    [10]

    DING J F, CHEN H T, YANG L, et al. Ultra-low-power carrier-depletion Mach-Zehnder silicon optical modulator[J]. Optics Express, 2012, 20(7):7081-7087.
    [11]

    BIBERMAN A, TIMURDOAGN E, ZORTMAN W A, et al.Adiabatic microring modulators.Optics Express,2012,20(28):29223- 29236.
    [12]

    ROSENBERG J C, GREEN W M J, ASSEFA S, et al . A 25Gbps silicon micro-ring modulator based on an interleaved junction[J]. Optics Express, 2012, 20(24): 26411-26423.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(6071) PDF downloads(522) Cited by()

Proportional views

Design of new type adiabatic micro-ring harmonic cavity low-power silicon modulator

  • 1. Modern Educational Technology Centre, East China Jiaotong University, Nanchang 330013, China

Abstract: For the purpose of improving the structure of adiabatic micro-ring resonator and reducing the resonator cavity loss, a new carrier injection/extraction structure was proposed based on adiabatic transition curve. After theoretical analysis and experimental verification, the data of resonant full wave at half maximum(FWHM) of the adiabatic micro-ring resonator, extinction ratio and frequency response parameters were obtained and compared with the loss of a traditional micro-ring resonator. The results show that FWHM of the adiabatic ring with outer radius of 2m is only 29.5% of that of a traditional micro-ring, the constrained bandwidth of resistance and capacitance increases 4 times, extinction ratio is 13.5dB and energy consumption is 5.1fJ/bit under modulation speed of 10Gbit/s. This research is helpful to improve the frequency response and reduce the power consumption of an adiabatic micro-ring resonator significantly. The study on adiabatic transition and carrier injection/extraction structure can further improve the performance of the adiabatic micro-ring, and push the development of low energy consumption research.

Reference (12)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return