A precise guiding method for automatic measurement with visual guiding theodolites
-
1.
State Key Laboratory of Precision Measuring Technology and Instrument, Tianjin University, Tianjin 300072, China
-
Received Date:
2014-07-10
Accepted Date:
2014-08-20
-
Abstract
In order to improve measurement efficiency in visual guiding theodolites, a precise guiding method based on camera optical axis was put forward. After calibrating the double-theodolite measuring subsystem and vision guiding subsystem , the system was guided initially according to the theoretical design of workpiece modulus file. Then by using digital image processing technology, the characteristic center point of the camera filed of view was distinguished and the relationship between the characteristic center point and the image center (i.e., the camera optical axis) was obtained so that vision measurement subsystem can be guided to point the characteristic center precisely. According to the calibration relation, the angular deflection between both theodolites was obtained and the theodolites were made to intersect at the target point precisely. The results show that the method can make sure automatic measurement accuracy of the system at 0.3mm and improve measurement efficiency of the system.
-
-
References
|
[1]
|
PEGGS G N, MAROPOULOS P G, HUGHES E B, et al. Recent de- velopments in large-scale dimensional metrology[J]. Proceedings of the Institution of Mechanical Engineers, 2009, B223(6): 571-595. |
|
[2]
|
CUYPERS W, van GESTEL N, VOET A, et al. Optical measurement techniques for mobile and large-scale dimensional metrology[J]. Optics and Lasers in Engineering, 2009, 47(3): 292-300. |
|
[3]
|
MAUTZ R. Overview of current indoor positioning systems[J]. Geodesy and Cartography, 2009, 35(1): 18-22. |
|
[4]
|
HOPE C, MARCELO C. Manual total station monitoring[J]. Geotechnical News, 2008, 26(3): 28-30. |
|
[5]
|
WANG Z, MASTROGIACOMO L, FRANCESCHINI F, et al. Experimental comparison of dynamic tracking performance of iGPS and laser tracker[J]. The International Journal of Advanced Manufacturing Technology, 2011, 56(1/4):205-213. |
|
[6]
|
ZHOU F Q, ZHANG G J, JIANG J. Three-dimensional coordinate measuring system with bino-theodolites on site. [J]. Chinese Journal of Mechanical Engineering, 2004,40(1): 165-169(in Chinese). |
|
[7]
|
ZHANG Z L. Study on the large-scale space coordinate measurement method based on vision guidance[D].Tianjin:Tianjin University, 2010:42-46(in Chinese). |
|
[8]
|
LONG W H, ZHAI C. The principle of spatial forword intersection and discussion about Its applications [J]. Metrology Measurement Technology, 2006, 25(6): 51-54(in Chinese). |
|
[9]
|
ZHANG Zh Y. A flexible new technique for camera calibration[J]. IEEE Xplore, 2000, 22(11): 1330-1334. |
|
[10]
|
FU J, CHU W, DIXSON R, et al. Three-dimensional image correction of tilted samples through coordinate transformation[J]. Scanning, 2008, 30(1): 41-46. |
|
[11]
|
YAN B, WANG B, LI Y. Optimal ellipse fitting method based on leastsquare principle [J]. Journal of Beijing University of Aeronautics and Astronautics,2008,34(3):295-298(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: