Parameters determination method in three-coordinate laser measurement technical specification
-
Corresponding author:
LI Ming, robotlib@shu.edu.cn
;
-
Received Date:
2014-01-06
Accepted Date:
2014-03-21
-
Abstract
In order to determine the optimal parameters for three-coordinate laser measurement, and get better measurement effect, theoretical analysis and experimental verification were conducted based on the orthogonal test. The best performance could be achieved under the conditions of speed at the tenth fastest set, frequency at 30Hz, optimum depth-of-field and angle perpendicular to the surface of the workpiece. The results show that it becomes easy to choose parameters in the three-coordinate laser measurement, after qualitative analysis and quantitative analysis.
-
-
References
|
[1]
|
LI H Q. Application of coordinate measuring technology in automobile industry [D].Tianjin: Tianjin University, 2004:1- 2(in Chinese). |
|
[2]
|
LIU Y F. Study on the key techniques for autobody parts measurement with laser triangulation [D].Jilin: Jilin University, 2007:8- 10(in Chinese). |
|
[3]
|
LI M, FEI L N. Geometric coordinate measurement technology and application[M].Beijing: China Zhijian Publishing House, 2012:151-152(in Chinese). |
|
[4]
|
CAO X. Study on the key techniques for autobody measurement specification[D]. Shanghai: Shanghai University,2013:6- 7 (in Chinese). |
|
[5]
|
ZHANG G Y,SUN T X,WANG L Y. Theoretical analysis on the three coordinate measuring system[J].Journal of Mechanical Engineering,2007,20(2):101-103(in Chinese). |
|
[6]
|
XU Z A, WANG T B, LI Ch Y, et al. Introduction of orthogonal experiment[J]. Sci-Tech Information Development Economy,2002, 12(5):148-150(in Chinese). |
|
[7]
|
DONG C Q. Orthogonal experiment[J].Yuncheng College Journal,1993(4): 17-19(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: